Jump to content


Recommended Posts

Posted

Hi all i'm new to this site, my problem is my 2001 hilux with 3rzfe is idling too high around 1300 rpm

 i have swapped throttle body complete with IAC valve& TPS

2x iac valves test ok

replaced both inlet gaskets

replaced temp coolant sensor (new)

replaced spacer cups in head that hold injectors

replaced injector seals- orings

emptied can of throttle body cleaner looking for vac leak/s

no codes or cel display

checked / renewed vac hoses

Any other LUX owners or GURUS have any ideas, PLEASe

Posted

Only just bought it. been unregistered for 12 months. dont know any history, no mods on engine all looks standard under the bonnet

Posted

Ahhh, fixing someone else's problems..

Which temp sender did you replace? There is one for the gauge and one for the ECU.


Posted

yes bought it cheap however??????

I replaced the sensor at back of block for ecu, not gauge sender

Posted

Does the idle drop down eventually once the engine gets warm?  A lot of people owning a Toyota for the first time seem to be put-off by the cold idle speed...

Posted

No it stays the same warm or cold doesn't fluctuate at all really, drives fine no hesitation

Posted

Not sure what it's is like on the Hilux, but have you bled the cooling system to make sure there aren't any air bubbles?  Classic issue for Toyotas where air in the coolant hoses cause the cold-idle system to not function properly

Posted

Thermostat seized (half a mm open)??? False temp sensor reading ??? Hopefully

  • 6 years later...
Posted
On 6/7/2016 at 5:37 PM, Toby said:

Thermostat seized (half a mm open)??? False temp sensor reading ??? Hopefully

Hey mate! have you found the high idle problem on your hilux? what was it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership