Jump to content

Recommended Posts

Posted (edited)

Hi guys, ive just bought a 2010 Toyota Aurion Touring Auto MY10, it has clear tail lights and I noticed there are a heap of bugs in them.

A) How do I get them out?

B) How do I stop them getting in again.

Thanks in advance for your help

 

Gav

Rear Tail Lights.JPG

Edited by Gavin Smith
Uploaded a picture
Posted

I am expecting that the tail lights are just about a sealed unit but the bugs must have got in by some means e.g. drainage vent/hole.

I would try removing a tail light and then using a vacuum cleaner to try and suck the bugs out.

Posted

I agree with the above.

i had a similar issue with my 40 series.

i used a combination of vacuum and air line.

so basically remove it the put the vacuum over the bulb hole and suck out what you can, don't seal it off completely allow some air to get in other wise you won't get anywhere.

do the same with the air blower.

Or if you have done the rear fog light mod, put the vacuum over one hole and make sure it's as sealed as possible, and use the blower in the other.

 

as for not letting them back in, just make sure it's sealed up completely when it goes back in and regularly wash your car and never park near trees.

Posted
On ‎8‎/‎09‎/‎2017 at 5:50 AM, 07Prodigy said:

as for not letting them back in, just make sure it's sealed up completely when it goes back in and regularly wash your car and never park near trees.

There's the problem, they need to breathe or condensation builds up. This speeds up corrosion of the bulb carriers and wiring.


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership