Jump to content

ebay and CAI'S

specialized32
 Share

Recommended Posts

specialized32 Veteran

specialized32

Posted
Posted

im not going to start the whole CAI debate but im curious as to why is Injen more expensive than AEM on e-bay? arent they relativley the same? Reason is i want to buy one of the two but the shipping is so damn expensive with the Injen but why is the AEM cheaper even with shipping, cause its not as good? I have read previous posts and cant seem to find an answer so who has AEM? Will it fit an 05' without removing the foggie? I know injen you have to...Just opinions please the other posts got nasty :lol:

NIKICH Grand Master

NIKICH

Posted
Posted

I have the AEM but i have a pre-facelift model, it would have been easier to put the filter on if we removed the foggie, but as hard as Dylan tried to remove the foggie it just wouldnt budge....

I dont know what the differences are, they look pretty much the same...

vvti16v Mentor

vvti16v

Posted
Posted

Item: AEM Cold Air Intake 02-04 Toyota Matrix XRS (200002716272)

This message was sent while the listing was active.

raceoptions is the seller.

Hi

I am emailing you regarding your shipping to Austrailia. With USPS global EMS [3-5 business day shipping, It will cost $85.00. This service also comes with a tracking # and will be given to you when your item is shipped. We prefer to use this carrier because it has never given us a problem. If you have any questions feel free to ask.

Thank you

Respond to this question

Responses in My Messages will not include your email address.

Thank you,

eBay

Details for item number: 200002716272

Item title: AEM Cold Air Intake 02-04 Toyota Matrix XRS

Item URL: http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...ADME:L:RTQ:AU:1

End date: Thursday, 06 Jul, 2006 15:35:30 AEST

Marketplace Safety Tip

jade Community Regular

jade

Posted
Posted

hi... got my aem cai of raceoptions two months ago..... it was relatively cheap.... cost me a total of AU$245 including postage..... postage was only $60US.... drop them an email and they will come down in price if you deal outside of ebay ;)

they were great to deal with....


Kevsta Veteran

Kevsta

Posted
Posted

im not going to start the whole CAI debate but im curious as to why is Injen more expensive than AEM on e-bay? arent they relativley the same? Reason is i want to buy one of the two but the shipping is so damn expensive with the Injen but why is the AEM cheaper even with shipping, cause its not as good? I have read previous posts and cant seem to find an answer so who has AEM? Will it fit an 05' without removing the foggie? I know injen you have to...Just opinions please the other posts got nasty :lol:

Check out the dyno runs for each on their respective websites. With the AEM from memory there was a drop in torque under standard setup below 3000 rpms... I'm guessing that injen don't have this drop in torque hence why they're more expensive.

specialized32 Veteran

specialized32

Posted
  • Author
Posted

thanks for the help guys yes AEM is cheaper but im guessing you get what you pay for and i have heard all good comments from both Injen and AEM so il check there web site out and make a decision that way thanks for the heads up on race options the sell both intakes :)

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted

Out of curiosity just how much are they wanting for the AEM over the Injen and also how much are they slugging you for freight? Other members may be wanting to see the difference in prices too. :D

specialized32 Veteran

specialized32

Posted
  • Author
Posted

For an Injen 335 shipped and a AEM 235 shipped so its a considerable difference hence why i am little apprehensive on my choice :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership