Jump to content


Toyota Aurion Double Din???

myztik

By myztik
in Aurion / TRD Aurion Club

 Share

Recommended Posts

myztik Experienced

myztik

Posted
Posted

Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put

in your after market head units?

The other day I popped down to Big Rock Toyota (Perth) and asked the guy that worked at parts department and

it doesn't seem to have any knowledge of Toyota making these. Instead he gave me the layout of the current

face I have on atm.

My question is, is it coz the guy is unaware that Toyota produce these or because they genuinely do not make it?

Coz I would buy from Toyota if they do make it rather than buying form Ebay. Its just the fact that I would feel

a lot calmer doing this way knowing that it came straight from Toyota.

cheers guys
dannywss Grand Master

dannywss

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

AcoustiK Mentor

AcoustiK

Posted
Posted

Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

dannywss Grand Master

dannywss

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..


fatsatman Collaborator

fatsatman

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

yes they definatly do them,, thyre around $30 odd bucks , height wise it will fit perfectly,but you will need to make up some fill in plates for the sides,, the opening is wider than double din,, go to toyota spares and ask for the extra fitting kit that is needed to fit the TOMTOM GPS headunit from the accessorys range ,, i think they call it the Follow me gps or something like that,,its a double din unit and then you buy the fascia your looking for as an extra requirement to fit it properly.unfortunatly the fill plates only come with the tomtom unit,, so you have to make something up.hope this helps.

JIN Mentor

JIN

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

fatsatman Collaborator

fatsatman

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

JIN Mentor

JIN

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

I know all the replies talking about you can get it from toyota BUT like I said i was just wondering

which one (exact kits or model name) I have to get if I buy it FROM AERPRO.

The reason why I was asking is I don't wanna be bothered of looking for the extra kit to fit it perfectly.

However, AERPRO has got all the pieces included and I don't need to look for any other extra stuffs.

MAYBE YOU DID NOT SEE THE QUOTE THAT I USED. :P

JIN Mentor

JIN

Posted
Posted
Penny Farthing!

Pardon my ignorance, but wtf is a double din facia?

Em..single/double din means all about size depends on ISO(International Organization for Standardization).

Let me just explain with picture without any jargon. :D

afe2ca300f.jpg

If you see the picture, there are 2slots (cd/dvd player & empty slot underneath).

If any of cd/dvd players uses 1 slot(like the picture), it means single din.

Sometimes, players are bigger than 1 slot and takes 2 slots, it is double din.

I hope this helps you to get what din means.

:)

fatsatman Collaborator

fatsatman

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

I know all the replies talking about you can get it from toyota BUT like I said i was just wondering

which one (exact kits or model name) I have to get if I buy it FROM AERPRO.

The reason why I was asking is I don't wanna be bothered of looking for the extra kit to fit it perfectly.

However, AERPRO has got all the pieces included and I don't need to look for any other extra stuffs.

MAYBE YOU DID NOT SEE THE QUOTE THAT I USED. :P

sorry ,,got you now,, but i'm not sure aerpro do one for the camry/aurion at all.

AcoustiK Mentor

AcoustiK

Posted
Posted (edited)
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

Yep , Melbourne City Toyota, it looks like its part of the car no doubt and feels like it too, and as said as before you need the spacers, the facia is not a standard shape, the car audio place i installed actually had the spacers to my suprise.

I was originally thinking or overlaying my interior panels, the silver bits to polished granite like what you get in the Honda accord and euro, looks so much better,

Edited by AcoustiK
dannywss Grand Master

dannywss

Posted
Posted

what i know is, i called Aerpro, they told me that they supply, so i just ordered and put onto my car for a 7inch alpine W202E..

IF you heard that they dont make it, mayb i was talking to and buying from alien.

will take a pic and show, asap.. ;)

Zee Progessing

Zee

Posted
Posted

I just bought one for my TRD from Toyota in Mt Gravatt Brisbane for $35.00. They call it a facia for DVD, sorry I do not have the part number handy.

  • 5 months later...
MeeM Explorer

MeeM

Posted
Posted

I just bought the double-din fascia plate from Toyota in Mt. Gravatt (Brisbane) too for my Camry Altise 2007 and the opening in the fascia is actually bigger than double-din. The opening is 8" wide by 4.5" tall. I think it's more for allowing other Toyota headunits to fit in, as opposed to any aftermarket double-din unit. You'll probably need some sort of filling piece to pad the opening if you use this face plate for a double-din unit.

Lunjiaow Mentor

Lunjiaow

Posted
Posted

I think the 09 Camrys/Aurions come out with the double din head unit and fascia now.

Those spacers you need, for installing aftermarket head units can be found in any car audio shops for roughly $20 which includes a pocket and two spacers.

  • 3 months later...
o12lando Experienced

o12lando

Posted
Posted

ok so how do I get one of these facia's in Perth?

Oh and hello everyone! I was a member of this site but I had a corolla and now moved up to an Aurion!

akuma Grand Master

akuma

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

yes there is,

with an aftermarket facia its flat surface, but a genuwine is a bit curvy. hard to explain but if i come across any pics ill show.

  • 2 weeks later...
o12lando Experienced

o12lando

Posted
Posted

Hey guys,

In light of following the "Korman's How-To" on taking out the factory head unit (cheers for that :P), I've got myself a double din facia with a tray through a local dealer to put in an after market single din audio unit. However the tray is loose in terms of width of the facia's mouth but that's ok I'll just get it replaced.

My question is... Has anyone performed this yet by their own? If so could you share some light in to this matter? Will the mouth of the double din facia unit fit well with aftermarket head units?

Taking the stuff out of the dash board was somewhat satisfying.... :P

Appreciate the help!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    2. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    3. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    4. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    5. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    6. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    7. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    8. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    9. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    10. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
×
×
  • Create New...

Forums

News

Membership