Kenshin X

nice have u tried +33 on ur car? :P

what is the offset of your wheels? :D

hehe :P

how much for the catch can alone and which springs are the KYBs suitable for?

lol nice. gimme a text, johnny might come with us too of course! :D bring da chaser!!!

dw man i'm usually bloody damn early becuz of my son LOL. u can just meet me there if you want. i know its very early just letting you folks know and i wanna get my car dynoed and not have to wait for 10 billion hours.

1. ring around lots of them in melbourne look yellow pages 2. can u manually pull the antenna out? 3. no short cuts, need it replaced :P

hello high flyer :) should come to our dyno day this sunday and meet the crew :)

i'm gonna be at sunshine vicroads car park at 9.45am. we start to head there at 10am. its going to be chokas so we better get in early or else we gonna be waiting forever for a power run :P anyone else wanna roll with me just post here. kthxbai :) p.s. my mobile number is 0433 991 799

wow that actually looks quite nice.. well done mate!

it was for facelift only anyway oh yeah true, i just reading up on it and they are different :) i'm thinking of fabricating my own since these are soo rare, paint it either red caliper or colour code it and chuck a TRD sticker on it HAHA :P

omg... i didnt know u had the c-one cooling panel... :( i would have taken it off you when i got the seats.

which sunshine carpark ? vic roads you mean ? yes

so the west side boys meet at sunshine car park as per usual? let me know if ur down. i'm gonna be trashed from the night before so excuse me if i'm abit odd that day :P

reserved for future revision ;)

15. put everything back in the reverse order and your finished! oh and while your at it, maybe get a stubby antenna to replace the remote control one Now you guys are probably thinking why the hell to go through all this trouble pulling out stuff which takes almost 1 hour to do a 5 minute swap? reason is simple. so that you can get some room to replace it without having to crease the damn carpet! its not a pretty site when you crease it because its staring in your face all the time <_< that is all and hope you dont break the base again! :P enjoy! ;)

Now the carpet should be hanging with no support up til the side pillars between the front and rear doors 10. now CAREEFULLY lower the carpet to access the nut that is holding the base of the antenna here. to show you how easy it is to crease the carpet, i just gently pulled down the carpet and got abit impatient and creased the right part of the carpet near the hanger and had to stuff fabric to push out the crease again 11. when the bolt is loose, u need to yank it off as its held on by a claw. 12. disconnect the 2 wires leading to the base of the antenna and push them off the clips. 13. with your fingers push from the bottom up the base and then it should pop out from the top. remove it and the wires together. 14. now this is optional but i found that while my antenna was off i'd detail and clean up around the area so its nice and smooth ready for the new antenna base to go on.

Disclaimer: Neither TOCAU or I take any responsibility whatsoever if you damage your car in anyway during this DIY. Do this at your own risk! Hey folks, I thought i might do this DIY for those who have broken thier base antenna on the zze corolla. I bought the base antenna from wreckers ages ago but finally grew some balls to replace the broken one :P here is the broken antenna base. see how i tried to super glue and mould it on again :P things you need: ratchet set with 10mm and 14mm sockets shifter spanner a fork gloves (if you're afriad to get dirty) 1. Take out the rear seats. This is done by unhooking the bottom parts and unbolting the back rest. there are 4 (14mm bolts) holding each back part of the rear seats. take these out and put them aside. 2. remove the spare wheel and the jack holder and the accessories holder (2 x 10mm nuts) 3. remove the plastic part of the boot where the boot latches on by removing the 2 hook harnesses using the 10mm socket 4. remove the thing that folds down on the reat seat behind it by using the fork to flick out the clips on each side 5. revove the 10mm bolt holding the part where the seat belt rests when not in use and lift the bolster out of the hook 6. remove the 10mm bolt holding boot ling on either side. and unclip (taking care not to break any clips) the trim off. 7. remove the 10mm bolt holding the upper part of the lining. 8. with the clothes hangers in the rear, flick out the plastic to access the 10mm bolt and undo these on both sides. 9. with the fork again, flick out the 3 clips holding the carpet lining near the brake light.

put back the orange??? :D

that was quick

3. 05 which is only facelift models. unless u still want it, that cancels everything else :P

nice job on the grill! if i had a facelift stivo i would try this out for sure :D

me 8 months <_<