Jump to content

Rear Skirt

tidy
 Share

Recommended Posts

tidy Explorer

tidy

Posted
Posted

Hey all, i spoke to a few people in my area to do wit a rear skirt. I went to my local toyota dealer, i was told by a few people that you could purchase these from toyota themselves. I turned up and they went through log books and went into the websites but in the end they said sorry we cannot find it try some asian guy in liverpool. I was pritty annoyed that they turned me away. What is a good place to check one of these out? i live in sydney CBD and sometimes work at liverpool.
Rolla_Boy Veteran

Rolla_Boy

Posted
Posted

Haha thats funny, which one did you go to? I bought mine from Castle Hill toyota for about $300 i think... dont get them ot install and paint it

kolourhero Grand Master

kolourhero

Posted
Posted

Part number: 0815812810

Now u can go back to that dealer and they'll know exactly what you're on about ;)


selyaT Grand Master

selyaT

Posted
Posted
Typical Toyota. I wouldn't be surprised if they didn't know what a Corolla was.

LOL! Brandon you clown :lol:

Dead Grand Master

Dead

Posted
Posted
Typical Toyota. I wouldn't be surprised if they didn't know what a Corolla was.

Stop giving me sigs lol

blk_05_stivo Enthusiast

blk_05_stivo

Posted
Posted
dont get them to install and paint it

Ive been thinking seriously bout getting a rear skirt, why you say dont get toyota to install and paint it?

Plus i live in tas so you reckon i could still order it from my local toyota or will they not be able to get it?

Cheers

kolourhero Grand Master

kolourhero

Posted
Posted
dont get them to install and paint it

Ive been thinking seriously bout getting a rear skirt, why you say dont get toyota to install and paint it?

Plus i live in tas so you reckon i could still order it from my local toyota or will they not be able to get it?

Cheers

Call them up, give them that part number and ask which toyota dealer in tas has it in stock. Im sure they can order it if they don't have any.

Dead Grand Master

Dead

Posted
Posted
dont get them to install and paint it

Ive been thinking seriously bout getting a rear skirt, why you say dont get toyota to install and paint it?

Cheers

Because they're Toyota.

They'll take it to the cheapest paint shop they can find, and then charge you over the hill for it most likely.

You may as well pick out the paint shop YOU want and get them to do it.

I love Toyota as a manufacturer. Some their dealers are worse than the Russian Mafia though unfortunately.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Tyre Sale Specials

      Tried to search prices on mycar website & nothing would load Tyroola also has 15% off site wide. Some good prices depending what your looking for https://www.tyroola.com.au/
      L4WL3SS in Club Lounge
    2. 0

      overheated engine

      I drive a 2010 series 200 sahara V8 automatic. I recently towed a small caravan on a not that hotter day. The temperature gauge went to about half then dropped back to normal. The motor then went into limp mode and eventually stopped. On lifting the bonnet i noticed the top radiator tank had split all the way across. I have only two months ago had the complete cooling system checked with no defects. I called the RAA in South Aust and they tried to start it but just turned over but did not fire up. It was still pretty hot. I have been told the motor would be ruined by overheating. The car has been sitting at the repairers for 5 days now and as far as i know it has not been attempted to start. Before putting a new motor in it would it be worth putting a new radiator in it and see if it will fire up? Open to any suggestions at this stage.
      wayne m in Landcruiser Club
    3. 1

      1996 Trueno XZ - Is it worth modding?

      Depends on how common/rare they are in your part of the world. The XZ trim was the second-lowest so didn't come with most of the fun bits that the full-fruit BZG/V/R models did, so it's not anywhere near as desirable stock but sometimes you have to make do with what you can find, plus you shouldn't feel as guilty modding the heck out of it since most of it isn't special.
      Hiro in Classic Toyota
    4. 62

      VSC, Traction Control, Check Engine lights all on

      I attended Toyota Preston for Aurion ATX 2013 major service today. Cost $~$1300. On the way home I stopped to pick up dinner. Two fault lights: engine and VSC lights came on when I restarted the car. Car drove home just fine. I can only return the car tomorrow for them to sort out. Annoyed. Let’s see if they’re still on in the morning.
      57John in Aurion / TRD Aurion Club
    5. 1

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    6. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    7. 1

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    8. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    9. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    10. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
×
×
  • Create New...

Forums

News

Membership