and1's ride. Silver FTW!!!

[Maximas]

And something else that will be going on in the near future:

Super duper thanks goes to Chicken for this. They are simply awesome.

DUDE! That light looks so damn fine. Where on earth can I get myself one of those?

[and1]

And something else that will be going on in the near future:

Super duper thanks goes to Chicken for this. They are simply awesome.

DUDE! That light looks so damn fine. Where on earth can I get myself one of those?

They are custom made by another member off here. I was just lucky enough to buy them off him :D

[ruimond]

The lights look great andy, good to see your snapped them up. I thought you and other Andy missed out of them. But it seems you got them anyway. Good stuff! Will look good on your car.

[chicken]

:D

[cypher]

so it was you !!!!!! damn u chicken u lied to me !!! hahahah thought u sed it didnt fit on stivoz :(

ahh oh wells imma gonna get u to do it to mine =P

[chicken]

so it was you !!!!!! damn u chicken u lied to me !!! hahahah thought u sed it didnt fit on stivoz :(

ahh oh wells imma gonna get u to do it to mine =P

sorry cypher when you asked me i didn't think it was possible at the time... but lesson learnt, anything is possible :) took a while though

[and1]

And it took more work after we were finished.

Thanks again Cheng.

Just waiting on the car to be repaired so I can put everything on

[nemesis2zz]

your ride looks awesome

[dyslexik]

Pics of the Fumoto oil drain valve:

Would the gasket/crush washer ever need to be replaced with a new one?

Do you use a hose clip or cable tie to keep the lever more secure?

[and1]

Pics of the Fumoto oil drain valve:

Would the gasket/crush washer ever need to be replaced with a new one?

Do you use a hose clip or cable tie to keep the lever more secure?

No and no. Just as is and it works fine.

[and1]

New goodies.

Goodridge braided brake lines

Vared flashing LED. Will be hooked up to my immobiliser

[whitestivo]

how are those 16X8's going on the front?

whitestivo

[ELEGNT]

yeh hes not scared! you should hurry up and get some phil

[Mole]

Nice, those brake lines ADR approved? They look s**** and Goodridge is a good brand...

Edit: Forum edited out sw_ank, come on!

Edited June 29, 2010 by Mole

[and1]

how are those 16X8's going on the front?

whitestivo

Well you take off the other wheels and then you pop them on :P

We shall see. Might have to raise the car to make it fit plus spacers

Also gonnna stretch the T1Rs on for now see how they fit.

yeh hes not scared! you should hurry up and get some phil

Yeah when there's a will theres a way.

Nice, those brake lines ADR approved? They look s**** and Goodridge is a good brand...

Edit: Forum edited out sw_ank, come on!

For a moment there I thought you said the other 's' word

Not sure if its ADR approved, but neither is my seat nor any of my other mods ;)

[whitestivo]

nice work, post up the progress, i'm on the look out for a bit of stretch myself

whitestivo

[and1]

Update.

Great news with the broken cam issue. Australia Post has finally paid me out pretty much fully. They even covered me for shipping. So I'm pretty happy.

PPE headers will be ordered soon as well as getting Aarons Power FC.

Hopefully ported head will be filled with new goodies soon.

Also, the stivo is going into the panel shop on monday to get new clothes put on. No more dents!

So progress is indeed happening. It's gonna be a interesting couple of months

[1stKill]

this is some good news,congrats...must be a drag cruising around with the hail damage for this long.

btw i did some tree work at some units/flats yesterday and there was a stock red 2008 Camry sitting in the driveway with some very bad hail damage,i didn't notice it until one of the boys at work pointed it out,fark it bought back some memories. :(

anyhooo hope all goes well with the repairs and you get her back looking all shmick again soon. :)

Cheers

Lee

[whitestivo]

So close to pulling the trigger on some 16x8's, if you have pics, pls pm me

I think the rears are fine, it's the front, i'm just not sure

whitestivo

[and1]

this is some good news,congrats...must be a drag cruising around with the hail damage for this long.

btw i did some tree work at some units/flats yesterday and there was a stock red 2008 Camry sitting in the driveway with some very bad hail damage,i didn't notice it until one of the boys at work pointed it out,fark it bought back some memories. :(

anyhooo hope all goes well with the repairs and you get her back looking all shmick again soon. :)

Cheers

Lee

Cheers Lee. She'll be looking better than she did before because there's a bunch of things waiting to go on

So close to pulling the trigger on some 16x8's, if you have pics, pls pm me

I think the rears are fine, it's the front, i'm just not sure

whitestivo

I still haven't put them on yet. As soon as my car comes back from the panel shop they are going on asap. It all depends on offset though if you want them to fit. You need something pretty aggressive.

[whitestivo]

agreed, if you stay legal, you need to run +42, that still takes away 26mm of inner clearance, so i just have no idea how to make it fit

cheers

whitestivo

[GReddy_ES]

Nice, those brake lines ADR approved? They look s**** and Goodridge is a good brand...

Edit: Forum edited out sw_ank, come on!

For a moment there I thought you said the other 's' word

Not sure if its ADR approved, but neither is my seat nor any of my other mods ;)

they should be ADR approved,i bought the same set for the Evo too and the supplier said that they are ADR approved :)

[Mole]

PPE headers will be ordered soon as well as getting Aarons Power FC.

Yay! Can pay off more debt!

they should be ADR approved,i bought the same set for the Evo too and the supplier said that they are ADR approved :)

Sweet, might think of getting a set myself, the brakes on the Supra are ok (if the Celica had no ABS, it'd be on par), but I think they need work, as much as I can anyways without changing calipers... but thats for another thread.

This things gonna be a lil pocket rocket, looking forward to seeing it all done. Good news with AusPost as well.

[and1]

agreed, if you stay legal, you need to run +42, that still takes away 26mm of inner clearance, so i just have no idea how to make it fit

cheers

whitestivo

What do you mean stay legal? Trust me you need to run more than a +42 to get it to fit. I'm gonna be running +38 and I'm afraid it won't be enough.

Nice, those brake lines ADR approved? They look s**** and Goodridge is a good brand...

Edit: Forum edited out sw_ank, come on!

For a moment there I thought you said the other 's' word

Not sure if its ADR approved, but neither is my seat nor any of my other mods ;)

they should be ADR approved,i bought the same set for the Evo too and the supplier said that they are ADR approved :)

Awesome thanks Adrian

[Lunjiaow]

Yeah goodridge is ADR approved. They are awesome. Have you got them in yet? It will be like stepping on a stone, nice and hard.

Edited July 24, 2010 by Lunjiaow