Jump to content

Toyota Aurion Double Din???

myztik

By myztik
in Aurion / TRD Aurion Club

 Share

Recommended Posts

myztik Experienced

myztik

Posted
Posted

Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put

in your after market head units?

The other day I popped down to Big Rock Toyota (Perth) and asked the guy that worked at parts department and

it doesn't seem to have any knowledge of Toyota making these. Instead he gave me the layout of the current

face I have on atm.

My question is, is it coz the guy is unaware that Toyota produce these or because they genuinely do not make it?

Coz I would buy from Toyota if they do make it rather than buying form Ebay. Its just the fact that I would feel

a lot calmer doing this way knowing that it came straight from Toyota.

cheers guys

dannywss Grand Master

dannywss

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

AcoustiK Mentor

AcoustiK

Posted
Posted

Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

dannywss Grand Master

dannywss

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..


fatsatman Collaborator

fatsatman

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

yes they definatly do them,, thyre around $30 odd bucks , height wise it will fit perfectly,but you will need to make up some fill in plates for the sides,, the opening is wider than double din,, go to toyota spares and ask for the extra fitting kit that is needed to fit the TOMTOM GPS headunit from the accessorys range ,, i think they call it the Follow me gps or something like that,,its a double din unit and then you buy the fascia your looking for as an extra requirement to fit it properly.unfortunatly the fill plates only come with the tomtom unit,, so you have to make something up.hope this helps.

JIN Mentor

JIN

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

fatsatman Collaborator

fatsatman

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

JIN Mentor

JIN

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

I know all the replies talking about you can get it from toyota BUT like I said i was just wondering

which one (exact kits or model name) I have to get if I buy it FROM AERPRO.

The reason why I was asking is I don't wanna be bothered of looking for the extra kit to fit it perfectly.

However, AERPRO has got all the pieces included and I don't need to look for any other extra stuffs.

MAYBE YOU DID NOT SEE THE QUOTE THAT I USED. :P

JIN Mentor

JIN

Posted
Posted
Penny Farthing!

Pardon my ignorance, but wtf is a double din facia?

Em..single/double din means all about size depends on ISO(International Organization for Standardization).

Let me just explain with picture without any jargon. :D

afe2ca300f.jpg

If you see the picture, there are 2slots (cd/dvd player & empty slot underneath).

If any of cd/dvd players uses 1 slot(like the picture), it means single din.

Sometimes, players are bigger than 1 slot and takes 2 slots, it is double din.

I hope this helps you to get what din means.

:)

fatsatman Collaborator

fatsatman

Posted
Posted
Hey,

I remember reading somewhere on forums that Toyota has genuine double din fascias for Aurion for $30; so you can put in your after market head units?

i dont think toyota made it, check Aerpro, they are the one who sell the $30 fascia kit.

this question is answered at least 3 times...

I am just wondering...

From Aerpro, which kit does exactly fit with aurion?

I am a bit confused because there is nothing for aurion and it seems like I have to get one of camry one right?

but which one?

YOU OBVIOUSLY HAVENT BEEN READING OTHER PEOPLES POSTS,,, ITS NOT AN AERPRO ITEM YOUR AFTER.

I know all the replies talking about you can get it from toyota BUT like I said i was just wondering

which one (exact kits or model name) I have to get if I buy it FROM AERPRO.

The reason why I was asking is I don't wanna be bothered of looking for the extra kit to fit it perfectly.

However, AERPRO has got all the pieces included and I don't need to look for any other extra stuffs.

MAYBE YOU DID NOT SEE THE QUOTE THAT I USED. :P

sorry ,,got you now,, but i'm not sure aerpro do one for the camry/aurion at all.

AcoustiK Mentor

AcoustiK

Posted
Posted (edited)
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

Yep , Melbourne City Toyota, it looks like its part of the car no doubt and feels like it too, and as said as before you need the spacers, the facia is not a standard shape, the car audio place i installed actually had the spacers to my suprise.

I was originally thinking or overlaying my interior panels, the silver bits to polished granite like what you get in the Honda accord and euro, looks so much better,

Edited by AcoustiK
dannywss Grand Master

dannywss

Posted
Posted

what i know is, i called Aerpro, they told me that they supply, so i just ordered and put onto my car for a 7inch alpine W202E..

IF you heard that they dont make it, mayb i was talking to and buying from alien.

will take a pic and show, asap.. ;)

Zee Progessing

Zee

Posted
Posted

I just bought one for my TRD from Toyota in Mt Gravatt Brisbane for $35.00. They call it a facia for DVD, sorry I do not have the part number handy.

  • 5 months later...
MeeM Explorer

MeeM

Posted
Posted

I just bought the double-din fascia plate from Toyota in Mt. Gravatt (Brisbane) too for my Camry Altise 2007 and the opening in the fascia is actually bigger than double-din. The opening is 8" wide by 4.5" tall. I think it's more for allowing other Toyota headunits to fit in, as opposed to any aftermarket double-din unit. You'll probably need some sort of filling piece to pad the opening if you use this face plate for a double-din unit.

Lunjiaow Mentor

Lunjiaow

Posted
Posted

I think the 09 Camrys/Aurions come out with the double din head unit and fascia now.

Those spacers you need, for installing aftermarket head units can be found in any car audio shops for roughly $20 which includes a pocket and two spacers.

  • 3 months later...
o12lando Experienced

o12lando

Posted
Posted

ok so how do I get one of these facia's in Perth?

Oh and hello everyone! I was a member of this site but I had a corolla and now moved up to an Aurion!

akuma Grand Master

akuma

Posted
Posted
Whether or not Toyota makes them or not, Toyota do sell it as a genuine part. it is around $30 bucks,

Obviously the guy doesnt know what he is talking about, perhaps ask for the Camry double din facia as well, as they may have listed in under that car.

I have one on my car to fit the Kenwood DDin unit.

u got it from toyota? any difference? very interested to know..

yes there is,

with an aftermarket facia its flat surface, but a genuwine is a bit curvy. hard to explain but if i come across any pics ill show.

  • 2 weeks later...
o12lando Experienced

o12lando

Posted
Posted

Hey guys,

In light of following the "Korman's How-To" on taking out the factory head unit (cheers for that :P), I've got myself a double din facia with a tray through a local dealer to put in an after market single din audio unit. However the tray is loose in terms of width of the facia's mouth but that's ok I'll just get it replaced.

My question is... Has anyone performed this yet by their own? If so could you share some light in to this matter? Will the mouth of the double din facia unit fit well with aftermarket head units?

Taking the stuff out of the dash board was somewhat satisfying.... :P

Appreciate the help!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    2. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    3. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    4. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
    6. 3

      Disconnecting winch, lightbar and UHF

      Okay this might be dumb but it the ground the negative?
      citrus__grove in Landcruiser Club
    7. 3

      Disconnecting winch, lightbar and UHF

      Disconnecting batteries, ALWAYS disconnect the ground wire first. Doing this will also disconnect power, in general. Herb
      ozieagle in Landcruiser Club
    8. 3

      Disconnecting winch, lightbar and UHF

      Hey guys, I’m wanting to disconnect my current winch, lightbar and UHF as I have new plans. I’ve installed a winch previously on another car so I get it’s a case of following the cables and disconnecting from the battery, etc but but safety wise, should I start by disconnecting the battery so the cables aren’t live orrrr? And if so how do it go this haha?
      citrus__grove in Landcruiser Club
    9. 1

      Snapping wheel and axle studs

      Put a set of standard wheels on it and your problem will disappear. It is critical that the hole in the wheel centre is a snug fit on the axle boss (without wheel nuts fitted). If your wheels are sloppy on the axle boss this allows excess force on your wheel studs and they will break, as yours are doing. If you are unsure of what to do, go to a reputable tyre shop and get assistance.
      32V8 in Landcruiser Club
    10. 0

      2zz idle / roughness when accelerating past 3k

      Hey everyone was hoping someone might be able to point me in the right direction with this issue I've been facing for a while now. My Celica's idle will drop down to almost 200rpm when stationery after hitting operating temperature. Pretty much feels like it's about to stall out but never actually does. When taking off from a set of lights it almost feels like it hesitates or is down on power and then all of a sudden it lurches forward and gets a boost in power again. Then again around 1,500-3,000rpm it feels down on power and in what I can only describe in the engine feeling scratchy. Past 3,000 rpm it gets a little boost in power again but still definitely feels down on power compared to what it used to be and still has that roughness. Note lift is also not working at the moment but I have changed the lift bolts, planning on cleaning the VVT and VVTL-i OCV's New engine mounts have been installed I changed the MAF sensor about 4 years ago albeit not OEM. After doing some research my main ideas now would be a New MAF this time OEM, TPS, IACV or Coil Packs (Changed plugs 50,000km ago) Any other suggestions would be greatly appreciated!!! :)
      ik04 in Celica Club
×
×
  • Create New...

Forums

News

Membership