Jump to content


bc coilovers height adjustment

Shadow_

By Shadow_
in Aurion / TRD Aurion Club

 Share

Recommended Posts

Shadow_ Proficient

Shadow_

Posted
Posted (edited)

Hi, i did a search but i found nothing... maybe it did show up but i didnt see it then im sorry.! my question is anyone have problem with the bc coilovers height adjustment? my front right and left is in the same height BUT my rear right and left is funny i use ruler to measure them both at the same height after i put my wheel on the right is lower the left is higher by 2cm ? is this a common problem or just normal? any help with be good thanks.

Edited by Shadow_
Shadow_ Proficient

Shadow_

Posted
  • Author
Posted (edited)

Sorry. Disregard this post.

Thanks ken i have use the same ideas like the one you posted..but i cant make then balance i think something wrong with my coilovers Edited by Shadow_
Kenshin X Grand Master

Kenshin X

Posted
Posted

just be mindful the weight of various things will affect the way it sits. not just out the same measurements for all the corners and expect it to be sitting even. my coils were wonky and i had to adjust separate one at one time. frustration mounted when i moved one and the other ride height changed on the other corners. i finally got it the way i wanted and that's sitting a bit lower on the rear. so when i do take seats out for track sessions the car sits evenly.


Adamsy Grand Master

Adamsy

Posted
Posted

Lol frustrating is the word! Mine sits slightly higher at the back and also slightly higher by a few mm's on the passenger’s side.

Adamsy Grand Master

Adamsy

Posted
Posted

Just for a sh!t giggle i just measured a 40 series touring here in the showroom and it's all over the show too.Measuring from the centre of the wheel on the ground to the centre of the guard lip: LHF 71.5cms, LHR 72.5cms, RHR:72.25cms, RHF 70.5cms.

Adamsy Grand Master

Adamsy

Posted
Posted

above post was edited? ummm

umm no? they are two seperate posts lol :g:

DJKOR Grand Master

DJKOR

Posted
Posted

He's referring to his own post. I modified it because it wasn't specific to the original post.

Adamsy Grand Master

Adamsy

Posted
Posted

He's referring to his own post. I modified it because it wasn't specific to the original post.

oooooooo, that's my bad lol

Kenshin X Grand Master

Kenshin X

Posted
Posted

OH I JUST READ THIS OP AGAIN. sorry was maybe drunk when i was reading it. but then i answered it in my later post ROFL............ -_-

thanks D. maybe people reading thought i was on drugs :spiteful:

Shadow_ Proficient

Shadow_

Posted
  • Author
Posted

above post was edited? ummm

lol ken i got few typo so i corrected.
Shadow_ Proficient

Shadow_

Posted
  • Author
Posted

Just for a sh!t giggle i just measured a 40 series touring here in the showroom and it's all over the show too.Measuring from the centre of the wheel on the ground to the centre of the guard lip: LHF 71.5cms, LHR 72.5cms, RHR:72.25cms, RHF 70.5cms.

yeah adam this problem drive me crazy sometime but i have my guard roller front and rear it did not fix my problem wasted money for nothing.... im on 245-35-20 rim is 45mm off sets at my level of height the tyre hit the pastic holder everytime my 2 small sister seat at the back.. some time the front if you pull off the soft plastic from the guard you will see a bolts and a plastic thingy holds the body kits that plastic is way too long everytime the tyre bounce it touch the plastic holder i hope dont break it soon.. 235 tyres i think is a good idea to avoid hitting it..
  • 3 weeks later...
Boondy Community Regular

Boondy

Posted
Posted (edited)

Hey guys,

Could i get some feed back on ride quality for these BC Coilovers for our Aurions?

I had BC's on my AE86 and it was suprisingly soft but firm. (nice)

D2's on my R33 were hard and handled like it was on rails.

So, Feed back please??? LOL

Like, is it really going to upset the experiance if driving the car?

Ps: i hope it feels nice like the AE86

Cheers Guys

Edited by Boondy
bigVAN Grand Master

bigVAN

Posted
Posted

Hey guys,

Could i get some feed back on ride quality for these BC Coilovers for our Aurions?

I had BC's on my AE86 and it was suprisingly soft but firm. (nice)

D2's on my R33 were hard and handled like it was on rails.

So, Feed back please??? LOL

Like, is it really going to upset the experiance if driving the car?

Ps: i hope it feels nice like the AE86

Cheers Guys

have a read up on this :

Boondy Community Regular

Boondy

Posted
Posted

Hey guys,

Could i get some feed back on ride quality for these BC Coilovers for our Aurions?

I had BC's on my AE86 and it was suprisingly soft but firm. (nice)

D2's on my R33 were hard and handled like it was on rails.

So, Feed back please??? LOL

Like, is it really going to upset the experiance if driving the car?

Ps: i hope it feels nice like the AE86

Cheers Guys

have a read up on this :

Thank you Thank you Thank you Thank you

Great read up.

Cheers man :)

Shadow_ Proficient

Shadow_

Posted
  • Author
Posted

i would say they are pretty good. but my spring rate is custom order front 6kg rear 7kg im using front lvl13 damper rear lvl10 damper with a ultra-racing strut bar.. the car feel way better then stock BUT if your town have badass road, with also holes i dont think coilovers is a wise choice XD. BUT feel so good on the track lol once i turn up to lvl30 dampering driving on a nice new road omg ! i feel like driving something else not aurion mwhahahah

  • 2 weeks later...
Boondy Community Regular

Boondy

Posted
Posted (edited)

Well i finaly done it.

Im running 19x9 buddy club wheels with a mild +38 off set and dropped the car down using BC Gold coilovers on my Presara LOL.

The rear feels a little to bouncy and the front feel nicer. I dont know what setting the coilovers are set too yet but ill play around with it tomorrow...

Next plan is to raise it just a tad more and wheel spacers to flush the wheels to the guards. I dont have to have Hellaflush but almost would be nice...

Thanks for everyones help :)

Edited by Boondy
blakepure86 Proficient

blakepure86

Posted
Posted

Hey Guys

Just curious what is the lowest height someone with bc coilovers is running? i want to set a goal but unsure what is possible...

im chasing height of centre wheel to wheel arch, ground to wheel arch and lowest point?

Boondy Community Regular

Boondy

Posted
Posted

Hey Guys

Just curious what is the lowest height someone with bc coilovers is running? i want to set a goal but unsure what is possible...

im chasing height of centre wheel to wheel arch, ground to wheel arch and lowest point?

On my first installation the mud guards almost touched the ground. Maybe 2cm off the ground but im not sure how much more I could turn it down. But was very low.

I'll try how ya some photos of the Aurion soon.

(how do i attach photo here?)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    2. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    4. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    5. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    6. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    7. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    8. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    9. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    10. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership