Jump to content


Recommended Posts

Posted (edited)

hey all,

been on the forum for a while so decided to finally start a post about my ride. Purchase aToyota corolla sportivo 2005 when i was on my green P's,stock as rock and didn't do any mods to it until now.

ENJOY GUYS.

current mods:
- JDM rear break lights
- OEM sportivo rear lip
- Slime line window visor
- Stubby antenna (mazda cx-7)
- De-badge/matt black Toyota badges
- Tinted window (15% front / 5% rear)
- Excedy heavy duty clutch
- Short ram intake
- Leather recaros.
- Amber indicators
- Yellow tint foglights

- Eyelids/black housing headlights

- c-one wing tip

- BR BC coilovers

- DBA front rotors

- Bronze stock wheels

- TRD front strut brace

Future mods:
- exhaust system
-port and polish header

- port and polish manifold

- apexi power fc (not yet installed)

- change dash lights to LEDs

- paint wood grain effect center console

- rear torsion beam

- rear sway bar


That's all for now.


Before:
11062011039.jpg

After:
8nvb.jpg

twins01.jpg

Edited by GHOSTIVO

Posted

thanks guys.

a little update,i've brought a rear lip about 2 weeks ago from a member on the forum and fitted it on. last weekend i re-fitted it cause there was a gap between the lip & bar,so thanks to Sonny (ERC 10N) for the rubber seals and kenshin for the advice.

it was red so i sanded it down and primer it at work.left it to dry in the oven overnight.

lip01copy.jpg

rub it all down and sprayed it.

lip02r.jpg

final result with re-fitting and seals

lip04.jpg

These are the recaros that are in at the moment.

recaros.jpg

also some old photo

silverbue.jpg

bluered.jpg

cruises.jpg

rolla.jpg


Posted

Looking good there! Thats some good painting skills you got going on. Might need to borrow it some time =p

Posted

Nice work !

Now for some coilovers :)

Fixed :P

Posted

Looking good there! Thats some good painting skills you got going on. Might need to borrow it some time =p

thanks mate,im not the best painter but im getting there LOL.got some effects I've been doing at tafe,will upload picture soon,if you need anything painted or help with paint i'll be glad to help

Nice work !

Now for some nice rims :)

after the car is lowered,might just paint my stock rims a funky colour for the time being.

Nice work !

Now for some coilovers :)

Fixed :P

hahah real soon evo,just waiting for my tool allowance money to come in :P

Posted (edited)

ok guys,my wing tips are finally moulded on. Thanks heap to Luke (tafe teacher) that did the fibre glass/bog/sanding work for me. Will get it primer during this week.

wing03.jpg

wing02.jpg

wing01.jpg

Edited by GHOSTIVO
  • 4 weeks later...
Posted

Hey bro,

Its Carly's mate, Ryan. We should go for a cruise sometime..

Get some coilovers man, it'll change the whole look of your car.

Posted

Do you have a mate will spiky hair with a long mullet around cabbramatta?

Posted

those recaros.... did u retrim them or they came off like that from another car? what rails are they on?

  • 3 weeks later...
Posted

Hey bro,

Its Carly's mate, Ryan. We should go for a cruise sometime..

Get some coilovers man, it'll change the whole look of your car.

Hey Ryan.I should be getting coilovers in January hopefully

Do you have a mate will spiky hair with a long mullet around cabbramatta?

There's a few of them lol.cause I got a Mohawk with a long tail, that looks like a mullet if I don't tie it lol

those recaros.... did u retrim them or they came off like that from another car? what rails are they on?

Brought them off amate that had a sporting.he didn't want them anymore, the rails are custom welded on to fit straight into the sportivo

spotted that sportivo ERCION at 7/11 in fairfield west

Yeah he lives around there

  • 3 months later...
Posted

It has been a while since I've updated this page. Lots more mod has been done to the car. Brought eyelids off Andy (demonrolla) , decided to paint black housing ,yellow fog tints,ez -lip..

Will post up all pictures real soon :)

  • 1 month later...
Posted

Is your car lookin schmick now with your coil overs cuz?

Posted

Is your car lookin schmick now with your coil overs cuz?

Still need to go abit lower,I'll adjust it when I get new tyres on Thursday :)

  • 8 months later...
Posted (edited)

it's been way to long since i've posted here. Thought i'll update my ride since i've got a new computer LOL. Since now i've added eyelids, black housing, trd front strut brace, DBA front rotors, bronze stockies and power fc.

1. eyelids, once i brought them off Demonrolla and tested them on, the shape of the eyelids were out of line,so i sanded the edges to line them up and also got them primered at work. I then decided to paint them two tone so it can match with my bonnet and guard. the first layer of paint i put down was the black then masked up half way the black and sprayed the blue.

6v54.jpg

19jw.jpg

6b85.jpg

2.black housing. This was one of the hardest mods i did and im never doing it again. It took me 6 hours to do both headlight (note: get someone to help you it will be much quicker). Use a heat gun at the bottom part of the headlight, slowly heated it up and use a flat head screw driver to start plying it. After i got the lens off, i mask up the chrome part where the indicator was and sprayed the rest black using a spray can. After a few mintue of drying putted everything back together.also added extra silicone around the edges incase of leak.

ay8g.jpg

pc43.jpg

uhnb.jpg

s1qw.jpg

FINAL RESULT

rbmf.jpg

Edited by GHOSTIVO
Posted

Nice job loooks pro and mean

It took me 6 hours to do both headlight

LOL im sure my first time it took me longer :)

Posted

Nice job loooks pro and mean

It took me 6 hours to do both headlight

LOL im sure my first time it took me longer :)

thanks Defyant. LOL,i'm sure your really quick at it now hehe.. just wondering do you use the oven to take them apart??

Posted

thank Rich :D

Agreed with Luke... looks the goods

Love black housing - just like angry eyebrows.

another UPDATE : TRD front strut brace,To me it doesn't really do much and can't feel any difference. Only left it on cause it says TRD hehehe.

2spg.jpg

Also ordered BC BR coilovers and got them installed. Didn't like the height as it was still to high so went a tad bit lower.

tgvf.jpg

2mi8.jpg

I've been seeing so many sportivo with matt/gloss black stock wheels,so i thought why not do something that people don't really have and i came up with this bronze. The colour came from a BMW paint code which was the closest i can get to the jap rims (eg rays,te37 ). I also added more brown to the paint to make it a darker brown. DIY it myself with a mate helping me sand them down 600 wet and use red scotch bright with paste. Sprayed 2 coats of color and 1 coat of clear.

qctk.jpg

zfq9.jpg

xjsk.jpg

2gcs.jpg

(note:these were all done a while ago,thought i share it :D )

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership