Stickers Group Buy List

[RedLiner]

I had a little accident with one of mine...

so if anyone has a small spare white one...

ill have it if ur willing to give it...for $10

[iniff]

I had a little accident with one of mine...

so if anyone has a small spare white one...

ill have it if ur willing to give it...for $10

haha thats exactly why I got two. just incase i fudged it up. which i probably will.

[RedLiner]

Nah but i was going to put one on the front..and one on the back.....

lets just say i slipped when i was trying to put the one on the front on....

[eggbert_99]

I had a little accident with one of mine...

so if anyone has a small spare white one...

ill have it if ur willing to give it...for $10

haha thats exactly why I got two. just incase i fudged it up. which i probably will.

Have faith .... I though I was screwed as well ... but all good as you can see !!!

[iniff]

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

[Romp]

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

guys use soapy water underneath before u put them on !!!!

then u can iron out the bubbles AND move it to the right spot without fudging it!

lol

[eggbert_99]

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

guys use soapy water underneath before u put them on !!!!

then u can iron out the bubbles AND move it to the right spot without fudging it!

lol

its not that type of sticker ... this is on the outside ...

iniff - ... hmm maybe I also forgot to mention . before peeling anything off .... I used sticky tape to find the right position ... so I could stand back and have a look ... once you find the right position ... then I used some chalk to draw the line where i wanted it ..

then peel and stick according to the line ...

and use a credit card for bubbles ... take your time ..

sorry for not telling earlier .. i knew I forgot to post something ... though I already did it ...

[Romp]

I got mine on. off center and not straight. and to top it off there are bubbles underneath... hrmm

guys use soapy water underneath before u put them on !!!!

then u can iron out the bubbles AND move it to the right spot without fudging it!

lol

its not that type of sticker ... this is on the outside ...

iniff - ... hmm maybe I also forgot to mention . before peeling anything off .... I used sticky tape to find the right position ... so I could stand back and have a look ... once you find the right position ... then I used some chalk to draw the line where i wanted it ..

then peel and stick according to the line ...

and use a credit card for bubbles ... take your time ..

sorry for not telling earlier .. i knew I forgot to post something ... though I already did it ...

yer i know its on the outside.. same rule applies

ever watched them apply window tint? its basically a sheet of darkened plastic with adhesive

they spray the window with soapy water then squeegee it out. the adhesive dries and bonds to the window .. just leave it in the sun after ur done or use a hairdryer - but dont leave the hairdryer on too long or the sticker will shrink and curl

[eggbert_99]

really?? ... but wont the letters lose the adhesive when its wet ????

[Romp]

really?? ... but wont the letters lose the adhesive when its wet ????

yer it wont be as permanent - but it stays on

ive got a sticker atm that is just a vinyl and it stays on - no adhesive

and it think once ur one with adhesive dries itll be sweet

Anyone else wanna confirm?

[eggbert_99]

id try it .. but I only bought 1 sticker .....

[blue_rolla]

ill confirm the soapy water technique... me and a mate put a GT stripe on his car made of vinyl, and we used some combination he made up of like water, soap and something else (maybe metho?), and we could slide it around to where we wanted it and then he just used a tool (credit card does the same trick) to flatten it out and iron out the bubbles...

and don't worry pete, i'll just get it at villawood on the 29th... kinda wanted it for the cruise, but i'll forgive you this once... :P

[xoom]

ok guys ive gotten word that there are a few people that mucked theirs up ....

Ydoit4 & redliner ... anyone else ?

And i know bill (SyxXPaC) you also wanted to get some stickers .....

If we can get a couple of stickers ordered ill ask and see if i can get a small order at the prices i got them for made up and i'll see if i can bring it along to the next meet ..... You guys will have to let me know ... drop me a pm.

As for the soapy water ... dunno try that 1 at ur own risk .....

[iniff]

credit cards and stuff stretch the stickers out. they're not strong enough.

mine still has bubbles that don't seem to be going anywhere... I think i might have a dirt problem. If it lasts a session with the high pressure hose at the car wash then i'll just leave it otherwise I'll try replacing it with my second one...

[eggbert_99]

credit cards and stuff stretch the stickers out. they're not strong enough.

mine still has bubbles that don't seem to be going anywhere... I think i might have a dirt problem. If it lasts a session with the high pressure hose at the car wash then i'll just leave it otherwise I'll try replacing it with my second one...

get a really sharp sewing needle ..

pop the bubble and press it down ...

[blue_rolla]

so i was just talking to my sign making friend, and he says use water, a bit of soap (NOT HAND WASH - peferarbly like non-scented detergent), and a bit of metho to aid the drying process... apply the solution to the vehicle (spray works well) and then whack the sticker on over the top. get rid of the bubbles and leave it to dry... if there are bubbles after drying, then take eggbert's advice and pop them with a really sharp pin and flatten...

[iniff]

credit cards and stuff stretch the stickers out. they're not strong enough.

mine still has bubbles that don't seem to be going anywhere... I think i might have a dirt problem. If it lasts a session with the high pressure hose at the car wash then i'll just leave it otherwise I'll try replacing it with my second one...

get a really sharp sewing needle ..

pop the bubble and press it down ...

there's an idea! good thinking. I'll try it when i get home.

[eggbert_99]

credit cards and stuff stretch the stickers out. they're not strong enough.

mine still has bubbles that don't seem to be going anywhere... I think i might have a dirt problem. If it lasts a session with the high pressure hose at the car wash then i'll just leave it otherwise I'll try replacing it with my second one...

get a really sharp sewing needle ..

pop the bubble and press it down ...

there's an idea! good thinking. I'll try it when i get home.

the egg's always full of good ideas ... and yolk ... :D

[Romp]

credit cards and stuff stretch the stickers out. they're not strong enough.

mine still has bubbles that don't seem to be going anywhere... I think i might have a dirt problem. If it lasts a session with the high pressure hose at the car wash then i'll just leave it otherwise I'll try replacing it with my second one...

get a really sharp sewing needle ..

pop the bubble and press it down ...

there's an idea! good thinking. I'll try it when i get home.

the egg's always full of good ideas ... and yolk ... :D

Sorry guys

I just got my stickers from Bill and i see what you mean - i dont think the soapy water technique will work with these!

[CORZZA]

tom im still keen on the vynal hey bro! :)

[XploShun]

can u guys tell me.. is this large or medium...

i want this one.. :)

the one on top..... rear brake lights

wt colours can u get???

any?!

Edited April 11, 2006 by XploShun

[iniff]

can u guys tell me.. is this large or medium...

i want this one.. :)

the one on top..... rear brake lights

wt colours can u get???

any?!

that is medium

this is large:

EDIT: dammit, check the previous page for the large..

EDIT2: OH FINE NOW IT WORKS WHAT THE ****

Edited April 11, 2006 by iniff

[XploShun]

can u guys tell me.. is this large or medium...

i want this one.. :)

the one on top..... rear brake lights

wt colours can u get???

any?!

that is medium

this is large:

EDIT: dammit, check the previous page for the large..

EDIT2: OH FINE NOW IT WORKS WHAT THE ****

thx man

wts with the edit1 & 2

does it only come in white and silver??

[iniff]

can u guys tell me.. is this large or medium...

i want this one.. :)

the one on top..... rear brake lights

wt colours can u get???

any?!

that is medium

this is large:

EDIT: dammit, check the previous page for the large..

EDIT2: OH FINE NOW IT WORKS WHAT THE ****

thx man

wts with the edit1 & 2

does it only come in white and silver??

I think there was the option for any colour before. but everyone just chose white.

oh and dont worry about the edits. the forum was just giving me stick

[SyxXPaC]

Im up for 2 mediums