CME-LFT

Hi guys, just bought the whiteline rear sway bar and got it installed, plus i already had the whiteline front strut. Besides that the car (04 corolla sportivo) is stock suspension wise. Just curious, will a front sway bar make a big difference for road use? Im quite happy with the improvement the rear sway has made with less body roll around corners, now im wondering if i should buy the front sway?? Any tips or advice?

ye im from sydney... sounds good but do they do a good good much difference in power Well i havnt dynoed it but i could tell the diff in power as soon as it got installed. it didnt struggle as much pulling up hill and with a passenger either. And when the lift kicks in ............. :D

yeh, i still dont understand what to do, i checked behide the motor just from looking into my bonnet and i saw a metal shield (hopefully thats the one that were talking about), are we ment to bend it up or ....???

Dude if ur in sydney go to liverpool exhaust, the guy owns 2 stivos and i got mine from there, i could not be more happy.Mad sound and looks pretty good. Professional job, from what i can remember its 280 for the cai, or 350 installed.

yeah, it could be mistaken for a rav.lmao it would be lowered by now but i cant save, instead of saving to $1000 or wateva to get springs. ill reach $200 and think what can i buy for it RIGHT NOW.lol

Deff street car with a bit of poke, im trying to get it classy yet sporty without being over the top. U know, u get looks but not attract police attention sorta thing. Yeh, forgot to add brake calipers to the list, will do now.lol

Hi guys, been on the forum a little while now, just thought id show you what ive done to my car with the help of this forum. The ideas are endless. Atm its got 17inch lenso apex 5 (i think, i got them with the car) whiteline front strut eyelids Liverpool exhaust CAI Red console mod Painted engine cover(rice factor) Red wipe blades (rice factor again.lol) Sound System (well, bass anyway atm.) Soon to go in Whiteline rear sway bar Future plans Springs and shocks (king lows) Rear brake light mod Cat back Headers Red Calipers

Ey guys, thanks for all your info. Ummm.... in regards to stopping the cables from hitting the heat shield, is it something i can see/do by just looking under the car or into the bonnet? I roughly remember reading something about using cable ties??? Whats the heat shield look like, is it near the headers or hidden away somewhere in the back where its a pain in the butt. :S My warranty has run out. If anyone could please take photos or point me towards the right topic i would trully apreciate it. Thank you

Lmao. thanks, thats puts my mind to ease :D

PUKE......................:S

Soz guys, just realised cant come, missus family plans on sat nite. see u in august. :(

Hi guys, ive had my 04 stivo since the begining of this year. anwyay it makes a few weird noises, one which i think is the gear selector cables which i learnt after browsing this forum. It sounds like rattling from under the car and cames and goes. If it is that, i have come to learn that there is no real solution for this...true? 2nd is, my gf keeps saying my car sounds like a diesel motor cause when its at low revs it makes (like take off at too low a rev, not to the point where its goings to stall but at about 1500-2000k).....well.....diesel sounding noise. Do all stivos sorta sound like this? Had this since i got it and all was stock. The car has perfect service records every 10thous and the was in perfect nick when i got it. Theres nothing wrong with it, and it runs fine, but my missus is starting to bug me.lol Any ideas or thoughts?

I should be there again. Hopefully a few little extra mods this time :D Ey xoom my mate wants to come round with his early model corolla seca (1989 or whatever it is) but its got a 20v in it, its all cool yeh? he can meet flynsx if he rocks up as well:D

Thanks for clearing that up. Btw whats PCD stand for and how would i find out the (PCD) of the rim without physically swapping it over?

They are some 18inch lenso multistud. I still dont fully understand offset but the rim it close to the outer rubber edge of the wheel. Its not deep dish or anything. From what you have explained, are you saying the multi fit rims can fit different 4 stud car with different spacing? or are multi fit rim just for either 4 or 5 stud and come with preset spacings for different cars? Hopefully i made sense

Hi guys, just curious if anyone knows if a r33 nissan skyline (non turbo so its 4 stud) rims will fit on an 04 corolla sportivo. cause my mates got 18s on his skyline and i was wondering if the stud spacing was the same and they might fit? Any thoughts?

Why was he so psd off in the first place?? that he wanted to hit that specific car?, i would just run the bloke over.

So pretty much, im going to have to put a splitter box at the back. :( Ah well. thanks anyway guys. Looks like ill go and upgrade the power wire again, seeing as the mono has 3x30 amp fuses and the 2channel has 1x 30 amp fuse (total 120 amps) and the 4 guage i have atm only handles 110 amps, plus the fact that if i brought that through to a splitter box, i have to then split each amplifier into 8 guage which is rated even less. Does this sound right so far or wont the amps really reach their max current draw and im just being paranoid? The manual for the big mono block recommends to use 4 guage for it alone.

I know thats the most obvious and probly the easiest option, its just i dont want too much junk(splitter boxs, and fuses) all screwed into the back seat. Just another thought which i didnt think about, where am i going to screw the ground if i install the amp under the seat?

High guys, i got my first amp installed at an audio shop and they ran 4awg through the firewall in an empty hole/grommit, now i wanted to put a 2nd amp in under the passenger seat but theres no more holes left ( or i cant see them at least) Any ideas? As i dont feel like splicing a new line from the 1st amps supply in the boot and running back, i was curious as if anyone has any ideas/method or if they ended up puttin the 2nd amp in the back?? Maybe i could drill a small hole in the firewall............. ............................... .................

Welcome mate! One thing you'll learn after being a member on this site for a while, you corolla wont stay the same way you bought it, the forum has a funny way of making you want to mod your car :D

Fun nite last night, great shots,nice to meet you all, hopefully see you next month! :D

How ya going mate. I got my HU installed in the top din due to me having to flip the screen down to take it out, if it was at the bottom it probly would end up hitting the centre console part area. (plus it looks neater at the top, my thoughts anyway) To keep it hidden and a little neater, instead of bringing it out through the din space underneath, get one of those usb 2.0 extention leads(about $10 at dik smith), join onto the HU usb and bring it out through the glove box, thats what i did anyway. Heaps of places do it, look up you nearest autobahn, strathfield car radios theres bound to be a place near you. Usually its about $60 for a HU swap over + the toyota spacers on the side and the bottom din space holder peice.

Man i was scrolling through the post, getting all excited how good the car looks until i saw the smashed pics..........i was about to cry, anyway good luck man, hope it works out for the best!

Sweet, i should be there, first time too.........(im still a group meet virgin.lol) Hopefully my eyelids will arrive before saturday.lol