Jump to content

Console light

Cooley

By Cooley
in Audio/Video/Electronics

 Share

Recommended Posts
Tivo Matt Proficient

Tivo Matt

Posted
Posted
Hi fellow members,

I saw this from the gallery:

http://www.toyotaownersclub.com/gallery/au/0407075_G

http://www.toyotaownersclub.com/gallery/au/Cc

Does anyone know how to change the bulb under the console?  How to open the console???

http://www.2003corolla.org/diy.php?diy=18

There is something to get you started. I'm sure there are plenty of people on here who have done it... so they will prolly chip in at some point.

Cooley Experienced

Cooley

Posted
  • Author
Posted

the instruction in that web site...only shows pics about the corolla without the climate control.

What about our stivos with climate control?? I couldn't even find a screw or anything that looks like that can be opened :(

Anyone?? Please give some advice


rollagrl Mentor

rollagrl

Posted
Posted

once u have the climate control out there are about 6 screws and it also clips in but be careful cos there is a ribbon cable there that comes out easily, then u should be able 2 see the things 4 the bulbs... hope that makes sense

Cooley Experienced

Cooley

Posted
  • Author
Posted
once u have the climate control out there are about 6 screws and it also clips in but be careful cos there is a ribbon cable there that comes out easily, then u should be able 2 see the things 4 the bulbs... hope that makes sense

Sorry, I couldn't even get the climate control out.. :(

Can you describe from the very begining of the process?? :o

rollagrl Mentor

rollagrl

Posted
Posted

ok y take out the surround 4 ur stereo, once theat is out go 2 the mouldind around ur gear knob put ur fingers under it were it meets the cup holder, like get ur fingers underneath it and gently pull it up it should unclip. now go 2 the top of the climate control and gently pull it 2wards u the top should unclip when it does move ur hand down 2 unclip the middle/bottom clips. wwhen its un cliped genlty un plug the 3 (i think) plugs at the back and whoala!

hope that made sense, once uve done it a few times..... as i have its a piece of cake! :rolleyes:

hope thats helps

yekim Community Regular

yekim

Posted
Posted
ok y take out the surround 4 ur stereo, once theat is out go 2 the mouldind around ur gear knob put ur fingers under it were it meets the cup holder, like get ur fingers underneath it and gently pull it up it should unclip. now go 2 the top of the climate control and gently pull it 2wards u the top should unclip when it does move ur hand down 2 unclip the middle/bottom clips. wwhen its un cliped genlty un plug the 3 (i think) plugs at the back and whoala!

y do you need to take out the stereo surround for the centre console?

anyway, everything comes out from the shifter upwards, each part (the shifter’s surrounds and centre console) should click out by simply prying it with a screwdriver (gently) just make sure you do all four corners a little bit at a time, otherwise one of the clips might snap.

peekay Grand Master

peekay

Posted
Posted

You do not need to use a screw driver in any shape or form :o . Except to remove the screws at the back of the console.

Process is

1) Remove surround around the gear lever after removing the knob

2) Removed the Ashtray

3) Remove the vent surround by pushing in the lower part of the vents. Grip either side and pull straight out..

4) Once the vent surround is removed put the gear knob back on (to prevent damage to the centre console).

5) Once these are removed pull the lower part on the centre console gently towards you (Held by two clips (no screws hold the console in)

5) Pull the top of the console towards you (agan helpd by two expanding clips)

6) There are 3 sets of plus remove these (they are all keyed so you do not need to worry about recording the details)

7) Remove the Ashtry bulb at the back of the console

And the console should be out. Be carefull not to brake the clips.

Remove the Six screws at the back of the console (lay the console on a towel or something soft to stop scratching)

Lever the top of the black rear assembly out gently. When you pull the cover off be careful as it has a ribbon cable which can be damaged easily.

There are are a Total of 5 lights that would require replacement with Leds and 3 Condoms of your colour choice. LEDs Are prely directional so you cannot replace the Aircon and Clock units with LED (they do not disperse light in all directions). Also LEDS are polarity sensitive so you must get them around the right way once installed.

My advise is if you have no idea get some one to do it who knows how to or has done it before because you can cause damage if you were in Melb I could help but.....

Cooley Experienced

Cooley

Posted
  • Author
Posted

There are are a Total of 5 lights that would require replacement with Leds and 3 Condoms of your colour choice. LEDs Are prely directional so you cannot replace the Aircon and Clock units with LED (they do not disperse light in all directions). Also LEDS are polarity sensitive so you must get them around the right way once installed.

My advise is if you have no idea get some one to do it who knows how to or has done it before because you can cause damage if you were in Melb I could help but.....

I'm sure about getting LEDs and I got no idea about the resistors.

Can I just buy those "condoms" instead? What's the difference between them??

rollagrl Mentor

rollagrl

Posted
Posted

most of the globes have rubber things over them that like like condoms anyways go 2 autobarn or somewhere like that and they should have them, i could only get 5mm 1s and they were 2 big 4 some of the bulbs so i just put em over the greens 1s, looks ok

yekim Community Regular

yekim

Posted
Posted

There are are a Total of 5 lights that would require replacement with Leds and 3 Condoms of your colour choice. LEDs Are prely directional so you cannot replace the Aircon and Clock units with LED (they do not disperse light in all directions). Also LEDS are polarity sensitive so you must get them around the right way once installed.

My advise is if you have no idea get some one to do it who knows how to or has done it before because you can cause damage if you were in Melb I could help but.....

I'm sure about getting LEDs and I got no idea about the resistors.

Can I just buy those "condoms" instead? What's the difference between them??

if you want to put leds on, all you need is a multimeter and ohms law (V=IR)

the voltages around the console very by a few volts. you should vary the resistor values so that each led runs with the same current and hence have a similar intensity.

I've got all my centre console and head unit changed to red leds...the climate control and clock backlights need a bit of tweaking and wide angle leds to get the backlight consistant. The head unit is a different story...

if your unsure about leds, then just go with the condoms, however, i do recall some people mentioning some fading...?

Another alternative is to simple colour the condomless bulbs the colour you wish, may fade over time tho...

Cooley Experienced

Cooley

Posted
  • Author
Posted

Yeah, I've got my red central console done ~!! :D

It looks cool ~!! :D

Thanks everyone who had given a piece of advice or even comments....Thanks heaps...

Otherwise, I'm really sure I couldn't get it done. :lol:

P’¢¡šT Collaborator

P’¢¡šT

Posted
Posted (edited)
Yeah, I've got my red central console done ~!! :D

It looks cool ~!! :D

Thanks everyone who had given a piece of advice or even  comments....Thanks heaps...

Otherwise, I'm really sure I couldn't get it done.  :lol:

Did you use red covers for the bulbs? Does it come out dull or as per the stock green brightness?

Edited by P’¢¡šT
peekay Grand Master

peekay

Posted
Posted

If you know nothing about electronics....and want to convert you dash to LED's..I suggest you go to Autobarn they sell premade 2.5 mm units. They are are made to be used as wedge bulbs but can be modified to fit the stivo setup ..I used these on my Stivo, ILIVFOR6 and Danthuyers car. They come premade with the resistor already attached. It is a more expensive option but at least they provided piece of mind that they are correct The condoms are fine as far as brightness I used red except for Danthuyers car which was blue...Blue is darker tho...

Also do not forget they are directional polarity wise, meaning + must go to the + rail in the dash or they won't work.

P’¢¡šT Collaborator

P’¢¡šT

Posted
Posted
If you know nothing about electronics....and want to convert you dash to LED's..I suggest you go to Autobarn they sell premade 2.5 mm units. They are are made to be used as wedge bulbs but can be modified to fit the stivo setup ..

Can you explain how they need to be 'modified'?

Danthuyer Grand Master

Danthuyer

Posted
Posted
Can you explain how they need to be 'modified'?

they are exactly the same as the units which are on the display from the factory.

so you simply unscrew the original ones. then screw in the new ones.

simple easy and quite impressive :D

DeathZone Collaborator

DeathZone

Posted
Posted

I used Tamiya model paint on the lights..... Clear red and it looks great.... I love it. Should have been like this from the factory.

The centre console is very very easy to remove.... You should have no problems. Took me about 10mins all up including painting the lights.

Peter.

  • 3 months later...
melvinlau Experienced

melvinlau

Posted
Posted

wow i didn't discover this thread till just then, i've been waiting for ages to do this, thanks guys...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    2. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    3. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    4. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    5. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    6. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    7. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    8. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    9. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    10. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
×
×
  • Create New...

Forums

News

Membership