Jump to content


$exy Aurion backside

apg39

By apg39
in Aurion / TRD Aurion Club

 Share

Recommended Posts

apg39 Veteran

apg39

Posted
Posted (edited)

Got bored this morning....did a little photoshop on an Aurion bum.

Note: tinted tailights, debadged, Custom TRD/Toyota badge, quad exhaust & lower bumper reflectors removed.

My plans - all of the above! Already debadged, working in the Custom badge, searching for quad exhaust (small cut out on the rear bar so has to be small tips), tint for tail lights will come. Reflectors wont happen.

No stealing my ideas!

aurionbumchopped.jpg

Edited by apg39
VF-X Grand Master

VF-X

Posted
Posted (edited)
Got bored this morning....did a little photoshop on an Aurion bum.

Note: tinted tailights, debadged, Custom TRD/Toyota badge, quad exhaust & lower bumper reflectors removed.

My plans - all of the above! Already debadged, working in the Custom badge, searching for quad exhaust (small cut out on the rear bar so has to be small tips), tint for tail lights will come. Reflectors wont happen.

No stealing my ideas!

aurionbumchopped.jpg

Apart from having the Quad Exhaust, There's nothin we're similar in our interest..

The fact u uploaded this means 'Some1 PLZ steal my idea'. :P

I reckon the quad should not be too small..If it doesnt fit, that means u just need to cut till there's a space.. :D

Man...U're pretty good @ photoshop, You should do us some favor sometime when u're free.. Sharing the ideas..:P

Edited by VF-X
apg39 Veteran

apg39

Posted
  • Author
Posted
Apart from having the Quad Exhaust, There's nothin we're similar in our interest..

The fact u uploaded this means 'Some1 PLZ steal my idea'. :P

I reckon the quad should not be too small..If it doesnt fit, that means u just need to cut till there's a space.. :D

Man...U're pretty good @ photoshop, You should do us some favor sometime when u're free.. Sharing the ideas..:P

I know how to do a few things on PS, If I can help I will. PM me if you want

Lol - Tinting tail lights, debadging & exhaust arent exactly things I can copyright, I dont care if anyone copies...just don't do it before I do :D

The custom badge though - Ill see how it goes then I might make a DIY for it. At the moment it seems like alot of work. Anyone know if theres a place to get badges made up??

Quad exhaust, from looking I think there's 5-6 inches so 2x 2" tips might be ok, I just dont want it too close that it melts the bumper....

DJKOR Grand Master

DJKOR

Posted
Posted
... I just dont want it too close that it melts the bumper....

Mine has a factory defect where one exhaust isn't sitting perfectly in the centre. One side is actually touching a bit of the bumper. No problems there. But then again the stock tips probably don't get hot on the outside due to the crappy design.

I'm thinking of getting the Varex dual tip and enlarging the space to make the tips fit.

varexth5.th.jpg


mrdau Community Regular

mrdau

Posted
Posted
Got bored this morning....did a little photoshop on an Aurion bum.

Note: tinted tailights, debadged, Custom TRD/Toyota badge, quad exhaust & lower bumper reflectors removed.

My plans - all of the above! Already debadged, working in the Custom badge, searching for quad exhaust (small cut out on the rear bar so has to be small tips), tint for tail lights will come. Reflectors wont happen.

No stealing my ideas!

aurionbumchopped.jpg

Apart from having the Quad Exhaust, There's nothin we're similar in our interest..

The fact u uploaded this means 'Some1 PLZ steal my idea'. :P

I reckon the quad should not be too small..If it doesnt fit, that means u just need to cut till there's a space.. :D

Man...U're pretty good @ photoshop, You should do us some favor sometime when u're free.. Sharing the ideas..:P

Agreed I think everything on the ***** is perfect.. But a quad exhaust would look nice

apg39 Veteran

apg39

Posted
  • Author
Posted (edited)
... I just dont want it too close that it melts the bumper....

Mine has a factory defect where one exhaust isn't sitting perfectly in the centre. One side is actually touching a bit of the bumper. No problems there. But then again the stock tips probably don't get hot on the outside due to the crappy design.

I'm thinking of getting the Varex dual tip and enlarging the space to make the tips fit.

But the stock tips also have the inner piece then the shiny chrome oval outside, so heat might not transfer as much to that outer piece.

Is that the 3" tip Varex? I had the normal muffler but same size on the Forester...its heaps bigger than you think. I think the cut out on the Foz is a similar size to that of the Aurion.

P1010579small.jpg

Edited by apg39
VF-X Grand Master

VF-X

Posted
Posted (edited)

Has some1 actually done this mod?

And for the tinted tail lights...Would it actually be nice just on white or including Black?

What about the front? Cant see the picture of all of these combined together...Which is why we need a pro PhotoShop-Guy... :P

Edited by VF-X
apg39 Veteran

apg39

Posted
  • Author
Posted
Has some1 actually done this mod?

And for the tinted tail lights...Would it actually be nice just on white or including Black?

What about the front? Cant see the picture of all of these combined together...Which is why we need a pro PhotoShop-Guy... :P

Tinted tail lights look good on most cars, send me a picture of the rear of yours & Ill have a go at it. Tints make it look :ph34r:

Ive painted my headlight surrounds black, there's a DIY thread floating around, but look at my signature pic too.

dannywss Grand Master

dannywss

Posted
Posted

DJKOR: if the dual oval varex fits, i will oledi get them.. sadly....... <_<

yea, i thought if u upload and showing to public and no copyright... lolz.. anyone can get it done..

VF-X Grand Master

VF-X

Posted
Posted
DJKOR: if the dual oval varex fits, i will oledi get them.. sadly....... <_<

yea, i thought if u upload and showing to public and no copyright... lolz.. anyone can get it done..

Cant anything be done to fit em? Cut through and make space for it?

DJKOR Grand Master

DJKOR

Posted
Posted
DJKOR: if the dual oval varex fits, i will oledi get them.. sadly....... <_<

yea, i thought if u upload and showing to public and no copyright... lolz.. anyone can get it done..

Cant anything be done to fit em? Cut through and make space for it?

Bit of a bummer. They didn't look so large in the pic. I guess if one was really eager, you could make it fit. I'm to pov and too lazy to cut the bumper, so I guess I can rule those out. Well I guess the single tip version would fit then right?

apg39 Veteran

apg39

Posted
  • Author
Posted
Well I guess the single tip version would fit then right?

Yeah you can choose 4" or 4.5" tips which should slot in fine.

For those that have a Varex - did you have to change the diff back piping as well? Cos the stock mufflers input/outputs are off centre & the Varex's are centre/centre?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership