Jump to content

205/55/16 do they fit on sportivo rims?

lazyboy

By lazyboy
in Wheels & Tyres

 Share

Recommended Posts

lazyboy Enthusiast

lazyboy

Posted
Posted

hi guys,

i'm due for new tyre's soon and the 195/55/16 seem abit high and not much to choose from.205 seems to be more cheaper and more brands out there!

just wondering if they fit

thanks

oz_viking Grand Master

oz_viking

Posted
Posted

The 205's will put your overall diameter out by 8mm. The best bet is to shoehorn on a set of 215/50 R16's - only 0.5mm difference in diameter and therefore won't cause speedo inaccuracy.

kcorro Grand Master

kcorro

Posted
Posted
The 205's will put your overall diameter out by 8mm.  The best bet is to shoehorn on a set of 215/50 R16's - only 0.5mm difference in diameter and therefore won't cause speedo inaccuracy.

but the factory wheel is only 6 inches wide and if you believe in the rule that the wheel can only support 6 + 2 = 8 inches

8 inches into metric is 203.2 mm

so even running 205 is pushing it


lazyboy Enthusiast

lazyboy

Posted
  • Author
Posted

so you guys saying 205/55/16 will fit on sprotivo rims but how ever 205/50/16 will be best for performance?

i think 215 will be pushing it

thanks

rolla02 Experienced

rolla02

Posted
Posted (edited)
The 205's will put your overall diameter out by 8mm.  The best bet is to shoehorn on a set of 215/50 R16's - only 0.5mm difference in diameter and therefore won't cause speedo inaccuracy.

You're right, 205/50/16 is 8mm less diameter,which is only 1.5% different to stock.

So when you're speedo says 100km/h you're really doing 98.5km/h which probably ain't a bad thing if you live in Victoria.

Check out this site

Tire Size Calculator

Cheers

T.

Edited by rolla02
h4tch3t m4n Enthusiast

h4tch3t m4n

Posted
Posted

Lo,

Just managed to see this looking for some advice...

I have 205/55/16 on my stock stivo rims.

Grip is slightly better, road noise is less, and my speedo is out slightly.

Road holding is slighlty off from the origional tyre size though, as I now have a waggy tail when braking extremely hard, and the car rolls more when I corner hard.

Pull aways are also slightly slower.

It depends on what you'll be using your car for I guess...

For family trips and long road I would happily suggest these, but for a track day every now and then, or some "spirited" city driving I would suggest the standard size or the 205/50's.

Lata.

lazyboy Enthusiast

lazyboy

Posted
  • Author
Posted
Lo,

Just managed to see this looking for some advice...

I have 205/55/16 on my stock stivo rims.

Grip is slightly better, road noise is less, and my speedo is out slightly.

Road holding is slighlty off from the origional tyre size though, as I now have a waggy tail when braking extremely hard, and the car rolls more when I corner hard.

Pull aways are also slightly slower.

It depends on what you'll be using your car for I guess...

For family trips and long road I would happily suggest these, but for a track day every now and then, or some "spirited" city driving I would suggest the standard size or the 205/50's.

Lata.

lata,

thanks heaps for that info!

what brand tyres you have?

yeah my rolla is only for run around and maybe just a race of the lights but thats about it, no flying around corners etc...so that makes my choice alot more easy.

loi.

h4tch3t m4n Enthusiast

h4tch3t m4n

Posted
Posted

Lo,

They are dunlop SP7000's, the ones that apprently broke the ladnspeed record...

Dunno if you'll be able to get them over there though...???

They didn't do much for my engine output... :D :D :D

Anyways, they're failry soft but last long, a mate of mine has done 42000K's, and they still have some good life in them.

Lata.

  • 2 weeks later...
Buddha Grand Master

Buddha

Posted
Posted

It really can depend on what type of tyre you're talking about.

I've been researching replacements for my 195/60R15's (Conquest has 15x6 rims) and both Bridgestone and Yokohama are happy for their 225/50R15's to go on those rims, but that's the minimum width they'll cope with. In both cases they specify a suitable range of 6 to 8" rims, with 7" being the optimum.

Having said that, though, you might find other brands or types of tyres where their 225 widths are not suitable for 6" rims.

As much as I'd love a set of these for my car, I suspect they may scrub a bit. Personally, I'll be heading for 205/55R15's when the time comes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership