Jump to content


Stud Pattern

safekraka

By safekraka
in Aurion / TRD Aurion Club

 Share

Recommended Posts

safekraka Enthusiast

safekraka

Posted
Posted

Hey guys

Please please please help

I have just put a bid on some rims on eBay that are from an Aurion and have realized i am not sure if they will fit my JZX90 ( yeah stupid i know)

If you could tell me the stud pattern that would be great.

thanks guys

Dave

rodspringer Community Regular

rodspringer

Posted
Posted

Cool mate what offset?

Am looking for 17s for my 90 so I can fit Supra calipers

Getting ****ty with noisy race pads


apg39 Veteran

apg39

Posted
Posted

Stock Sportivo 17" rims are +42 offset I think?

DJKOR Grand Master

DJKOR

Posted
Posted
Stock Sportivo 17" rims are +42 offset I think?

I was always under the impression that they were a +35mm offset. I know the Gen 5 Camry's were +42mm offset, but I don't know if the Aurion has the same. An interesting note, the Kappa rims which are an option for the Aurion come in +45mm offset. Hmmm.

Just looking at the wheel though, a +45mm offset seems more correct though. I guess I'll take out the tape measure next time I remove my rims.

David the Viking Veteran

David the Viking

Posted
Posted

All Aurion's and gen6 Camry's should be +45mm except the TRD which is +46.5mm.

I have some Presara wheels at home for my wifes gen6 and they are 17x7 +45mm.

Wulfkind Experienced

Wulfkind

Posted
Posted
All Aurion's and gen6 Camry's should be +45mm except the TRD which is +46.5mm.

I have some Presara wheels at home for my wifes gen6 and they are 17x7 +45mm.

Whats the going rate on the 17" Sportivo rims these days anyhow? I've got a full set sitting in the shed that I should probably offload at some point.

DJKOR Grand Master

DJKOR

Posted
Posted
Whats the going rate on the 17" Sportivo rims these days anyhow? I've got a full set sitting in the shed that I should probably offload at some point.

There is currently a set on eBay for $400 without tires. I've seen a set on there before with tires with a starting bid of $500 and I don't think those sold. They don't seem so popular.

Wulfkind Experienced

Wulfkind

Posted
Posted
Whats the going rate on the 17" Sportivo rims these days anyhow? I've got a full set sitting in the shed that I should probably offload at some point.

There is currently a set on eBay for $400 without tires. I've seen a set on there before with tires with a starting bid of $500 and I don't think those sold. They don't seem so popular.

Figured as much, think I'll just keep the set I got to swap out for rego if its ever needed.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    2. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    3. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    4. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    5. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    6. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    7. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    8. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    9. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
×
×
  • Create New...

Forums

News

Membership