Jump to content

How to take off rear parcel shelf

Silver-Aurion

By Silver-Aurion
in Aurion / TRD Aurion Club

 Share

Recommended Posts

Silver-Aurion Grand Master

Silver-Aurion

Posted
Posted

I've installed my sub and amp but I'm getting terrible rattle from my parcel shelf. I tried different way to try and take it out put it's like it's cemented down. I have no clue how to remove it. I searched here but can't find anything. Can anyone lead me to the right path? Thankss!


Stretchy302 Enthusiast

Stretchy302

Posted
Posted

I would like to take mine off and add a weight to it somehow..

I've noticed that throwing my wallet on it on long road trips will shut it up.

DJKOR Grand Master

DJKOR

Posted
Posted

The clips on it are fairly solid and it does require a little force, however.....

..... have you removed the light grey C-Pillar covers (the ones on either side of the parcel shelf) firstly?

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

The clips on it are fairly solid and it does require a little force, however.....

..... have you removed the light grey C-Pillar covers (the ones on either side of the parcel shelf) firstly?

No I have not. Is that where I should start? Do I have to be careful of airbag or anything?


GShadow Enthusiast

GShadow

Posted
Posted

The clips on it are fairly solid and it does require a little force, however.....

..... have you removed the light grey C-Pillar covers (the ones on either side of the parcel shelf) firstly?

Any info on removing parcel shelf would be great as I also will be replacing speakers at some stage. Thanks

DJKOR Grand Master

DJKOR

Posted
Posted

If you want full instructions, refer to the service manuals in the FAQ's. Otherwise, removal is as simple as removing the side trim (it won't affect the airbags) then you lift up te parcel shelf. There's nothing too it.

Removing the rear headrests can also help you out.

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

If you want full instructions, refer to the service manuals in the FAQ's. Otherwise, removal is as simple as removing the side trim (it won't affect the airbags) then you lift up te parcel shelf. There's nothing too it.

Removing the rear headrests can also help you out.

Thanks mate, I can vouch for this advice. When I went to remove my parcel shelf I tried your suggestion by removing those side trims and then it was as easy as pulling up on the parcel shelf with all your strength.

Foss Grand Master

Foss

Posted
Posted

So this can be done without removing the seat back? Hmmm. Its been a while since I've done it, and I already had my seats out at the time for other stuff, so I've never bothered to try it with the seat in place.

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

So this can be done without removing the seat back? Hmmm.

Sure can. Just remove those side bits first and pull up (with some force) to unclip the parcel shelf.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership