johnnieboi

very nice! finally a modded Rukus. you've just won a new Rukus crowd

nice facelift mate

I use Penrite HPR5 5W-40 atm. Might change to Castrol Edge 5W-30 next service though

one of the sexiest stivos out there :)

I know my zre handling improved vastly over stock when i had my King Springs Low installed. With the TRD suspension kit though you get; - Lowered Springs (sit quite level compared to other springs, rear not high) - KYB Shock absorbers (stiffer ride) - Front Sway (helps front end corner much better) thats if you get it all anyway. hope that helps

time for some aggressive wheels!

nice info there dutchie!

WTF!? You got a V8 under your hood or something? Mine average went up i think. From 7.5-7.6 to 7.9-8/8.1. i've lost some km's there. but not too much.

was 1.1k full comp.. but i had a small incident a while back.. now 1.7k - pain <_<

If you got the Levin ZR i believe its not wise to have seat covers. Blocks the use of your drivers seat airbag. But then in saying that, i have seatcovers too, doing my job would destroy my seats without them

hope your ready for a big hole in ur pocket. but the good thing is, with TRD products = high quality built items. and compared the trd springs to my king springs low, the trd springs sit more even. probli the most even out of all the spring setups i've seen anyway. goodluck with whatever you do

hrmmmm.. yes i like misa campo very much

white rims suit nicely. very clean and tidy

Now now, theres no need to start being like that. People are offering help and their opinions, isnt that what you stated in the topic? Your Opinions on this look? And you got it. Whether positive or negative, or how raw it is you've got to accept other peoples opinions/ideas. Not everyone will like your ideas/looks which is fine, do things the way you want to do it. Your car is an extension of your own persona. What other people say shouldnt affect what you think or want to do. Sooking isnt going to get you anywhere whatsoever and saying you'll debadge your TOCAU sticker and stop modding is not the intention of the Forum or its members. Theres no need to be like that.

yes. just undo the middle screws and pull it out

AutoSalon Magazine Readers Design Entry winner; modify a facelift corolla.

lowered springs 1. you get the 'lowered' look 2. vast improvement in handling over stock cant go wrong. easily one of the first and not so expensive mods to do.

Dont know bout that last red circle one. but if its the same as the 08 model. then there are 5 or 6 bolts i believe along the edge of the front bumper.. i think 10mm socket ratchet will do it. undo those. take all the pop in screws from the panels up top. those side screw things near the wheel arches arent really screws, just use a small flathead screwdriver and jibby it out. i have those weird ones and a flathead one on each side. and if your Levin ZR model, then you'll have a water reservoir on the left hand side of the bumper to disconnect. Either plug it somehow or empty it completely and fill up reservoir later. need to disconnect the hose before taking bumper off. the black clip/adaptor thing that connects to the reservoir is quite the b#tch to get out and put in. Then pull out bumper from each side first to loosen it.. then the whole front should lift out. :)

Rag + flathead screwdriver. Gently jib it while you try to pull it out. Should come out with a click. Same for netz badge.. click in slowly.. top or bottom in first, check first. Dun worry i almost broke my netz badge putting it in.

we normally meet up at sunshine plaza carpark and go from there.. either wash.. eat something.. maybe a run. pm one of us ur number and we'll msg you for future meets. ;) your like seriously 5mins away from me and kenshinx

lol. thats pretty tight.. cos she was hot :)

neat and tidy.. nice banner btw tomee.. where was our invites to it?

One word; JDM

nice man! icy blue hue all out

:( <_<