Jump to content

Installing A CAI

HIROLA
 Share

Recommended Posts

HIROLA Proficient

HIROLA

Posted
Posted

Hey guys

can anyone out there help me i just bought a CAI and need some direction in installing. Thanks in advance.
Sport1vo Grand Master

Sport1vo

Posted
Posted (edited)

<POST REMOVED>

Edited by sport1vo
HIROLA Proficient

HIROLA

Posted
  • Author
Posted

thanks for the help Sport1vo but the CAI i bought was not TRD but Simota. So if anyone out there has installed a Simota CAi i would greatly appreciate any advice

Sport1vo Grand Master

Sport1vo

Posted
Posted (edited)

<POST REMOVED>

Edited by sport1vo

BlackRolla Mentor

BlackRolla

Posted
Posted

I just installed the Simota CAI the other week. Just follow the same steps as the TRD one. It's exactly the same. Just remeber to reset the ECU. I found that resetting the ECU should be done when the engine is cold. So when u let the car idle it starts from cold to warm and therefore will adjust accordingly. I had a few problems with hestitation when accelerating but when I resetted the ECU when engine was cold it was all good.

Good luck mate

sogoe Enthusiast

sogoe

Posted
Posted
I just installed the Simota CAI the other week. Just follow the same steps as the TRD one. It's exactly the same. Just remeber to reset the ECU. I found that resetting the ECU should be done when the engine is cold. So when u let the car idle it starts from cold to warm and therefore will adjust accordingly. I had a few problems with hestitation when accelerating but when I resetted the ECU when engine was cold it was all good.

Good luck mate

Sorry if this question is silly, but i really dont know how to reset ECU?? could any buddy help me?

Northy Grand Master

Northy

Posted
Posted

1) disconnet the battery for 30mins+

2) reconnect the battery and let the car idle for 5-10mins (make sure all the acessories are OFF)

3) turn the car off and disconnect the battery for ~30sec

4) reconnect the battery, start the car and drive the rings off it.

sogoe Enthusiast

sogoe

Posted
Posted
1) disconnet the battery for 30mins+

2) reconnect the battery and let the car idle for 5-10mins (make sure all the acessories are OFF)

3) turn the car off and disconnect the battery for ~30sec

4) reconnect the battery, start the car and drive the rings off it.

Thanks a lot Northy!!!!! It really helped!!!!

BTW, apart from installing CAI, what other situations i should reset ECU??

Northy Grand Master

Northy

Posted
Posted
1) disconnet the battery for 30mins+

2) reconnect the battery and let the car idle for 5-10mins (make sure all the acessories are OFF)

3) turn the car off and disconnect the battery for ~30sec

4) reconnect the battery, start the car and drive the rings off it.

Thanks a lot Northy!!!!! It really helped!!!!

BTW, apart from installing CAI, what other situations i should reset ECU??

the last part of step 4 is the MOST important, um if you change the pod filter you should reset the ECU appart from nothing comes to mind

HIROLA Proficient

HIROLA

Posted
  • Author
Posted

this mite be a stupid question but can anyone post the TRD CAI manual? i have no idea where to begin :blink:

oz_viking Grand Master

oz_viking

Posted
Posted

Can anyone explain the suggested and seemingly arcane ECU resetting procedure?

I have changed several times from the stock airbox to my CAI - WITHOUT disconnecting the battery and thus the ECU has not been reset. The ECU is always learning, so all resetting will do is maybe speed up the process of adapting to increased airflow (and therefore increase fuel delivery) with a CAI installed. But leaving it alone will eventually do the same thing...

As for disconnecting for 30 mins, then idling until warm, then disconnecting again for 30-60 seconds, then driving the tits off your car - that just sounds silly. The second disconnection will just reset the ECU again so why bother?

Why not just use Voodoo - it seems to have just as much validity and basis in reality as the above crazy procedure.

mx83toy Proficient

mx83toy

Posted
Posted (edited)

i've heard of others a step 1.5 should be included (press the brakes for a few seconds) apparently leaks out any energy stored the the cars electricals... where did you get the simotoa CAI how much was it???

Edited by mx83toy
HIROLA Proficient

HIROLA

Posted
  • Author
Posted

Finally installed the CAI :D

I got the CAI from Shift Performance in Lansvale on the Hume highway it was $210

HIROLA Proficient

HIROLA

Posted
  • Author
Posted

I just took the rolla for a spin after installing the cai and resetiing the ecu and could not believe the difference :D its like driving a different car. One question though did any one else get a knocking sound when starting the car with the cai? on mine seems to do it every time, i think it could be the cai drawing in air on ignition? anyone else have any other theories as what it could be?

lazyboy Enthusiast

lazyboy

Posted
Posted
HIROLA-Finally installed the CAI 

I got the CAI from Shift Performance in Lansvale on the Hume highway it was $210

what brand airfilter do you get with is CAI???

thanks

Northy Grand Master

Northy

Posted
Posted
Can anyone explain the suggested and seemingly arcane ECU resetting procedure?

I have changed several times from the stock airbox to my CAI - WITHOUT disconnecting the battery and thus the ECU has not been reset.  The ECU is always learning, so all resetting will do is maybe speed up the process of adapting to increased airflow (and therefore increase fuel delivery) with a CAI installed.  But leaving it alone will eventually do the same thing...

As for disconnecting for 30 mins, then idling until warm, then disconnecting again for 30-60 seconds, then driving the tits off your car - that just sounds silly.  The second disconnection will just reset the ECU again so why bother?

Why not just use Voodoo - it seems to have just as much validity and basis in reality as the above crazy procedure.

yes it does speed up the recalibration process, the 30mins is to clear the ECU so that it rememebers nothing, the 30sec is to let it reboot so to speak, its like updating system files on a PC it needs to reboot to use them the ECU works in the same way, and as for driving the "tit's" of your car, your ECU will learn how you drive and the first 2-300km is its steepest learning curve so you have to shape it so to speak so that you get the end result that you are looking for.

eggbert_99 Grand Master

eggbert_99

Posted
Posted

They dont have any more stock until week after next.

They said its an copy of the TRD one. so I cant imagine a huge difference in performance.

Ive put my name down for 1.

Any one in sydney (hills) able to help out with an install ? Beer and lunch down at the local pub ? :D :D

gravityfreak Community Regular

gravityfreak

Posted
Posted
They dont have any more stock until week after next.

They said its an copy of the TRD one. so I cant imagine a huge difference in performance.

Ive put my name down for 1.

Any one in sydney (hills)  able to help out with an install ? Beer and lunch down at the local pub ? :D  :D

Check you PM's - I'll give you a hand

HIROLA Proficient

HIROLA

Posted
  • Author
Posted

the pod is simota same brand as the CAI itself, it seems to do ok, i may change to a K&N extreme later on down the track

lazyboy Enthusiast

lazyboy

Posted
Posted
the pod is simota same brand as the CAI itself, it seems to do ok, i may change to a K&N extreme later on down the track

have you got the part number for the simota CAI?

thanks

MotoMan Veteran

MotoMan

Posted
Posted

I would also be very interested in this CAI if its only $210..

although im in Melbourne so it might be hard to get.. and install

Anyone in Melbourne want to help me install?

  • 2 weeks later...
mx83toy Proficient

mx83toy

Posted
Posted (edited)

im a little comfused :) about the VSV hoses??? what goes /stays blocked ect.

Edited by mx83toy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    2. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    3. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    4. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    5. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    6. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    7. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    10. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership