Jump to content

Damnfuzz's ZZE123

Damnfuzz

By Damnfuzz
in Members Rides

 Share

Recommended Posts

Damnfuzz Proficient

Damnfuzz

Posted
Posted (edited)

Hey guys,

I have finally been bothered to set up a post about my car. Lazy? Much! Will try and put some comments about the set-up too, for those who, like me, use the search function alot before deciding on a mod.

Details:

2005 facelift Corolla Sportivo

88000km

Condition: Not as good as I would like, but you get that. A few scratches and minor scrapes, but nothing I can't live with. For now...

Now with added fizzle-fizzle...and photos

Wheels/tyres:

17 x 7" Advanti ADR-10 wheels, 4x100 PCD (obviously), offset +40.

215/45R17 Bridgestone Potenza Adrenalin RE002 tyres

Comments: Yes, they may look a little like the standard wheels but they are darker in colour and with the improvement in offset, look much tougher in my humble opinion. Yes, the tyre combo is not ideal. As many will race to point out, with this combo and a lower car (more on that shortly) I do suffer from a little bit of scrubbing on sharp or decent sized bumps. The previous tyres (Federal 595EVO) did about 35,000km, which is a lot less than the 57,000km I got from the original ER30s, but I'm happy with those numbers. I found the Federals pretty good. Not awesome in the wet, but a massive leap ahead from the standard tyres in terms of speeds that can be held in corners. Wear is good and noise is quite acceptable.

Suspension:

Eibach ProKit springs (currently 32mm lower at the front, 35mm at the rear), Koni Sport adjustable shocks, Whiteline HD rear sway bar, Whiteline front strut brace, front guards lipped. Top of tyre to guard measurements are FR 28, RR 40, and centre of hub to guard measurements are FR 340 and RR 350.

Comments: Big improvement over standard, if you can bear a firmer ride. The rear sway bar made a big difference, dialing out lots of the understeer, and combined with the springs keeps the car a lot flatter with much less body roll. Looks wise too it's a big improvement on the standard set-up which causes the car to look like an oversized roller skate;) I haven't had any tyre wear issues so far, with the wear across the tread appearing pretty even. I swap my tyres around every 5000km. The trade off, as with the vast majority of "sports" suspension offerings, is a firmer ride. The springs aren't overly firm, but you certainly feel more of the road. For me, that's a good thing. For the wife, not so... The ride quality is excellent for a lowered spring, and combined with the Koni's is a very tidy set-up.

Engine/intake/exhaust:

CES Racing 2.5" stainless steel catback exhaust with s/s flanges, CES Racing CAI with K&N pod, CES Racing ceramic coated headers.

Comments: Hello 14% increase in peak power and 16% increase in peak torque, both fractionally earlier than standard. More power and torque across the powerband from 3500rpm, with biggest gains to be had when LIFT kicks in! The exhaust sound is pleasingly deep and purposeful, and when she lits lift, whoosh! The noise is awesome! The wife is still getting used to the increased noise...

Brakes:

DBA Street Series slotted rotors front and rear, QFM A1RM street/track pads all round, Lucas GP600 DOT 4 fluid.

Comments: Well, they look more impressive...;) The rotors seem to cope with heat build up better than the old ones, and the pads have definitely helped pull the car up faster than it used to. The A1's copped a flogging at Wakefield and loved it. Tyres gave up long before the brakes did...

Audio:

Clarion CZ509A headunit (BT, Ipod etc), MB Quart Reference splits, Rockford Fosgate 4 channel amp and 12" sub, Dynamat for front doors and bootlid.

Comments: More than adequate for my listening needs. Goes hard when I want it to, but produces quite a clear and crisp sound. It's not going to win any sound comps, but I don't need it to. It cops a fair assortment of music styles from my Ipod, so I needed something that was an alright all-rounder.

Miscellaneous:

Phillips BlueVision globes (headlights, parkers and fog lights, 4000k), BlueVision globes for the number plate lights, Isotta stubby aerial, TRD/Whiteline stickers/badges.

Comments: Everyone knows a good sticker adds 20kw and 15km/h to your top speed... Well, I just like supporting a brand. No TRD bits on my car. Yet. The globes are a nice improvement, whitening the light, and they're ADR compliant too! Stubby antenna is purely for aesthetics, as I don't listen to radio much at all, and didn't want a fishing rod attached to the roof any more.

Thanks for having a look guys.

Edited by Damnfuzz
Kenshin X Grand Master

Kenshin X

Posted
Posted

any pics mate??

he did say pics were coming..................................................... :lol:

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

Ah, yes, patience is a virtue...

Let's hope I got some file sizes right...They were HUGE to start with. Apologies for the camera work. And the dirty car. 

post-18226-128384396962_thumb.jpg

post-18226-128384398646_thumb.jpg

post-18226-12838439994_thumb.jpg


Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

And just a couple more. I need to work on lighting for my photos, but I was in a hurry today so no quality. Soon my precious, soon...

post-18226-128384455798_thumb.jpg

post-18226-128384456841_thumb.jpg

post-18226-128384457845_thumb.jpg

and1 Grand Master

and1

Posted
Posted

Nice clean looking facelift stivo. The noise you hear when decelerating is due to the slotted rotors.

Kenshin X Grand Master

Kenshin X

Posted
Posted

i looked at your tyres and was going to comment on them looking good from the side when i noticed they are federal EVOS! :clap: :clap: :clap: win-win mate :yahoo::toast:

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

So nothing to worry about and1? Just something to get used to I suppose. Took some night shots this evening, might post a couple up tomorrow. Which reminds me that its time for a new tripod...:(

Next stop, a Whiteline strut brace and some go faster (and noisier) goodies. Am hoping to have them teamed with a readout of how many killer wasps the 5 year old baby is still putting out...Hopefully not too many will have flown away before dyno time...:clap:

Stay tuned.

juvenile Grand Master

juvenile

Posted
Posted

Nice car,very nice.. I like your rims too, 8.25kg not bad for Advanti, Ive been looking at them too,they look great in the brochure...Good work :)

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

Whiteline front strut brace added this morning. After arguing with the strut top bolts in order to get them off, all is well. Now to find some corners to test out the new found rigidity...

  • 2 months later...
Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted (edited)

Oh no..... sway bar cracked! Argh!

Sway bar removed (in two pieces), and sent back to Whiteline hopefully for replacement.

Sad face.

Also discovered that the last little part of the exhaust piping before the muffler is tapping on the chassis. Grrrrr. Need to take the car back to my exhaust shop and get them to put a gentle bend in it to clear the chassis... Double grrrrr.

Edited by Damnfuzz
lateralus Grand Master

lateralus

Posted
Posted (edited)

good luck getting the replacement sway bar from whiteline. they took 2 months to tell me they won't have any more until january 2011 :angry:

Edited by lateralus
dyslexik Grand Master

dyslexik

Posted
Posted

Also discovered that the last little part of the exhaust piping before the muffler is tapping on the chassis. Grrrrr. Need to take the car back to my exhaust shop and get them to put a gentle bend in it to clear the chassis... Double grrrrr.

Does the piping follow the stock piping position?

Is the CES exhaust piping hitting the undercarriage or your torsion beam? Maybe try using a shorter or longer hanger arm respectively to see if that fixes the clearance problem.

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

Decided to post some images from a recent drive day on the Old Pacific Highway and Putty Road. They are making me happy in the wake of the loss of my busted rear sway bar...

post-18226-0-34801600-1290570355_thumb.j

post-18226-0-44569100-1290570372_thumb.j

  • 6 months later...
Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

New tyres on today... :yahoo:

Bridgestone Potenza Adrenalin RE002 in 215/45 R17.

Now to find some corners...

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

Bridgestone Silverwater

See the RE002 thread in the wheels/tyres section for prices

I am very well acquainted with the Old Pacific Highway, but I also enjoy the Blue Mountains and Putty Road...

Got a trip to Wakefield Park coming up though.

Adrian

Damnfuzz Proficient

Damnfuzz

Posted
  • Author
Posted

Will be down at Wakefield on the 1st of July. Lap times were a fairly tardy 1.19 or thereabouts. 1.19 seems like an eternity, especially when everything else there was marked, EVO, WRX, and even a ZR1... :o

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    2. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    3. 0

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    4. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    5. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    6. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    7. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    8. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    9. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    10. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
×
×
  • Create New...

Forums

News

Membership