Jump to content


Recommended Posts

Posted

Haha nope, didn't realise that pic saved (computer crashed out & it's a MS paint edit) but have the wrap now so maybe this weekend. And not sure when the box is getting wrapped yet, she hasn't finalised design yet.

Posted

Hahaha well if you need a hand this weekend let me know.... I got the weekends off....

Posted (edited)

well i'ts been a few weeks now and the springs have settled nicely. this pick was taken at my local Kebab shop n thought it looked cool.

all i need now is a nice set of rims to set her off.

post-22100-0-12304400-1389613677_thumb.j

Edited by mr-rukus
  • Like 1

Posted

well i'ts been a few weeks now and the springs have settled nicely. this pick was taken at my local Kebab shop n thought it looked cool.

all i need now is a nice set of rims to set her off.

Definitely sits a lot better, especially on the rear of the Rukus it looks like it's on stilts :P How does the springs ride? Did you end up just going to pedders?

Posted

well i'ts been a few weeks now and the springs have settled nicely. this pick was taken at my local Kebab shop n thought it looked cool.

all i need now is a nice set of rims to set her off.

Definitely sits a lot better, especially on the rear of the Rukus it looks like it's on stilts :P How does the springs ride? Did you end up just going to pedders?

cheers mate. yea for now i've just stuck with the pedders springs funny enough they ride really nicely not as harsh as i thought. I'll be sticking with these until i can afford air suspension setup

Posted

some pics from today, also pulled out all the interior pieces to get
hydrodipped, that will be done within the next couple of weeks, have to
order in the pattern,also ordered the grillcraft grill for the bottom,
as i no longer use my foggies due to the custom drls i got made this
will def give it a fatter meaner face, i am also on the lookout for
some new shoes, also custom modded the 2 little rear bar lights down the
bottom, they work as a reds / brake and also work as a amber indicator
too ( half cuts ) to go with the rest of my theme.



IMG_2964_zps00df53d1.jpg

IMG_2963_zpsc6a48ff0.jpg

IMG_2960_zps45b43f59.jpg

IMG_2965_zps2abf008f.jpgIMG_2967_zps0daab7cf.jpg



IMG_2980_zpsf42ae670.jpg



that's it for now peeps.

Posted (edited)

Niceone flexin. Anychance i can buy your foggies from you?

Just an update on mine today we installed the lineout converter. Ran two gage wire and speaker wire to the boot and installed my subs and mono block amp. Damn im happy with how it turned out.

damnit i should of detailed the inside of the rukus before taking the pics lol.

does anyone know of a good Fiber glasser that can fiberglass my subs in. the box in these photos are from my Swift's build so it fitted in that nicely. now need to do something different

post-22100-0-18031000-1390812368_thumb.j

post-22100-0-16018100-1390812405_thumb.j

post-22100-0-12802400-1390812449_thumb.j

post-22100-0-05674500-1390812503_thumb.j

Edited by mr-rukus
Posted

Niceone flexin. Anychance i can buy your foggies from you?

Just an update on mine today we installed the lineout converter. Ran two gage wire and speaker wire to the boot and installed my subs and mono block amp. Damn im happy with how it turned out.

damnit i should of detailed the inside of the rukus before taking the pics lol.

does anyone know of a good Fiber glasser that can fiberglass my subs in. the box in these photos are from my Swift's build so it fitted in that nicely. now need to do something different

If you're in Sydney lifestyle car audio does some custom work, did a moulded sub box for my mates r34 a while back

Posted

Niceone flexin. Anychance i can buy your foggies from you?

Just an update on mine today we installed the lineout converter. Ran two gage wire and speaker wire to the boot and installed my subs and mono block amp. Damn im happy with how it turned out.

damnit i should of detailed the inside of the rukus before taking the pics lol.

does anyone know of a good Fiber glasser that can fiberglass my subs in. the box in these photos are from my Swift's build so it fitted in that nicely. now need to do something different

If you're in Sydney lifestyle car audio does some custom work, did a moulded sub box for my mates r34 a while back

ahh cheers. bugger forgot to put I'm in Melbourne

Posted

Niceone flexin. Anychance i can buy your foggies from you?

Just an update on mine today we installed the lineout converter. Ran two gage wire and speaker wire to the boot and installed my subs and mono block amp. Damn im happy with how it turned out.

damnit i should of detailed the inside of the rukus before taking the pics lol.

does anyone know of a good Fiber glasser that can fiberglass my subs in. the box in these photos are from my Swift's build so it fitted in that nicely. now need to do something different

If you're in Sydney lifestyle car audio does some custom work, did a moulded sub box for my mates r34 a while back

ahh cheers. bugger forgot to put I'm in Melbourne

Try and message cductn on these forums, he may know a few in the Melbourne area

Posted

Niceone flexin. Anychance i can buy your foggies from you?

Just an update on mine today we installed the lineout converter. Ran two gage wire and speaker wire to the boot and installed my subs and mono block amp. Damn im happy with how it turned out.

damnit i should of detailed the inside of the rukus before taking the pics lol.

does anyone know of a good Fiber glasser that can fiberglass my subs in. the box in these photos are from my Swift's build so it fitted in that nicely. now need to do something different

If you're in Sydney lifestyle car audio does some custom work, did a moulded sub box for my mates r34 a while back

ahh cheers. bugger forgot to put I'm in Melbourne

Try and message cductn on these forums, he may know a few in the Melbourne area

Out that side of town give phatt audio concepts a call.... Or it's only glass just diy

  • 7 months later...
Posted

So finally pulled the air suspension outta the toaster last weekend... It feels so weird driving on lowered springs again....

Also pulled the entire stereo out... Now I need to wire all the factory speakers/sub back in....

Posted

So finally pulled the air suspension outta the toaster last weekend... It feels so weird driving on lowered springs again....

Also pulled the entire stereo out... Now I need to wire all the factory speakers/sub back in....

#Almoststocklyf

  • 4 weeks later...
Posted

Well I've been buying some cosmetic mods over the last couple of weeks. yesterday i recieved my weather shields and HID headlights. Pics below are of Weather shields. I'm going to get a mate of mine to install the HID's

post-22100-0-66223100-1412640578_thumb.j

post-22100-0-08986100-1412640629_thumb.j

  • 2 weeks later...
Posted

Fitted new shoes for my Rukus. Suspension is all stock at the moment.

post-31852-0-74727500-1413370152_thumb.j

  • Like 3
Posted

I got another parcel in the post today all the way from USA. some chrome trimming. they turned out really well.

post-22100-0-90686100-1413451086_thumb.j

post-22100-0-58916900-1413451097_thumb.j

post-22100-0-41247000-1413451108_thumb.j

Posted

Fitted new shoes for my Rukus. Suspension is all stock at the moment.

Liking the gold/bronze wheels on white, just needs to be lowered so it's not on stilts :P any plans to lower it?

Posted

@ Crypt

not at the moment, I'm lovin the look, I'm after the sporty, Rallye'ish look. And besides, my Rukus always travel loaded as it is the family car. Maybe next year, I'm looking at TRD lowering springs and King Springs. Thanks!

Posted

Fitted new shoes for my Rukus. Suspension is all stock at the moment.

Nice Rig. Good to see another QLD'r

  • Like 1
  • 3 weeks later...
Posted

I lowered ours with coil overs. The girlfriend is taking a little time to adjust to the fact that she can no longer ride over speed humps at 80kph, but she will get it figured out eventually!!

post-35970-0-38645400-1415610389_thumb.j

post-35970-0-97857700-1415610483_thumb.j

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership