Jump to content


Foot well illumination kit

Norm Tyler

By Norm Tyler
in 86 Club

 Share

Recommended Posts

JimNZ Explorer

JimNZ

Posted
Posted

HI Norm,

Thanks for the reply, yes my kit is fine and all the parts are there; I do have the instructions for the installations.

The issue that I have is connecting the kit up to the existing wire loom in the vehicle.

The connector inside the "A" Pillar is different to the diagram in the installation instructions. There are many wires into a 20 way plug, some colours duplicated.

I was wondering if yourself or others had this issue and which colours to connect too during the installation.

Thanks for your offer of help as I am a little bewildered.

Jim

  • Like 1
Norm Tyler Enthusiast

Norm Tyler

Posted
  • Author
Posted

Jim, I never had any issues with mine it was as the instructions show, sorry

JimNZ Explorer

JimNZ

Posted
Posted

Hi Norm,

Thanks again, I am wondering if my instructions maybe a different version to yours.

Would it be possible for you to email a copy of the instructions that you have to me?

This would be really appreciated and I can further check the connectors.

The connector in my instructions shows and mentions a "10 Way" connector, however at this location in my vehicle it is at least a 20 way connector.

Many thanks for your efforts in helping me,

Jim

Norm Tyler Enthusiast

Norm Tyler

Posted
  • Author
Posted

No worries instructions attached if you cant access let me know your email and I will send them to to direct.

mkpdf.pdf


JimNZ Explorer

JimNZ

Posted
Posted

Hi Norm,

Thanks so much, got the instructions ok. They are a little different to what I find in the "A" Pillar in my vehicle.

My vehicle's connector has a lot more wires in it than the ones in the diagram, although the colours mentioned do exist in the connector.

My only dilemma is that the Pink wire appears twice in my connector and I am unsure of which one to connect to.

The wires are also in a different place to the ones in the diagram,

Oh well, thanks so much for your efforts, I shall investigate further, may be, possibly for a later issue of the instructions around late 2012.

Best wishes

Jim

  • 5 months later...
Subaru86 Progessing

Subaru86

Posted
Posted

If you guys are talking about the footwell lights you can just wire straight to the Dome lights. 

But make sure you find which wires correspond to what before you start hooking it all up

  • 1 year later...
akhan Advancing

akhan

Posted
Posted

Hi Norm Tyler

I hope you still have the installation manual for the illuminations. If you can fwd me a copy on afrasyabkhanoo@gmail.com will be much appreciated.

thansk

  • 8 months later...
Andrew Webster Member

Andrew Webster

Posted
Posted (edited)

Hi Norm is there any chance you could email me a copy of the instructions for the PZQ51-33050 kit to webstersautogroup@ bigpond.com as I can not find them much appreciated.

Thanks 

Edited by Andrew Webster
  • 1 year later...
  • 2 months later...
Gary86 Advancing

Gary86

Posted
Posted

HI all - trying to get a copy of installation instructions to instal a under dash illumination kit in my toyota 86 - it is a genuine toyota kit but no instructions - go figure - if someone has them could they email them to robertsonsemail@optusnet.com.au. Cheers

Gary86 Advancing

Gary86

Posted
Posted

Just installed the illumination under dash kit - followed the instructions - including disconnecting the battery - took car out for a drive and now runs rough - poor idle and low end acceleration - not smooth at all - has anyone experienced this or have any suggestions?

Hiro Grand Master

Hiro

Posted
Posted
13 hours ago, Gary86 said:

Just installed the illumination under dash kit - followed the instructions - including disconnecting the battery - took car out for a drive and now runs rough - poor idle and low end acceleration - not smooth at all - has anyone experienced this or have any suggestions?

Chances are by disconnecting the battery you have reset the ECU and it needs to re-learn.  Give it a few trips to try and smooth out again

Gary86 Advancing

Gary86

Posted
Posted

You are right on the fact that seems it reset the ECU - found a solution on line that rectified the problem 

Did the following - refer attached image - worked a treat.

 

44AA6E04-8982-4365-8E81-1F3338FC14D7.jpeg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership