Just installed Aurion illuminated LED Door Sill Panel Scuff Plate

[xcyrix]

Just installed, spend a bit of time to figure the right wirings of the four doors to get them worked.

when the door open the light will come on same as the Courtesy/Side Door Lights. 

If anyone wants any info about the wirings, simply let me know. 

Great fun as a weekend minor project. 

 

Cheers

 

[KAA]

nice work looks great

KAA

[trentmeyer23]

Well done.

[Full-Throttle]

Looks good, especially with the blue on blue! 

[GDude]

Looks good, mate!

[JimNZ]

Hi, Great work; very interested where I am able to purchase them and the wiring info. Many thanks, Jim

[GruAncH]

I got some of these but the door didn't seem to want to shut with them set on the original plastic scuff, I thought I might have to take em out or modify it somehow?
Would love to see how you wired em in..

[xcyrix]

Hi Guys thanks for reply. 

Below is the correct wiring for the front passenger side and the left rear door LED illuminated door scuff plate.

I did not take any pictures for the right side doors however I will explain.

 

Front passenger side: As pictured, it is located the left corner below the glove box

                                   Red: 12V (+)

                                   Orange with silver dots  Ground(-)

 

Driver side:  Same connector as the front passenger side, there are a lot wiring on this side so please do not make a mistake(KEEP YOUR EYES OPEN)             

                                     Red: 12V (+)

                                     Orange with silver dots  Ground(-)

 

Rear left Door:  Located behind the front seat belt mechanism as pictured, remove the cover you will then access it. 

                                     Red: 12V (+)

                                     Orange with silver dots  Ground(-)

Rear Right Door: Located behind the front seat belt mechanism, BE VERY CAREFUL the colour code is different here

                                     Black: 12V (+)

                                      Orange with silver dots  Ground(-)

 

To member GruAncH, There is no need to modify the original plastic scuff, just attach them to the plastic scuff directly. You will need to apply a bit of pressure to flat them so that the door can close correctly. 

 

To member JIMNZ, you can buy the LED scuff plate from EBAY, just put in the key words to search. 

 

Hope this will help. 

 

 

Cheers Guys 

                          

[KAA]

Thanks for the posts, love the effect and looks an easy enough project

KAA

[JimNZ]

Hi Everyone, thanks so much for the help, really appreciated, best wishes, Jim