David the Viking

Love the pics of my Aurion Northy!!

Great event guys, had a good time and very well organised.

So far:- 1976 Corona SE (18R auto) 1986 Celica SX (3S-GE manual) 1989 Camry Ultima (3S-FE auto) 1999 Camry Touring V6 (1MZ-FE manual) still own this, but selling soon. 1987 Crown Royal Saloon (5M-GE auto) 2005 Echo sedan (2NZ-FE auto) wifes run about. 2005 Camry Sportivo V6 (1MZ-FE manual) 2007 TRD Aurion 3500SL (2GR-FE supercharged auto) my current set of wheels.

Northfield sell and install the VAIS Soundlinq2 which can also play movies from the iPod. Was quoted $600 installed for the non video type in my Aurion. http://www.advancedice.com.au/product_deta...number=10018sou http://www.advancedice.com.au/product_deta...p?number=970755

A cracked cast exhaust manifold, happened on a Celica I used to own.

1 SILVABULLIT (QLD) 2 Northy (QLD) 3 Azza (QLD) 4 Superdave (QLD) 5 DHC09 (QLD) 6 M_M (NSW) 7 Mark(the good side of M_M) (NSW) 8 Aimee (NSW) 9 Yoshi (QLD) 10 Mick.wheelz (QLD) 11 Natedog11six (QLD) 12 T_Money (QLD) 13 Gavin (QLD) 14 AUR15 (QLD) 15 LTS60 (QLD) 16 LTS60 brother (QLD) 17 Xoom (NSW) 18 MOPP (VIC) 19 Zoran (VIC) 20 Donggae (VIC) *POSSIBLE* 21 Mono (QLD) 22 バハム－ト aka MarioX (VIC) 23 BigPete (NSW) 24 Tats (NSW) 25 whitestivo (QLD) 26 ZZR88 (QLD) *Possible* 27 SecaBoy (QLD) *Part of the weekend* 28 SupaTouring (QLD) Accomodation at F1 Motel 1.AUR15 2. Zoran 3. Mopp 4. バハム－ト aka MarioX 5. 6. 7. 8. 9. 10.

Its for the factory cd changer.

Hi everyone new to the Aurion section. Thought some of you may be interested in this pdf file that I found on the Toyota New Zealand site, as it has a listing for an aux input for the sat-nav systems. Toyota_Satellite_Navigation_and_Audio_Upgrade_Programme_01_Aug_07_to_01_Feb_08.pdf

You can buy just the shock/strut for the Touring from Toyota new. I have had kings low in my gen 4 for 7 years without any sag problems. I also used to carry a boot load of gear around everyday for about 5 years.

Touring has firmer springs (standard height) and Bilstein developed shocks/struts as where a standard gen 4 has Monroe shocks/struts. The other main difference is the Touring has a 17mm rear sway bar and the standard only a 15mm, both have a 17mm front sway bar. What colour are the springs currently fitted to your gen 4? Yellow=Kings, Red=Pedders, Blue=Lovells and Black=most likely original.

Australian gen 3 & 3.5 have the 3vz-fe with the same output, the US gen 3 had the 3vz-fe and the 3.5 was updated to a 1mz-fe. We didnt get the 1mz-fe until the gen 4. I believe that there is only a 5kW difference between the 3vz & 1mz being 136 v 141 stock.

Check out camcrew.com.au for others who love their Camry!

I have an OEM cd stacker with a cartridge that I am willing to sell. PM me if you are interested.

Use a flat blade screw driver covered in a rag to lever the bottom of the radio surround out on both sides. The A/C panel and radio surround are 2 pieces. Once the bottom clips are free you can pull the surround to free the top clips. Then there is just 4 screws holding the radio in.

Go and see these people as they make the most of the bushes that Pedders would use anyway Fulcrum Suspensions, 760 Fairfield Road YEERONGPILLY 4105, Queensland, Australia Ph: +61 7 3892 9000 Also the rear engine mount is not hydraulic, the front one is thou. Will only need an insert, but RH drive shaft needs to be removed as it goes through engine mount bracket. I would recommend that you replace the rear struts/shocks at the same time. There are NO radius rods in the Camry suspension so I would question what they have quoted you there. What you have listed is a big job that is probably best left to a workshop/mechanic to do as they will have a host + hydraulic press.