FS: 2zz-ge Turbo Kit

[51EKA]

FS: 2zz-ge Turbo Kit:

Complete bolt on kit include:

Hardware:

• Stafford Fabrication Manifold

• Garrett GT3076r .63rear

• Tial 38mm wastegate

• Bosch Bypass Valve

• Intercooler 550x200x88 2.5" inlet/outlet

• Custom stainless steel intercooler piping

• Drift Mesh Pod filter + K&N Pod filter

• ATP turbo accesories

• ATP Turbo braided oil feed line

• Speedflow 100 series oil return line

• Mr2 spyder idler pulley assembly

Electronics:

• Apexi Power FC + Hand controller

• Apexi Boost gauge

Fuel:

• Stafford Fabrication Aluminium Fuel Rail

• Speedflow 100 Series Braided Fuel Line + Speedflow & Earl fittings

• AEM Fuel Pressure Regulator

• B&M Fuel Pressure Gauge

• MWR 630cc injectors

• Walbro 255lph fuel pump

Exhaust:

• 2.5" Custom stainless steel dump pipe

• 1" Custom removable screamer pipe

• 3" Custom stainless steel mandrel bent exhaust w/ high flow cat

• 3" X-force LP-02 Gold seam weld Muffler 4.5" straight cut tip

• 3" Vibrant Ultra Quiet s/s resonator

Video

Setup cost $12,000+ to build... $8000ono

Open to resonable offers... Pm or email bugz_bunny07@hotmail.com

Edited November 26, 2009 by 51EKA

[Brad-dreama]

nice vids. i like the sound and your gear changes too ehehe.

[51EKA]

Lol.. Thanks. That's actually me babying the shifts so I don't break traction between changes and break boxes.

[daniel83]

where bouts in bris r u mate

[51EKA]

Southside Brissy. .

Edited November 28, 2009 by 51EKA

[123R-Prozak]

DROOLS :o :o :o :o :o :o i want :( lol

[51EKA]

Bump.. $7500ono Christmas Special.

Just put on a new exhaust for it too...

Pm me email address for more pictures.

[xoom]

jimmy can u explain where ur air filter is situated in this setup ? is it pretty much wedged onto the side of the turbo facing the wheel arch ? u got any under car pics to see the setup on the car ? more than just an open bonnet shot

[51EKA]

jimmy can u explain where ur air filter is situated in this setup ? is it pretty much wedged onto the side of the turbo facing the wheel arch ? u got any under car pics to see the setup on the car ? more than just an open bonnet shot

Yeh.. Unfortunately it's sitting on the turbo with the space available for the celica. About 1cm from the chassis.

Should be different story on the stivo if you went similar setup. You could probably route some piping so air filter sits in box. But that's not a problem in QLD because it's legal as long as it's secure.

I'll send you some pics.

[T_Money]

jimmy can u explain where ur air filter is situated in this setup ? is it pretty much wedged onto the side of the turbo facing the wheel arch ? u got any under car pics to see the setup on the car ? more than just an open bonnet shot

Yeh.. Unfortunately it's sitting on the turbo with the space available for the celica. About 1cm from the chassis.

Should be different story on the stivo if you went similar setup. You could probably route some piping so air filter sits in box. But that's not a problem in QLD because it's legal as long as it's secure.

I'll send you some pics.

thought about selling the car with the kit?

[51EKA]

jimmy can u explain where ur air filter is situated in this setup ? is it pretty much wedged onto the side of the turbo facing the wheel arch ? u got any under car pics to see the setup on the car ? more than just an open bonnet shot

Yeh.. Unfortunately it's sitting on the turbo with the space available for the celica. About 1cm from the chassis.

Should be different story on the stivo if you went similar setup. You could probably route some piping so air filter sits in box. But that's not a problem in QLD because it's legal as long as it's secure.

I'll send you some pics.

thought about selling the car with the kit?

Not really.. The parts on my car are worth more than the car itself.

Plus I already tried.. Noone was interested in something not so streetable.

[ELEGNT]

what happened to caracking 210 atw?

[51EKA]

It's already at 205kw...

I'm still working on it until it sells. I just got new exhaust fitted today. Might chuck it on dyno again soon.

[51EKA]

Bump...

New exhaust is 3" stainless steel mandrel bent, 3" magnaflow race cat, 3" magnaflow resonator, 3" vibrant muffler.

New greddy type rs fitted.

[51EKA]

Bump.. Throw me an offer.

The car now has a deadline. And will be stripped for parts and sold individually June/July if turbo kit not sold as a whole. Will cost a lot more for those that want to replicate this setup.

[Charlie Trout]

Bump.. Throw me an offer.

The car now has a deadline. And will be stripped for parts and sold individually June/July if turbo kit not sold as a whole. Will cost a lot more for those that want to replicate this setup.

Is it still for sale?