Anyone after TRD CAI??

[levinboy]

Found them on ebay USA

http://cgi.ebay.com/ebaymotors/Toyota-Matr...sspagenameZWDVW

pretty cheap in my opinion

[chicaboo]

Add $75USD for postage and then multiply it all out by 1.55ish into AUD, and the deal isn't so sweet after that.

Gav.

[jusuo]

Would this fit in the facelift stivos?

[TCSportivo]

Good looking price. Shame the Aus dollar is crap atm. Thanks for trying levinboy.

[Pro86]

very hard to put into a facelift stivo as im still figuring out how to put it in

[JSTCHLN]

very hard to put into a facelift stivo as im still figuring out how to put it in

Have you been following the pinned workshop submission and the instructions that come with the kit?

shouldn't be that much difference between facelift or prefacelift.

[IMB055]

I checked this out a while ago as it was looking pretty good - the figure I got quoted for 2 delivered to 2529 NSW was $473.85 US. Anyone want to do the currency conversion?

It looked OK, but like always I lost my nerve. I priced 2 to try and get some savings on the postage to make it a little more worthwhile.

[Blind Kid Seeks]

very hard to put into a facelift stivo as im still figuring out how to put it in

try harder! :P

Jaderd has one in his Facelift Stivo

[jaderd]

yeah its only tricky the first time, once you get it in you will be surprised at how easy you will be able to remove and put back in...30 min job easy from start to finish............just remember most ppl swap to a different pod filter like a K7N rx 3900 i think...cant remember of head as the TRD one i found too long and hits the fog light, so i opted for the shorter K&N fits alot better and doesnt touch fog light assembly at all.

Good luck mate...........worst case bring it to national meet and we will fit it for you

[daviboy]

+1 agreeing with Jaderd, i had a TRD cai with the supplied TRD pod and it fit into my facelift stivo, was a bit hard at 1st, took around 3 hours.

Remember you have to cut off the metal tab wellded onto the pipe, the 1 nearer to the pod side.

[Brad!]

Maybe 1ZZ is different but the tab didnt need to be cut off. I did however have to bend the ***** to change my lights.

With the TRD pod fitting with foglights, even with no light in the holder mine would not fit correctly and would inturn push the bumper out of the guard.

I ended up taking the foglight lense out and cover the whole with some black plastic.

Whats the cost of the K&N filter while we're at it.

[doriae86]

i got my intake from this guy

arrived fast, had no problems

[JSTCHLN]

Maybe 1ZZ is different but the tab didnt need to be cut off. I did however have to bend the ***** to change my lights.

With the TRD pod fitting with foglights, even with no light in the holder mine would not fit correctly and would inturn push the bumper out of the guard.

I ended up taking the foglight lense out and cover the whole with some black plastic.

Whats the cost of the K&N filter while we're at it.

nah mate i have a facelift sportivo and didnt have to remove it.

[levinboy]

Maybe 1ZZ is different but the tab didnt need to be cut off. I did however have to bend the ***** to change my lights.

With the TRD pod fitting with foglights, even with no light in the holder mine would not fit correctly and would inturn push the bumper out of the guard.

I ended up taking the foglight lense out and cover the whole with some black plastic.

Whats the cost of the K&N filter while we're at it.

K&N will set you back $89-$110 depending on where you go, recommend autobarn they are usually the cheapest and have stock

[SamO]

trd cai

[SamO]

brand new TRD CAI located in melbourne on ebay australia. Has about 19 hrs left..