Jump to content


Yaris Pod Filter

oodee

By oodee
in Yaris / Echo Club

 Share

Recommended Posts

oodee Grand Master

oodee

Posted
Posted

Just wanted to see if anyone had bothered with putting a pod filter onto a yaris to make it a little louder... i'm not looking for more power, i know how unlikely that is with this engine.

or if the panel filter changes the note at all???

K&N have pods for the 1.5L engine (http://www.knfilters.com/news/news.aspx?ID=1321) would that be any good on the 1.3L?

ruimond Mentor

ruimond

Posted
Posted
Just wanted to see if anyone had bothered with putting a pod filter onto a yaris to make it a little louder... i'm not looking for more power, i know how unlikely that is with this engine.

or if the panel filter changes the note at all???

K&N have pods for the 1.5L engine (http://www.knfilters.com/news/news.aspx?ID=1321) would that be any good on the 1.3L?

I have an AFE SRI Intake that i got from the US. That was made for the 1.5, but it fits the 1.3 as well.

This is a pic of it installed in my car.

intake.jpg

You might want to check our the Yarisworld forums as well for other options and other information. Its where i found out about most of my stuff.

oodee Grand Master

oodee

Posted
  • Author
Posted

you are right, i should go elsewhere for yaris stuff. there's not too much here.

how much did that set up set you back? And can you get a fully enclosed one? or is that good enough for Qld Trans


ruimond Mentor

ruimond

Posted
Posted
you are right, i should go elsewhere for yaris stuff. there's not too much here.

how much did that set up set you back? And can you get a fully enclosed one? or is that good enough for Qld Trans

Queit abit...from memory about $200-250 AUD. Since its a kit, but you could get away with making up your own custom kit. You can prob get an enclosed one with a shield around it maybe, but i don't think i've seen one. Im not sure about the rules in QLD, but the chances of someone checking you for it is rare.

Have a look on - http://www.yarisworld.com/forums/

Kenneth. Grand Master

Kenneth.

Posted
Posted

I'm looking into this aFe intake as well. However.. I'm wondering if the pod will get wet when it rains heavily or when you wash the car..

Ruimond? Care to share your experience? :unsure:

ruimond Mentor

ruimond

Posted
Posted
I'm looking into this aFe intake as well. However.. I'm wondering if the pod will get wet when it rains heavily or when you wash the car..

Ruimond? Care to share your experience? :unsure:

I've had it on my car for probably half a year to a year now. And have never run into any problems with it after a wash or even driving in the rain with it. My car is left outside most the time and has experienced some heavy rains on it, and has never really soaked up water or anything. Has been running good ever since i got it. So yeh no problems ever with rain/water.

Guest

Guest

Posted
Posted (edited)

I am about to do a pod filter install on my partners yaris... since the AEM, etc CAI kits you can buy are stupidly expensive, I will probably do something custom. will let you know how i go with it.

EDIT: have got a mate who can make up the pipe for me.

I will post pics and details once its all done :D

Edited by mick.wheelz
oodee Grand Master

oodee

Posted
  • Author
Posted
I am about to do a pod filter install on my partners yaris... since the AEM, etc CAI kits you can buy are stupidly expensive, I will probably do something custom. will let you know how i go with it.

EDIT: have got a mate who can make up the pipe for me.

I will post pics and details once its all done :D

thanks for that.

I had a ces cai on my stivo for a little while and i really miss the induction sound. i know i'll be getting nothing like that sound... but i want some sound at least, to know my car is idling without having to check the revs lol

I would be very interested to see what else is on the market out there... I could go and see uncle trev at CES, but doubt he'd have anything in stock for the yaris

oodee Grand Master

oodee

Posted
  • Author
Posted
Just has to be secured for QT, they can technically get you for emissions or a driveby noise test but that's if you just get a very picky cop.

Is that true?

Last I heard it had to be fully enclosed. I'll do some research and see what I can find regarding it and keep it in my car if I need to.

Kenneth. Grand Master

Kenneth.

Posted
Posted

I have tried searching regarding the laws on pod filters in NSW. But I can't seem to find where it is documented that it has to be "enclosed" or "mounted properly". I saw the VIC laws stating that it has to be a DRY filter and not an oiled one.

What is considered enclosed anyway?

Guest

Guest

Posted
Posted
Just pull off your intake resonator.. then you will get the intake sound. Just a cheaper option.

Does the yaris actualy have an intake resonator? I could not see one on mine...

Lunjiaow Mentor

Lunjiaow

Posted
Posted
Just pull off your intake resonator.. then you will get the intake sound. Just a cheaper option.

Does the yaris actualy have an intake resonator? I could not see one on mine...

Yeah it does. its the pipe that is in front of the airbox, you can just disconnect it.

Guest

Guest

Posted
Posted

here is a 'mockup' of the pod installation, just to see if it will work, where the pod fits, etc.

The final version will be one piece of bent stainless steel pipe.

dodgy_intake1.jpg

dodgy_intake2.jpg

Kenneth. Grand Master

Kenneth.

Posted
Posted

Nice work! How/where did you mount the MAF sensor? and how does it drive now? any CEL? =)

Guest

Guest

Posted
Posted

the MAF is now mounted in a piece of silicon hose with a small plastic hose protruding from it.

No CEL, and i think there is a small increase in performance... it certainly growls a bit more now

Speedz Grand Master

Speedz

Posted
Posted

I took my 'resonator' off and it just... 'noise' LOL

didnt like it but when i tried to put it back on i didnt do it properly and it came loose while driving somewhere lol...

got 2 duct tape to fill in the gap now and does its job of keeping the noise down ! lol...

DJKOR Grand Master

DJKOR

Posted
Posted
the MAF is now mounted in a piece of silicon hose with a small plastic hose protruding from it.

You forgot to mention the crucial part.... duct tape.

Guest

Guest

Posted
Posted
the MAF is now mounted in a piece of silicon hose with a small plastic hose protruding from it.

You forgot to mention the crucial part.... duct tape.

duct tape is like the force... it has a light side, a dark side... and it holds the universe together.

*NOTE: the final version will have a welded plate for the MAF, not duct tape.

Guest

Guest

Posted
Posted

here is a basic idea of what the final one will look like.

intake.JPG

¥uri Grand Master

¥uri

Posted
Posted

what program is that, if you don't mind me asking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Tyre Sale Specials

      Tried to search prices on mycar website & nothing would load Tyroola also has 15% off site wide. Some good prices depending what your looking for https://www.tyroola.com.au/
      L4WL3SS in Club Lounge
    2. 0

      overheated engine

      I drive a 2010 series 200 sahara V8 automatic. I recently towed a small caravan on a not that hotter day. The temperature gauge went to about half then dropped back to normal. The motor then went into limp mode and eventually stopped. On lifting the bonnet i noticed the top radiator tank had split all the way across. I have only two months ago had the complete cooling system checked with no defects. I called the RAA in South Aust and they tried to start it but just turned over but did not fire up. It was still pretty hot. I have been told the motor would be ruined by overheating. The car has been sitting at the repairers for 5 days now and as far as i know it has not been attempted to start. Before putting a new motor in it would it be worth putting a new radiator in it and see if it will fire up? Open to any suggestions at this stage.
      wayne m in Landcruiser Club
    3. 1

      1996 Trueno XZ - Is it worth modding?

      Depends on how common/rare they are in your part of the world. The XZ trim was the second-lowest so didn't come with most of the fun bits that the full-fruit BZG/V/R models did, so it's not anywhere near as desirable stock but sometimes you have to make do with what you can find, plus you shouldn't feel as guilty modding the heck out of it since most of it isn't special.
      Hiro in Classic Toyota
    4. 62

      VSC, Traction Control, Check Engine lights all on

      I attended Toyota Preston for Aurion ATX 2013 major service today. Cost $~$1300. On the way home I stopped to pick up dinner. Two fault lights: engine and VSC lights came on when I restarted the car. Car drove home just fine. I can only return the car tomorrow for them to sort out. Annoyed. Let’s see if they’re still on in the morning.
      57John in Aurion / TRD Aurion Club
    5. 1

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    6. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    7. 1

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    8. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    9. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    10. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
×
×
  • Create New...

Forums

News

Membership