Jump to content

Recommended Posts

Posted

Hey guys,

First blog.... I currently drive a 2004 Corolla seca ascent hatch... and am really keen to upgrade my muffler and exhaust system, i want to get a bit more noise out of it. Don't want it to be stupid loud but would prefer a good quality loudish deeper sound ahah... im keen for all advice anything would be appreciated as i don't know a whole lot....

cheers,

Posted (edited)

dont get a cannon style muffler.

if u just want some sound not really in it for the performance get a oval muffler much like this

jzi6m9.jpg

but if u want performance look at getting a full system

Edited by ELEGNT
Posted
dont get a cannon style muffler.

if u just want some sound not really in it for the performance get a oval muffler much like this

jzi6m9.jpg

but if u want performance look at getting a full system

Thanks for the response, i presume price is the main difference between getting a system that is gonna improve sound vs a system thats gonna improve performance and sound...

what sorta of price range's would i be looking at/what sort of thing should i be asking about? for sound and for sound/performance

Cause i'm just as keen to improve performance at the same time, but as with most things it comes down to dollar

cheers,


Posted
2.25" press bent catback system with a straight though muffler and a single hotdog shouldn't set you back more than a few hundred.

cheers mate for the info, will this improve performance as well?

can u recommened somewhere good to get it done? i live inner south side brisbane..

im really keen to do a good job with it and not end up with a ****ty milo tin

thanks

Posted
2.25" press bent catback system with a straight though muffler and a single hotdog shouldn't set you back more than a few hundred.

cheers mate for the info, will this improve performance as well?

can u recommened somewhere good to get it done? i live inner south side brisbane..

im really keen to do a good job with it and not end up with a ****ty milo tin

thanks

i was also curious as to the how a 2" would compare to a 2.25" regarding performance and sound?

Posted

2" is what your car comes with stock so dont even bother, and obviously 2.25" will become louder, i think you gain more power top end but mite lose a tad down lower in the rev range.

Posted

2.25" from catback is the way to go for the 1zz but if u dont want to upgrade the whole system, sportivo muffler does a treat or just get the sportivo exhaust from the catback from a wreckers and have it installed on your car.

Posted

thanks for the ideas.

by the sounds of it i should go with the full system of:

2.25" press bent catback system with a straight though muffler and a single hotdog

if i want a hum and not a fart in terms of sound and some performance thats the way i should go?

will price vary depending on quality of parts or is anywhere goin to sell similar quality setup for similar price?

If not... what sort of price am i looking at and where are some recommended places to go to avoid it looking and sounding ****

cheers

Posted

Just had a quote this afternoon, from Roy at AutoExcess (Melbourne) for $290 to supply and fit an XForce twin loop to my 06 IZZ-FE manual.

Dunno...seems reasonable.??

On another point, how many of you guys have actually declared your exhaust mod to your insurance company, and what exactly was their response..(eg increased premium, etc etc ..?) I'm with AAMI.

Posted
Just had a quote this afternoon, from Roy at AutoExcess (Melbourne) for $290 to supply and fit an XForce twin loop to my 06 IZZ-FE manual.

Dunno...seems reasonable.??

On another point, how many of you guys have actually declared your exhaust mod to your insurance company, and what exactly was their response..(eg increased premium, etc etc ..?) I'm with AAMI.

Apparently with the new AAMI policy (as of march or so) you get 3 mods before they bump up your premium.

I had extractors, catback + induction declared on my policy with no price change.

I had her lowered and I got a premium increase (it was about 11%). Getting a UR strut brace + rear sway bar soon so we'll see what happens when I change the policy again.

Posted
IMO 2.25" is far too small.

I would disagree with that statement.

A 2.25 inch system on a 1.8 litre 1ZZ is more than enough.

Posted
IMO 2.25" is far too small.

I would disagree with that statement.

A 2.25 inch system on a 1.8 litre 1ZZ is more than enough.

I agree with DJKOR,

just so you ALL know and understand this:

Standard 1zz-FE Exhaust piping is 1.75" - Peeshooter size

The Sportivo (2zz-GE) Exhaust is 2.25" - a very good upgrade from the standard 1zz exhaust.

The next option is a 2.5" catback exhaust, which WILL reduce preformance on a 1zz, if there isn't any mods to support this size exhaust. (eg. CAI and headers)

On a Sportivo, very good mod.

and of course, get 3" piping ONLY if running forced induction or upgraded ECU.

My 2c

Evo

Posted
IMO 2.25" is far too small.

I would disagree with that statement.

A 2.25 inch system on a 1.8 litre 1ZZ is more than enough.

I agree with DJKOR,

just so you ALL know and understand this:

Standard 1zz-FE Exhaust piping is 1.75" - Peeshooter size

The Sportivo (2zz-GE) Exhaust is 2.25" - a very good upgrade from the standard 1zz exhaust.

The next option is a 2.5" catback exhaust, which WILL reduce preformance on a 1zz, if there isn't any mods to support this size exhaust. (eg. CAI and headers)

On a Sportivo, very good mod.

and of course, get 3" piping ONLY if running forced induction or upgraded ECU.

My 2c

Evo

well said. i dont think anyone even has a 3" setup on their 2zz... thats NA.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      2017 Diesel d4d toyata hiace limp mode

    2. 1

      Tyre Sale Specials

    3. 0

      overheated engine

    4. 1

      1996 Trueno XZ - Is it worth modding?

    5. 62

      VSC, Traction Control, Check Engine lights all on

    6. 1

      1996 Trueno XZ - Is it worth modding?

    7. 1

      Query about the correct rotors for 2006 ACV40 Camry.

    8. 1

      Tyre Sale Specials

    9. 10

      Android auto

    10. 0

      E160 Corolla fielder suspension

×
×
  • Create New...

Forums


News


Membership