Jump to content

is this the rite CAI

Grey-Rolla
 Share

Recommended Posts


MR22ZZ Grand Master

MR22ZZ

Posted
Posted (edited)

this is what you want....

http://cgi.ebay.com/ebaymotors/AEM-COLD-AI...21182QQtcZphoto

All those ones are Short Ram Intakes

Brands to look for are AEM, INJEN and TRD

Short Ram Intakes are OK, you just don't get the as cold air as you do from the CAI which pulls from the front, bottom corner of the car. The SRI pulls air from the top of the engine bay...

Edited by Blue_Stivo
Danthuyer Grand Master

Danthuyer

Posted
Posted (edited)

(1 &2) notice how short the pipe is to the left of the MAF sensor hole????????? - wont fit

(3) pipe angle looks all wrong ....and it says MR2???

(4) may fit

(5) as dylan said ;) das is gut ya!?

Edited by Danthuyer
Ic3Man Mentor

Ic3Man

Posted
Posted

US$10 is pretty cheap for a short ram isnt it ??

and just wondering... are short rams and CAIs legal in australia ?

ZEEROLLA Grand Master

ZEEROLLA

Posted
Posted
US$10 is pretty cheap for a short ram isnt it ??

and just wondering... are short rams and CAIs legal in australia ?

Short ram is more "illegal" since you can see te pod easier!

Teknoman Experienced

Teknoman

Posted
Posted

since we're on the topic of intakes, i was wanting to purchase the TRD CAI, is it necessary to remove one of the foglights for this to fit? i have an 05 stivo

ZEEROLLA Grand Master

ZEEROLLA

Posted
Posted
since we're on the topic of intakes, i was wanting to purchase the TRD CAI, is it necessary to remove one of the foglights for this to fit? i have an 05 stivo

no but the TRD pod is huge so needs to be pushed up the pipe as far as it can go to clear the foggy.

lucio_libre Grand Master

lucio_libre

Posted
Posted

This is the one you want....http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7980804223&ed=1121395453000&ssPageName=ADME:B:EOTB:AU:6

Mine is waiting at the airport to get cleared through customs......should be installing it monday night.

DANZZT231 Grand Master

DANZZT231

Posted
Posted
This is the one you want....http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7980804223&ed=1121395453000&ssPageName=ADME:B:EOTB:AU:6

Mine is waiting at the airport to get cleared through customs......should be installing it monday night.

awesome, awesome.

melvinlau Experienced

melvinlau

Posted
Posted

i have the ascent, without the fog lights, so is it the actual fog light parts that interfere with it, or is it just the skirt where the fog lights are? so if i don't have fog lights, it'll fit fine?

oz_viking Grand Master

oz_viking

Posted
Posted

Its the back of the driving light that interferes with the filter. You should have no probs, just follow Danthuyer's instal guide.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership