Jump to content


Corolla Sportivo Clutch Change - Questions

Mellow

By Mellow
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts

Mellow Community Regular

Mellow

Posted
Posted (edited)

Hey guys,

I bought my Corolla Sportivo knowing it needed a clutch change so I bought an Exedy HD clutch for it which was delivered today. On the way home I booted it a bit in 4th and the clutch slipped quite a bit. Time to change it!

1. My mate is doing it - is there any guide on here for doing it? Anything to watch out for?

2. Do you guys normally have to skim the flywheel?

3. Do you guys normally change the main rear seal while everything is out?

4. What would be a typical length of time to replace the clutch roughly?

Thanks in advance guys.

Edited by Mellow
CHA54 Grand Master

CHA54

Posted
Posted

an experienced mechanic with a hoist should be able to get it done in 3 hours. You dont have to drop the whole subframe in the sportivo to get the box out. If it's being done on stands with a normal jack it takes longer, last one I did was about 6 hours taking a lunch break in the middle.

I would change the rear main and machine the flywheel while it's apart. Nothing worse than having to do a job twice due to cutting corners.

Mellow Community Regular

Mellow

Posted
  • Author
Posted

Thanks for the reply. Yea, my mate has a hoist, cheers for the tips.


CHA54 Grand Master

CHA54

Posted
Posted

I wouldn't put G70 into a box that doesn't already have worn synchro's. Lots of people use it in boxes that are fine apart from an incorrectly adjusted clutch master pushrod, all that does is promote syncrho wear.

123R-Prozak Grand Master

123R-Prozak

Posted
Posted

Let us know how you go

I've had mine out before morno's on the bench with a puller on the 6th gear to strip the box. Had it driving out the door that arvo.

ParvezK Community Regular

ParvezK

Posted
Posted

My '05 stivo is starting to crunch when I downshift from 3rd to 2nd in high revs around the 7000-8000rpms range.. Clutch is completely fine though. I'm considering changing the whole gearbox & clutch since I've got my tax return back haha :)

I've read up on the threads here about the clutch master push rod but will that stop the crunching for good? If it will then please recommend an experience mechanic that can readjust.

By the way, any suggestions for a suitable after market gearbox & clutch for a '05 sportivo corolla?

Cheers.

ParvezK Community Regular

ParvezK

Posted
Posted (edited)

May I ask why you downshift at 7-8? Not like u can go anymore in 2nd anyways ??

Sorry, that was an over exaggeration in the rpms but you know what I mean when downshifting! :/

Edited by ParvezK
JDee Enthusiast

JDee

Posted
Posted

Hey guys, i couldn't find any other thread for my question so i'll ask it here :closedeyes:

Anyways my clutch is starting to go (at 170 xxx K's) and im looking to get a new one. I was after an exedy hd cluch kit (part no. TYK-7334HD) as most people get, however i've contacted a US seller who cannot order it in as that model is based only for exedy australia dealers. He did however give me the option of an Exedy Stage 1 kit for the 2zzge (Part no. 16800) which can be found on the exedy us site.

I've compared both and they both have the same Size, Spline OD & No. of Teeth, and both have an organic clutch plates. So i basically just want to confirm that they're pretty much the same before i get it. Here is the link to it,

http://www.ebay.com.au/itm/EXEDY-RACING-STAGE-1-CLUTCH-KIT-PRIZM-VIBE-CELICA-COROLLA-MATRIX-MR2-1ZZFE-2ZZGE-/150927183404?pt=Motors_Car_Truck_Parts_Accessories&hash=item2323f60e2c

Thanks in advance guys,

JDeeee

CHA54 Grand Master

CHA54

Posted
Posted

that shipping cost doesn't really make it worthwhile. The clutches are basically the same, the HD exedy typically has a pink pressure plate.

JDee Enthusiast

JDee

Posted
Posted

Yeah i'm not buying that specific one, but im trying to get a deal with grip force for a stage 1 exedy clutch and a chromoly lightweight flywheel combo so overall its cheaper than buying it from here. (they have really good combo deals)

Thanks for your help though :)

david. Experienced

david.

Posted
Posted

ParvezK: rev match when you shift, it's good practice too ;)

123R-Prozak Grand Master

123R-Prozak

Posted
Posted

You goin through us? Dude just buy thr exedy kit here.. St Mary's clutches cheap as .. I got a free shirt when build custom clutch for the Mazda bpd

JDee Enthusiast

JDee

Posted
Posted

What do you mean going through us? And i'm from melbourne, where is St mary's?, cheapest quote ive got so far was 480 just for the clutch kit, ive seen it on ebay for 380 but yeah i want a new lightweight flywheel too, hence i recon i'll be getting a heaps better deal going with them.

xoom Grand Master

xoom

Posted
Posted

just my recommendation to the equation ;) ;) ;) shipping shouldnt be any more than around $250 i wouldnt think.

http://www.monkeywrenchracing.com/product_info.php?cPath=25_111&products_id=318

http://www.monkeywrenchracing.com/product_info.php?cPath=25_132&products_id=1074

http://www.monkeywrenchracing.com/product_info.php?cPath=25_132&products_id=372

http://www.monkeywrenchracing.com/product_info.php?cPath=25_136&products_id=720

http://www.monkeywrenchracing.com/product_info.php?cPath=25_136&products_id=721

http://www.monkeywrenchracing.com/product_info.php?cPath=25_111&products_id=717

ParvezK Community Regular

ParvezK

Posted
Posted

If only money did grow on trees.. *sigh*

xoom Grand Master

xoom

Posted
Posted

unfortunetely fella's u gotta pay to play .....

Kenshin X Grand Master

Kenshin X

Posted
Posted

unfortunetely fella's u gotta pay to play .....

sponsor me and i'll make sure u get 1 years supply of kebabs with free salmonella

Mellow Community Regular

Mellow

Posted
  • Author
Posted

I changed my clutch anyway yesterday including Nulon 75w-90 box oil and Nulon G70. Box feels much better. Clutch feels much lighter (Exedy HD) but it does feel very "grabby". It might bed in a bit more, but I was hoping for something a little smoother to be honest after all the glowing reviews on the Exedy HD.

Gave her an oil change too, new power steering fluid and a new air filter. Car feels much nicer to drive, picks up quicker and feels smoother.

JDee Enthusiast

JDee

Posted
Posted

I'm installing mine next week! hopefully it goes well. I ended up getting an exedy hd kit + lightweight chromoly flywheel and ARP flywheel bolts for $635 delivered!

  • 3 months later...
littleBlacks Enthusiast

littleBlacks

Posted
Posted (edited)

My '05 stivo is starting to crunch when I downshift from 3rd to 2nd in high revs around the 7000-8000rpms range.. Clutch is completely fine though. I'm considering changing the whole gearbox & clutch since I've got my tax return back haha :)

I've read up on the threads here about the clutch master push rod but will that stop the crunching for good? If it will then please recommend an experience mechanic that can readjust.

By the way, any suggestions for a suitable after market gearbox & clutch for a '05 sportivo corolla?

Cheers.

Is it worth to change the gaer box at the same time? Mine one is 10 years gear box orz... thanks

Edited by littleBlacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership