Jump to content


My Ride

peekay
 Share

Recommended Posts

peekay Grand Master

peekay

Posted
Posted

Well since my car does not fit any sections since it is a Honda. I thought I would show you the latest flavour of it now it is back on the road (after been used for ecu,exhaust and extractor development not on the car at the moment). The car is currently at 152kw at the wheels. I also have been offered Toda Cams and a Comptech supercharger as a development car (50 extra horse power and 30 lbs more torque) but I have not made my mind up yet about these). The wing is genuine Mugen as is the grille. Rice Rice baby.

DCP_0943.jpg

DCP_0946.jpg
Dead Grand Master

Dead

Posted
Posted

My boss has one of these Peeks. Awesome car. Long time no see too man...good to see you again.

peekay Grand Master

peekay

Posted
  • Author
Posted

My boss has one of these Peeks. Awesome car. Long time no see too man...good to see you again.

Thanks mate.....Yeah I know I have been out of it for a while. I have been travelling all over Australia for work some times back to the same place 2 or 3 times working 70 hour weeks. Been hard so have been to busy to do much else except work eat and sleep. But the project is almost over ...well this one any way already have another one to work on.....with more travel.

Dead Grand Master

Dead

Posted
Posted

My boss has one of these Peeks. Awesome car. Long time no see too man...good to see you again.

Thanks mate.....Yeah I know I have been out of it for a while. I have been travelling all over Australia for work some times back to the same place 2 or 3 times working 70 hour weeks. Been hard so have been to busy to do much else except work eat and sleep. But the project is almost over ...well this one any way already have another one to work on.....with more travel.

What the hell do you do??? Sounds like insano Mobile Project Manager or something lol. You're being compensated I'd hope <_<


peekay Grand Master

peekay

Posted
  • Author
Posted

My boss has one of these Peeks. Awesome car. Long time no see too man...good to see you again.

Thanks mate.....Yeah I know I have been out of it for a while. I have been travelling all over Australia for work some times back to the same place 2 or 3 times working 70 hour weeks. Been hard so have been to busy to do much else except work eat and sleep. But the project is almost over ...well this one any way already have another one to work on.....with more travel.

What the hell do you do??? Sounds like insano Mobile Project Manager or something lol. You're being compensated I'd hope <_<

National Deployment lead (1 of 5) for the rollout of our new desktop operating system enviroment for 12,500 desktops including migration and standardisation of the login client for all users within the organisation I work for ...IAG ...which owns NRMA,CGU,SWAN,SGIO,SGIC,NZI and a few others.

No paid overtime.... :unsure: but bonus's can be paid for the work...at mangers discretion...

Dead Grand Master

Dead

Posted
Posted

My boss has one of these Peeks. Awesome car. Long time no see too man...good to see you again.

Thanks mate.....Yeah I know I have been out of it for a while. I have been travelling all over Australia for work some times back to the same place 2 or 3 times working 70 hour weeks. Been hard so have been to busy to do much else except work eat and sleep. But the project is almost over ...well this one any way already have another one to work on.....with more travel.

What the hell do you do??? Sounds like insano Mobile Project Manager or something lol. You're being compensated I'd hope <_<

National Deployment lead (1 of 5) for the rollout of our new desktop operating system enviroment for 12,500 desktops including migration and standardisation of the login client for all users within the organisation I work for ...IAG ...which owns NRMA,CGU,SWAN,SGIO,SGIC,NZI and a few others.

No paid overtime.... :unsure: but bonus's can be paid for the work...at mangers discretion...

Far out man. No overtime??? That sucks balls! You're a hard worker. Come to Canberra and work in the government. It's cool, you just do your 38 hour weeks and if you do more you get flex. Half the time you don't do anything either!! :lol:

xoom Grand Master

xoom

Posted
Posted

ahhhh wat a dog box ... my stivo could tear it apart :P :P :P :P :P

Just stirring u paul ... as always lovely finish on the car that u own ... n u already know my thoughts on the development proposal about the s/c .... JUST DO IT :D :D :D :D

oVo Veteran

oVo

Posted
Posted

WoW! Nice Euro....Very Nice... ^_^

152Kw atw!! :o

How'd you push that?

Azza Grand Master

Azza

Posted
Posted

How'd you push that?

He gets his missus to sit inside the car with the gearbox in neutral and he stands behind and uses brute force.... lol...

vyets Mentor

vyets

Posted
Posted

woah

sex on wheels :P

euros are hot!

aint diggin the wing but everything else is daym hot.

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted

Mate put some wheels under it!!!! Honda has the uncanny knack of making alloys look like hubcaps :lol::lol: A big set of nice deep dish five spoke rims would be the real deal on it ;)

Looks good mate. I would have bought one but Honda are tight wads on fleet discount so I looked elsewhere(obviously).

152kw atw eh?? SO what is done to it if it hasn't had exhaust,headers etc etc done??? Don't tell me it's one of those "turbonators" with a couple of "hiclones" :P :P :P

Red_CT9A Grand Master

Red_CT9A

Posted
Posted

never bro ....

most prob just a badge yO

nevertheless....great looking ride u got :)

from what i have read on the honda forums....the accord euro's can actually pack a bit of a punch with some nice breathing mods :D

CAP Grand Master

CAP

Posted
Posted

So when's the next drive into the hills...

I'm sure Omn1potent, Lucio and Ilivfor6 are keen :D

peekay Grand Master

peekay

Posted
  • Author
Posted

So when's the next drive into the hills...

I'm sure Omn1potent, Lucio and Ilivfor6 are keen :D

We should organise it soon Carlos. I am itching to go for a drive....

since when did aus get euroRs?

They never did ...the car's performance and mods are along the EuroR line thats why the badges.. Also it is just there for the look.

Mate put some wheels under it!!!! Honda has the uncanny knack of making alloys look like hubcaps :lol::lol: A big set of nice deep dish five spoke rims would be the real deal on it ;)

Looks good mate. I would have bought one but Honda are tight wads on fleet discount so I looked elsewhere(obviously).

152kw atw eh?? SO what is done to it if it hasn't had exhaust,headers etc etc done??? Don't tell me it's one of those "turbonators" with a couple of "hiclones" :P :P :P

Nope not chaning the wheels. They were the same wheels on the EuroR. Yes the perofrmance is Extractors, Exhaust and reflash of the ECU and yes it has even got a Hiclone.... :P

xoom Grand Master

xoom

Posted
Posted

so mate when are you going to bring your baby up so you can launch it down @ WSID (eastern creek dragway) ;) ;) ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    2. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    3. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    4. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
    6. 3

      Disconnecting winch, lightbar and UHF

      Okay this might be dumb but it the ground the negative?
      citrus__grove in Landcruiser Club
    7. 3

      Disconnecting winch, lightbar and UHF

      Disconnecting batteries, ALWAYS disconnect the ground wire first. Doing this will also disconnect power, in general. Herb
      ozieagle in Landcruiser Club
    8. 3

      Disconnecting winch, lightbar and UHF

      Hey guys, I’m wanting to disconnect my current winch, lightbar and UHF as I have new plans. I’ve installed a winch previously on another car so I get it’s a case of following the cables and disconnecting from the battery, etc but but safety wise, should I start by disconnecting the battery so the cables aren’t live orrrr? And if so how do it go this haha?
      citrus__grove in Landcruiser Club
    9. 1

      Snapping wheel and axle studs

      Put a set of standard wheels on it and your problem will disappear. It is critical that the hole in the wheel centre is a snug fit on the axle boss (without wheel nuts fitted). If your wheels are sloppy on the axle boss this allows excess force on your wheel studs and they will break, as yours are doing. If you are unsure of what to do, go to a reputable tyre shop and get assistance.
      32V8 in Landcruiser Club
    10. 0

      2zz idle / roughness when accelerating past 3k

      Hey everyone was hoping someone might be able to point me in the right direction with this issue I've been facing for a while now. My Celica's idle will drop down to almost 200rpm when stationery after hitting operating temperature. Pretty much feels like it's about to stall out but never actually does. When taking off from a set of lights it almost feels like it hesitates or is down on power and then all of a sudden it lurches forward and gets a boost in power again. Then again around 1,500-3,000rpm it feels down on power and in what I can only describe in the engine feeling scratchy. Past 3,000 rpm it gets a little boost in power again but still definitely feels down on power compared to what it used to be and still has that roughness. Note lift is also not working at the moment but I have changed the lift bolts, planning on cleaning the VVT and VVTL-i OCV's New engine mounts have been installed I changed the MAF sensor about 4 years ago albeit not OEM. After doing some research my main ideas now would be a New MAF this time OEM, TPS, IACV or Coil Packs (Changed plugs 50,000km ago) Any other suggestions would be greatly appreciated!!! :)
      ik04 in Celica Club
×
×
  • Create New...

Forums

News

Membership