will these fit?

[XploShun]

i have spotted a set of rims!

but im not sure if it fits...

it says its:

SIZE OFFSET HOLE-P.C.D

16×7.0J 38・45 4-100

please help

i have a 1zz... does it make any difference? prefacelift as well. :P

thx in adv

[neK]

they sound like the would fit

size is good

pcd is good

offset....

I know the stockies are +45.

So what are those 38 or 45?

[XploShun]

yeh i know!!

wt the heck is 38 - 45!

[CHA54]

probably means the rims are available in either +38 or +45 offset in a 7" rim. There's plenty of offset calculators on the net for you to compare your current rims to the wider rims for the purpose of clearance estimates. Basically the higher the offset, the firther in the rim sits, but you have to take into account the difference in rim width when comparing to the original wheels.

[XploShun]

ooo icic!

now have my eyes on the sa90, its

16×7.0JJ 36 4H-100

the offset is 36... does that mean.. its too close inside????

i just found 2 offset calculator site..

whats the Wheel Width for our stock wheels?

if it fits the 2zz does it mean it will fit the 1zz???

and also.... question about center caps....

are they worth it??

does it come off really easily? can people just take them off with their hands?

i mean.. they r like at least $100 for a set of 4... rims have lock... do these caps have lock as well..

Edited January 17, 2007 by XploShun

[XploShun]

ive used the offset calculator that xoom posted

used the stivo 16x6JJ 45 as original (i still using the 1zz stock wheels, no idea about them)

and

16×7.0JJ 36 as my new wheel

it says:

The clearance from stut housing to the inside of the wheel will be 4mm LESS

The outside edge of the wheel will EXTEND an extra 22mm

so whats does the 1st one mean???

and also.. offset calculator... y didnt they ask for the wheel size.. like 16 or 17 and stuff

do u guys know what happened to the sa90 forge?? its not on wedssport homepage anymore..

[kcorro]

i used to use sa90 on my sedan. there is a photo of it in another topic. it sits very nice and is a strong high quality wheel.

[kcorro]

here is the other topic http://au.toyotaownersclub.com/forums/inde...?showtopic=8212

do u guys know what happened to the sa90 forge?? its not on wedssport homepage anymore..

forged was sa90 i think you should get the limited edition on any toyota.

Edited August 12, 2007 by kcorro

[XploShun]

hmm

whats so special about the bandoh?? (just did a search on their homepage... their race queens are HOOOOT! hahahha)

do they cost the same?? lighter? or what??

btw.. what does

The clearance from stut housing to the inside of the wheel will be 4mm LESS

mean??

kcorro... did u have these on? 16×7.0JJ 36?? its ok? no scrapping and stuff...

Edited January 17, 2007 by XploShun

[kcorro]

after years of the popular sa90 design weds released (about 1-2 years ago) the

Edited August 12, 2007 by kcorro

[XploShun]

i'll ask them about the price then...

limited edition ay..... i bet they still have stock... but gonna sell double the price... :o

do they have bandoh center caps? :P

[ar44]

Go the +36 offset! I find my wheels with a +42 offset stick into the guards way too much, especially at the rear.

[kcorro]

modified your hubs to fit 5 hole studs?

Edited August 12, 2007 by kcorro

[XploShun]

im goin to ask about the limited edition one...

but... that pic shows its a 5 stud rim...

do they have it in 4s???

if im buying.. im gonna buy the wedssport nuts too.. a set...

center cap.. its too expensive... .. but if they have bandoh x wedssport center cap... i can think about it...

[XploShun]

damn! i asked them about the bandoh wheel..

they said its sold out long time ago... and it cost the same as the normal sa90!!

fukfukfukfukfufkfukf