CAP

Nice Car, Welcome

906102 0502 - rear silencer with 2 tail pipes 92x78 mm It's the same one that fit's the European 1.6 vvti

Neither BMC is my pick

Welcome

I get good reception everywhere around melbourne Only get a crackle when at a certain intersection in the city which happens to all cars I've driven there.

I'm going shopping :D

Dude, like I said, I changed wheels alot of times before for myself and others on cars and trucks, I'm not the weakest guy around ( That's Lucio :P) , so when I say they're tight I mean it

Vamps, still remember the first time you tried to make me go deaf :D Welcome to the Club dude, Still the best install I've ever seen in a small car. You need to hear it to believe it boys and girls, SPL & SQL in the same package unreal!

Your car will have two plates on the fire wall a build plate by the manufacturer and an Australian compliance plate. If built in Japan the build plate will have "Toyota Motor Corporation Japan" If built in SA the build plate will have "Toyota Motor Corporation South Africa"

or a beer gut to lean on :P ← I was waiting for that one, you guys are getting slow these days :P :D

Excellent :D

Sure can. I'll bring my digi cam for photo's on the day. Anyone want to do video ?

VIC assistant here. :)

That's another thing that doesn't make things any easier, the standard wrench is too short and weak (It was bending) and then a bigger wrench I have from another car doesn't fit into the wheel.

Only thing I can do, but thing is, if they have them so tight they can strip the threads.

Well tonight I was going to spray my brake calipers, I had two spare hours, all the paint, newspaper and masking tape I needed, already cleaned the calipers the night before in preperation. So I go to remove wheel no 1, something I've done countless times before, but fortunately not in this car as I've never had a flat ( And after tonight very glad ), So out with the wheel wrench, a bit tight, won't budge, try with my foot on the wrench, no movement, a few hits with the rubber mallet nothing, leverage with a longer steel bar on the wrench nada. At this stage I was frothing at the mouth in a foul language rage. To further fuel my anger I decided to try every other nut on every other wheel with the same result, If I were to have had a flat, I'd have been left holding my d!ck in my hand and not able to change my wheel over because the a$$hole tyre/wheel retailer who fitted and balances my wheels has tighted all my wheel nuts way too much. So you now know what I'm now doing on Saturday morning, and my Calipers have to wait, again.

2zzge engined KE71 Super Sleeper !

Even if you find a 2zz & gear box dirt cheap from a wreck, it still wouldn't be worthwhile doing, trading up to the Sportivo is a much better proposition, not only because of cost, but also because you know you wont have problems with it because it was like that from factory.

Yes it costs $28,000 but you get a free Corolla Sportivo with it....

If it's actually turning over as normal, your battery should be ok but I'd be getting the alternator checked. It was most probably due to die at any moment and then the extra load from jump starting the car caused it to fail completely.

thanks motoman, i did do a good job didnt i northy isn't disappointing us isn't he. ← Yes let's not forget who did most of the work to it so far :D

:P ← Then MAP81 laughs at rollamods when it was in fact a 12mm bolt

Always said Azza should come back down to earth :P Looks Good, can't wait for Eibach's

honey

He's not called rollamods for nothing now is he :P