T_Money

im piking...going indoor rock climbing instead

That will do me. Cheers Azza!

Don't do it unless your car is lowered! Without an LSD all i get is solid wheel spin from the inside wheel around every corner as the bar is to stiff. (Sucks to be me back on stock suspension :( )

I had this problem. Bit of bearing grease on the end of a screwdriver did the trick nicely :)

\Was that with just stock wiring?

Stop talking about it and just do it!

I think i might pop out this week

Fuchs 10w-40 Titan GTO synthetic - great oil for the price - lasts 15,000 easy too if you need to extend it for some reason :)

Yeah what he said :P

do a search - I have covered all this before

Hey all, If I where to upgrade my headlight bulbs to 100w H4's H7's with 40A relays and ceramic bulb connectors, do you think that I might have issues with warping/melting of the plastic reflectors in the headlight assembly? I know that the polycarbonate lenses melt at 225 deg C so I am not worried about them. I guess i am just wondering if anyone else has had experience, and whether they have had issues with reflectors melting? Cheers N.B. I know this has been asked before but with no real answer :)

some in the engine bay on the right hand side and the others are above the glove box (take the glove box out to get to it easier)

put it under the seat rail screw. Make sure you take some paint off first so you get some good grounding

Things are looking very good for the I-met facility. We have been involved with quite a bit on the planning side of things and there are quite a few options for its placement. The Gold Coast City Council is being lame and not giving any preferential treatment to the developer but I'd imagine if the EIS gets through there should be no issues with getting the proposal up and running. I had a meeting with the developer the other day and he confirmed that it was going to be track above 6km's in length. He also mentioned that they had had preliminary talks with F1 Administration about hosting a F1 round at the facility in the future. Apparently they where not closed to the idea. Watch this space! Re: Darlington Park - I am currently working on the 104 lot Industrial Subdivision over the site. I have been around the track in the work hilux a few times. Its a wicked track and i can only imagine how challenging it would have been at some decent speed. It should have been kept. Now even MSI Karts has been closed. :(

Hey Mate, I have a guy that comes to me, does log book services, and is always at least $100 cheaper than Toyota. His name is Chris. Give him a call on 0432387811. Very experienced and very good at what he does. Cheers, Travis

1. SILVABULLIT 2. DHC 3. natedog11six 4.T_Money 5. 6. 7. 8. 9. 10.

Me too!

PM me with your mobile number and i'll MMS you some photos of the koni low/super low setup.

Its a universal joint , and i would suggest going to the wreckers to get one. The extension shaft i helped install on my mates HiLux came from behind the firewall through the engine bay to the steering box. Was quite easy to install, however you will certainly need a new universal joint o fit it properly :)

It will be fine :) You can keep using too if you want. I find that I use more E10 than what i do normal 91. In short no big deal compadré.

I know ARB do extension steering shafts, you will be hard pressed finding a knuckle thats longer... To the best of my knowledge the most you should have lifted the car was 1.75 inches so maybe a bit more checking of all components that are affected by the lift should be considered next time. Best of luck :)

where is Corey when you need him...

silva..r those adjustable koni's? Yes they are. Bought mine off him...they are very yellow and very adjustable :)

Looking forward to it!

They may have lift but we have Torque!!! A little bit more anyway :P