Jump to content


Racing Cooling Panels(same as C-one)


Danthuyer

Recommended Posts

^^^^^ you mean underbody cooling panel

???

that is correct :)

anyone has one? waiwong?

i just asked him and yes he does have one... how bouts do we go on getting it over there northy, how much would it roughly cost to get one made?

Link to comment
Share on other sites

  • Replies 309
  • Created
  • Last Reply

Top Posters In This Topic

Underbody cooling panel would cost a fair bit to produce as it's a little more complex than the radiator cooling panel and it's a hell of a lot bigger. I can always enquire about costs but I could almost guarantee it won't be cheap.

Link to comment
Share on other sites


Cooling panels are ready to be made for you guys.

If you would like to deposit monies PM silvabullit for details.

reference- Your forum name and cooling panel

For those who do want one, you will need to deposit a deposit of $40 into the account.

To find out how much postage you will need use this AUS post link

The dimensions of the unit are

60cm x 15 cm x 5cm (to be generous)

Once you have deposited could you please PM me with a copy of the receipt and I will put aside you cooling panael straight away.

Cheers

Sads

if i was to do this calculation on the aussie post website, what postcode would i list as the "lodgement postcode"?

Link to comment
Share on other sites

if i was to do this calculation on the aussie post website, what postcode would i list as the "lodgement postcode"?

Firstly Danthuyer is no longer on this forum and I am now organising these cooling panels. Depending on where most orders come from I may post them all together to save on costs and that way you can all get together and fit them at the same time. Apart for that happening I will post separate and postcode at this stage will be 4017.

Link to comment
Share on other sites

so this thing makes the engine temp cooler ey?

$80 ey?

deliver in bulk to save $$$ ey?

put me down for 1.

it will fit an 03 conquest ey? :)

If you would like to deposit monies into the following account

Craig N Sadler

BSB - 064011

ACC - 10068783

Desc - cooling panel

does is this still where i pay? which bank?

Edited by JJCRU23R
Link to comment
Share on other sites

so this thing makes the engine temp cooler ey?

$80 ey?

deliver in bulk to save $$$ ey?

put me down for 1.

it will fit an 03 conquest ey? :)

If you would like to deposit monies into the following account

Craig N Sadler

BSB - 064011

ACC - 10068783

Desc - cooling panel

does is this still where i pay? which bank?

PM Sent. All deposits and payments are done through me now as Danthuyer is no longer a part of this forum.

And yes it will fit an 03 Conquest:)

Link to comment
Share on other sites

so this thing makes the engine temp cooler ey?

$80 ey?

deliver in bulk to save $$$ ey?

put me down for 1.

it will fit an 03 conquest ey? :)

If you would like to deposit monies into the following account

Craig N Sadler

BSB - 064011

ACC - 10068783

Desc - cooling panel

does is this still where i pay? which bank?

PM Sent. All deposits and payments are done through me now as Danthuyer is no longer a part of this forum.

And yes it will fit an 03 Conquest:)

dude have you received my deposit? ;)

Link to comment
Share on other sites

so this thing makes the engine temp cooler ey?

$80 ey?

deliver in bulk to save $$$ ey?

put me down for 1.

it will fit an 03 conquest ey? :)

If you would like to deposit monies into the following account

Craig N Sadler

BSB - 064011

ACC - 10068783

Desc - cooling panel

does is this still where i pay? which bank?

PM Sent. All deposits and payments are done through me now as Danthuyer is no longer a part of this forum.

And yes it will fit an 03 Conquest:)

dude have you received my deposit? ;)

yes I have thanks!!!

also price is $80 plus shipping for those who have misinterpreted. :D Yes it will fit an 03 conquest with aftermarket grille.

Link to comment
Share on other sites

dave if you can get me a deposit by next tuesday/Wednesday that'd be ok. As for total inc freight it would be $80 plus about $10 approx for freight to sydney depending on how good I can wrap em up lol.

I will check my account tonight to see if any other deposits have come through.

cheers SB:)

Link to comment
Share on other sites

If I can get 5 people to place an order and deposit money then I will get a run of them made. But I need to get at least 5 done as that is the smallest number they will do at one time. The cost will be $80 each as the company who is doing the production has put up their prices. <_<

So if you want one then add your name to the list below.

1.Donza - Deposit received

2.1zzfewagon - Deposit received

3.JJCRU23R - Deposit received

4.YDOIT4 - Deposit pending clearance

5.Xploshun - Deposit received

6.Gus - Paid in full

PM Silvabullit for money transfer and bank details. :D

Check out my garage for a picture of the cooling panel.

PLEASE NOTE---- THESE ARE FOR PRE FACELIFT COROLLA'S AND SPORTIVO'S ONLY

LINK TO PIC---- http://au.toyotaownersclub.com/forums/inde..._item&CID=4

Updated list as of Today. Will check bank account for deposit from Xploshun tomorrow.

Cheers Silvabullit.

Link to comment
Share on other sites

If I can get 5 people to place an order and deposit money then I will get a run of them made. But I need to get at least 5 done as that is the smallest number they will do at one time. The cost will be $80 each as the company who is doing the production has put up their prices. <_<

So if you want one then add your name to the list below.

1.Donza - Deposit received

2.1zzfewagon - Deposit received

3.JJCRU23R - Deposit received

4.YDOIT4 -

5.Xploshun -

6.Gus - Deposit received

PM Silvabullit for money transfer and bank details. :D

Check out my garage for a picture of the cooling panel.

PLEASE NOTE---- THESE ARE FOR PRE FACELIFT COROLLA'S AND SPORTIVO'S ONLY

LINK TO PIC---- http://au.toyotaownersclub.com/forums/inde..._item&CID=4

Updated list as of Today. Will check bank account for deposit from Xploshun tomorrow.

Cheers Silvabullit.

Hey Brennden,

count me in. for payment, you still owe me, from the unfulfilled stive pedal order [ $105 ] from november 2005

Gus

haven't forgotten and i have also lost more of my own money than just your $105 through a so called wholesaler whose disappeared of the face of the earth with your money as well as $400 of mine :angry::angry: I will happily add you to the list and sort the difference out with you when the production run is complete.

cheers SB:)

Link to comment
Share on other sites

:o No u cant order till i pay which will be 2nite if all goes well with my pay so wait till 2moro to process the order i would have paid by then and hopefully it has processed by then im with westpac

so if Sb is as well then it will go through straight away otherwise it may take an extra few hours or so... ;)

Link to comment
Share on other sites

looks as though 4 of us are actually from NSW, 1 from central coast, the rest in metro syd area?

we gotta nominate a 1 person to recieve the sydney orders. itll be cheaper for us if they were posted together.

kick it to me!!!!!!

hehehe that way i dont need 2 drive all round sydney 2 pick it up :P

im 1min away from the Woodstock Ave exit of the M7...

or you could all just pick it up from me at the next monthly meet.. that is if its alright with all of you if you choose me 2 send it 2.

Edited by JJCRU23R
Link to comment
Share on other sites

AAAAAAAAAAAAAAAAAAHHHHHHHHHHH

NO FAIR!!!!

BUT I CALLED IT FIRST!!!!

DONT MAKE ME HAVE 2 GO DOWN THERE!!!!

HAHAHA

U 2 CAN GO HAVE A MINICRUISE DOWN THE M5 N M7! WHY NOT? :P

Edited by JJCRU23R
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Replace Front RH park light Corolla 2006

    2. 5

      Oil leak help!

    3. 0

      Oil Leak

    4. 1

      Aftermarket Air Intake

    5. 1

      Head Unit with Apple CarPlay

    6. 0

      RZN169 Poor fuel economy and low/rough idle at cold start up

    7. 0

      Any RA 60 owners?

    8. 0

      Bluetooth stopped working

    9. 0

      Purchasing 2014 Prado GXL - Requesting Inputs

×
×
  • Create New...

Forums


News


Membership