Jump to content


[VIC] - Winton Track Day on Saturday 20th Feb

Guni

By Guni
in Previous/Past Club Meets & Events

 Share

Recommended Posts

Guni Grand Master

Guni

Posted
Posted

POSTER.jpg

Sneeze.INC is organizing a track day next year and the response has been quite overwhelming. At my request, the nice Sneeze.INCers have agreed to extend the invitation to members of TOCAU VIC, NSW too if anyone is keen for a drive down :P

Anyhow, there are 70 spots and most have been filled up so get in quick!!!! Myself and Wil_Rolla have confirmed our attendance on track with a few more heading down to spectate so it would be nice to see more Toyotas there with especially rollas on the track :lol: I was there in May this year but have since change my setup so keen to see how well my new PB will be. I can pretty much say the same for Wil too :clap:

Anyhow,

Detail are as follows -

DATE: Saturday 20th February

MEET: TBA

TIME: TBA

DEPART: TBA

LOCATION: Winton Motor Raceway (Benella)

FORMAT: Sprint

PLACES: 70 MAX

COST: $140pp

[payment required by 30th of November to secure your spots]

Personal Requirements:

* CAMS L2S or AASA

* Long sleeve and long pants of non-synthetic material.

* Enclosed footwear of some type.

* ADR-approved helmet, either full face or half face is OK.

Vehicle Requirements:

* Fire Extinguisher: Securely mounted via bracket, preferably bolted down within reach of driver. Must be CAMS approved, 1KG or above.

* Tow Hook Point: If detachable type, please install it as this will speed up recovery times on the day.

* Aftermarket bonnets (CF/Fibreglass/etc) will require a secondary restraint, such as a strap/chain/belt/pins). This is not required for factory bonnets with a double-latching mechanism.

* Vehicle in good running condition, this includes:

- Tyres in roadworthy condition with enough tread

- No oil or fluid leaks

- Brakes in good working condition

- No loose parts, including battery

- Vehicle interior and boot clear from loose objects (including spare wheel)

Notes:

* Everybody is welcomed, no matter how new or experienced you are at circuit driving.

* Any passengers are required to fill in and sign an indemnity form. Passengers are allowed at any time during the day.

* Please be on time! We will begin scrutineering at 8AM sharp, you are also required to visit the pit office for document checks/filling in indemnity form.

* There will be a driver's briefing prior to commencing track time at approximately 9AM. All drivers are required to attend the driver's briefing or will not be allowed on track.

* Please make sure your car is prepared, the quicker everybody is ready to go and have their car checked, the more track time we can have.

* Cars will be divided into groups based on estimated laptime, this is to ensure that there is minimum traffic for you, and as a result you get a clean and safe run. Please provide an estimated laptime in your entry form if you have an idea.

* Timing will be posted on http://www.natsoft.com.au/ after the event, and may be viewable during the day near the scrutineering bay.

* This is not a competitive event, we are all here to have an enjoyable day. Please drive safely and follow instructions, or you will be banned from further driving.

https://docs.google.com/Doc?docid=0ARJlaSdw...ic2Ri&hl=en

Meng is your primary contact from Sneeze.INC and his email address is as below. You are more than welcome to shoot him an email for more queries :)

Please download the entry form and send to m3nG.13@gmail.com

Also remember to mention that you are from TOCAU and request banking details for payment to confirm/secure a place.

Sneeze.INC
wil_rolla Mentor

wil_rolla

Posted
Posted

i'll be there, i'm keen to try out my BC coils,,

i thought that all the spots have been filled?

anyways going to be an great day,, and i'm pretty sure Kolour will be there too,,

last time i was there was in Jan,, so i can't wait.. :yahoo:

Guni Grand Master

Guni

Posted
  • Author
Posted
i'll be there, i'm keen to try out my BC coils,,

i thought that all the spots have been filled?

anyways going to be an great day,, and i'm pretty sure Kolour will be there too,,

last time i was there was in Jan,, so i can't wait.. :yahoo:

Most spots have been but there are limited few left ....

My last was in May!!! :toast:

Tash Grand Master

Tash

Posted
Posted (edited)

Hmm..am interested in taking the Camry for a run but not at such a big event - I don't have any of the gear/licences required anyway. Will wait for one of Winton's other open days heheheh

However! I do have family in Wangaratta so am thinking I could make this coincide with a trip home and come and be a spectator :)

Edited by Tash

Guni Grand Master

Guni

Posted
  • Author
Posted

Tash, its 50 bucks to join and you can do it on that day.

Spectating is free! but participating is even more fun !!! :yahoo: :yahoo:

wil_rolla Mentor

wil_rolla

Posted
Posted (edited)

an open day,, by that do you mean the fun days? you don't need a AASA for that you just go and pay $30.. how ever i don't recomend them days.. as theres so many cars you can't get a proper run,, i'm talking 30+ cars on the track at the same time, and mixed performance levels..

events like these are more expensive, but way more enjoyable,, thats why me and Guni can't stay away,, :)

Edited by wil_rolla
Tash Grand Master

Tash

Posted
Posted
an open day,, by that do you mean the fun days? you don't need a AASA for that you just go and pay $30.. how ever i don't recomend them days.. as theres so many cars you can't get a proper run,, i'm talking 30+ cars on the track at the same time, and mixed performance levels..

events like these are more expensive, but way more enjoyable,, thats why me and Guni can't stay away,, :)

Yeah - pretty much that sort of thing, I have been to a couple in the past, must be my luck though as I've never seen one with that many on the track at one time.

Heheh Guni, I'll think about it, but so much stuff I'd have to get, like the extinguisher and racing gear and blah blah. Plus, would rather do it after I get the strut & sway! Definitely want to come along though and see how these things go :)

Guni Grand Master

Guni

Posted
  • Author
Posted

No worries Tash but if you read the above, it doesn't take much to be track worthy.

-: Car is in road worthy condition (no leaks and 5h!t like that and so on so forth)

-: Fire Extinguisher (Cost about $30 max for 1 KG)

-: Helmet (About $100 - $200 for a decent one)

-: AASA license (Sign up and get it on that day for about $50. Last a year)

I went in May and sent a bench mark for myself. Now I'm heading there to improve on it. :yahoo: :yahoo:

Just thought I let you know it isn't daunting as it seems ..... most imptly .... enjoy :lol:

Tash Grand Master

Tash

Posted
Posted

Heheheh cheers Guni - not too bad really I guess! Definitely hope to be able to make it along that weekend as a spectator :D

  • 2 weeks later...
  • 1 month later...
Guni Grand Master

Guni

Posted
  • Author
Posted

In my preparation for track tomorrow I checked my brakes and found most were almost "gone"!!!!! :o :o :o :o :o

P1000731.jpg

P1000734.jpg

P1000735.jpg

But lucky for me, I had spares waiting !!!! :spiteful:

P1000718.jpg

P1000719.jpg

:toast:

So installed it and away I go to a new PB tomorrow !!! :yahoo: :yahoo: :yahoo: :yahoo:

P1000721.jpg

P1000724.jpg

P1000725.jpg

P1000726.jpg

P1000727.jpg

:clap:

Guni Grand Master

Guni

Posted
  • Author
Posted

IMG_9374.jpg

IMG_9431.jpg

IMG_9537.jpg

IMG_9852-1.jpg

IMG_9967-1.jpg

I manage to get 2 clips from my car cam. Just need to figure out how to freaking get it out!!!!

:lol: :lol: :lol: :lol: :lol:

Fun day but didn't manage to crack my PB. Was just hooning around

:P :P :P :P :P

1stKill Grand Master

1stKill

Posted
Posted

Great pics mate,glad you had a good day hooning,no PB :( ...needs some more mods :D

Nice photo of the truth Alex :lol:

Guni Grand Master

Guni

Posted
  • Author
Posted

Thanks for that Alex. Was looking for that picture!

Lee, if your keen I've got a video of that debacle too. Just need to edit it from 15 minutes long to shorter.

wil_rolla Mentor

wil_rolla

Posted
Posted (edited)

was a good day,, but i too was off my PB,, not many people were as fast as they would like to be..

but all in all a good day..

not sure about you gunni but i was fighting my car all day.. wasnt as smooth as i would have liked..

Edited by wil_rolla
Guni Grand Master

Guni

Posted
  • Author
Posted
img8788640.jpg

:P

What are you on about mate? :huh:

I'm saying i missed out I forgotten all about it and I wanted to come

:(

Oh well ... its ok ...

There is one on 8th... You can see me then .... Maybe this time i can drift better ....

:lol: :lol: :lol: :lol: :lol: :lol: :lol:

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    2. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    3. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    4. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    5. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    6. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    7. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    9. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    10. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
×
×
  • Create New...

Forums

News

Membership