Jump to content

rev limiter? or something much worse?

Kenshin X

By Kenshin X
in Corolla / Corolla Sportivo Club

 Share

Recommended Posts

Kenshin X Grand Master

Kenshin X

Posted
Posted

hey guys just wondering, when in lift i have this wierd thing coming from the engine at around 7,700 RPM...

http://www.youtube.com/watch?v=t2VZNgN9XH8

rev limiter maybe, this is the best video i could film with my brother in the car lol, he seems to ALWAYS angle the camera away from the "8" when it nearly hits it. but i think the sound is very clear.

is this normal for a sportivo, should i reset the ECU, and thrash it after it reboots?

engine doesn't knock or ping or any other strange noises...

the noise is similar to rev limit but the needle stick does still creep a little more. Engine looses power as well when this happens...

somebody said clutch slip?

but i tried the diagnostics for the clutch but it all seemed fine...

very confused, hope its not something serious, but a the same time i feel i'm not getting the most out of my 2zzge :(

running everything stock btw...

thanks

Guest

Guest

Posted
Posted

that my friend is limiter by the sounds of it.

your clutch still might be slipping, but that noise is def. limiter.

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted
that my friend is limiter by the sounds of it.

your clutch still might be slipping, but that noise is def. limiter.

wow that was fast reply lol... but the needle still creeps up to 8... how do u set it higher? thrashing it high after resetting the ECU? when should u actually reset the ECU anyways? or changing the ECU?

can't stay in lift like this between shifts *cries* :(

Guest

Guest

Posted
Posted
that my friend is limiter by the sounds of it.

your clutch still might be slipping, but that noise is def. limiter.

wow that was fast reply lol... but the needle still creeps up to 8... how do u set it higher? thrashing it high after resetting the ECU? when should u actually reset the ECU anyways? or changing the ECU?

can't stay in lift like this between shifts *cries* :(

you cant set the rev limit any higher without an aftermarket ecu (e.g powerfc)... alot of people cant stay in lift between shifts, thats pretty normal...


King Young Mentor

King Young

Posted
Posted

I don't know about the others, but I can't hear anything out of ordinary. (certainly not the limiter) :blink:

DJKOR Grand Master

DJKOR

Posted
Posted

I could definitely hear the limiter on the 1st to 2nd shift.

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted

you cant set the rev limit any higher without an aftermarket ecu (e.g powerfc)... alot of people cant stay in lift between shifts, thats pretty normal...

but daddy! i don't want ot be normal...LOL,

how much would i looking for a good ECU? would it be a increase in power thru out or just like increasing the rev limit?

cheers

Suprathai Grand Master

Suprathai

Posted
Posted

Apexi Power FC will set you back around about $2500 I think, installed and tuned.

Is your car stock by any chance? Sounds a bit muted thats all... :lol:

encounta Mentor

encounta

Posted
Posted

Yup, definately rev limiter...

Don't know about the other's, but i used to keep lift in between gear changes without hitting the rev limiter..

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted

Suprathai - yeah its fully stock... the owner before did the muffler tip only. I very much DISLIKE the sports exhaust as i feel its too noisey for my liking and for a couple of KW, its not worth my money. <_<

Or MAYBE the camera was bad lol...

encounta - did you have the stock ECU as well?

BTW i just resetted my ECU (according to the TOC forums) and took it for a spin, there was a bit of improvement on gunning the engine. Also i dunno if it was my imagination, but the rev limit is a bit higher? :blink:

NFI seriously... <_<

who cares, i'll just keep driving it hard, hopefully the ECU is smart enough to know that I don't wanna gun it everytime and be easy on the fuel when i need it to be (ie looooong highway driving :P)

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted

BTW guys, i thought if i hit the rev limit, the needle move anymore higher... in my case it makes that sound but the needle still climbs abit. is this the way toyota programmed it?

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted
Apexi Power FC will set you back around about $2500 I think, installed and tuned.

Is your car stock by any chance? Sounds a bit muted thats all... :lol:

WOW! 2,500, looks in wallet and cries* pulls out 2 dollars LOL

guess i should start saving then :P

SuperDave Grand Master

SuperDave

Posted
Posted
Apexi Power FC will set you back around about $2500 I think, installed and tuned.

Is your car stock by any chance? Sounds a bit muted thats all... :lol:

WOW! 2,500, looks in wallet and cries* pulls out 2 dollars LOL

guess i should start saving then :P

That includes tuning costs too.

PowerFC is very cheap at the moment due to the strong dollar/poor yen.

123R-Prozak Grand Master

123R-Prozak

Posted
Posted (edited)

your rev limiter is normal, look what i "found" on youtube.... lol

Please wait a few seconds for Video to Load!
Edited by 123R-Prozak
Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted

thanks prozak, although that one seemed to sound alot meaner than my car :P

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted
Cause that one has cai, and chirpin 1-2 and 2-3rds lol

Oh yeah... I've got a custom made one. It's just a plastic tubing that extends around the inside of the chasis and ends just on top of the front lip haha. I wondered if it really made a difference or getting the proper one is better?

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted

correct me if i'm wrong, but i kinda thought that where the custom one is better becuz its sucking more air inside becuz of the poisition of the opening. the proper CAIs look like they are getting the heat from the engine + the outside air which can't be colder than pure outside air...

chef Collaborator

chef

Posted
Posted
correct me if i'm wrong, but i kinda thought that where the custom one is better becuz its sucking more air inside becuz of the poisition of the opening. the proper CAIs look like they are getting the heat from the engine + the outside air which can't be colder than pure outside air...

name brand = proven performance gains eg CES,TRD etc

SuperDave Grand Master

SuperDave

Posted
Posted
correct me if i'm wrong, but i kinda thought that where the custom one is better becuz its sucking more air inside becuz of the poisition of the opening. the proper CAIs look like they are getting the heat from the engine + the outside air which can't be colder than pure outside air...

You're not confusing with SRI (short ram intake)? On the zze corolla the CAI places the filter behind the passanger side fog light, there is a bit of a pocket there away from the heat of the engine bay.

Kenshin X Grand Master

Kenshin X

Posted
  • Author
Posted
correct me if i'm wrong, but i kinda thought that where the custom one is better becuz its sucking more air inside becuz of the poisition of the opening. the proper CAIs look like they are getting the heat from the engine + the outside air which can't be colder than pure outside air...

You're not confusing with SRI (short ram intake)? On the zze corolla the CAI places the filter behind the passanger side fog light, there is a bit of a pocket there away from the heat of the engine bay.

ahh cool cool, maybe i was confused, cuz i rememebered i saw some shorter and it was the SRI...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    2. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    3. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    4. 9

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    5. 9

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    6. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    7. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    8. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    9. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is and now working with nice cold air BUT every now and then we can hear and feel a buzz for a few secounds and today while my sister took my car I could her like a mild knocking sound when stopped but goes away when driving off. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    10. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
×
×
  • Create New...

Forums

News

Membership