Jump to content


IGO 8 Map Updates

Bruster

By Bruster
in Aurion / TRD Aurion Club

 Share

Recommended Posts

T_Money Mentor

T_Money

Posted
Posted

I'll be out tonight to grab this off DJ hpefully. If not i will hit you up. Monkey's working for SB managed to loose my SD card out of my GPS unit :P

Guest

Guest

Posted
Posted

I'll be out tonight to grab this off DJ hpefully. If not i will hit you up. Monkey's working for SB managed to loose my SD card out of my GPS unit :P

I will bring my lappy with all the **** on it...

DJKOR Grand Master

DJKOR

Posted
Posted

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip


byw Proficient

byw

Posted
Posted

Thanks heaps Daryl for posting the latest maps and allowing us to download it from your website. :clap:

private number Grand Master

private number

Posted
Posted

thanks DJ. just updated the gps. ill take it for a spin tonight and check for lag. Just had a quick look and all the roads i noticed werent there before the update are now there! woo!

humsuptivo Contributor

humsuptivo

Posted
Posted

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip

just in refernce to the above said. does GPS "lag" mean that the speech will sound like a fax or a corrupted mp3 file? i currently use a "AUTOGPS" unit with "iGO8" unsure of the version but i assume it is the latest as the seller sent it with the unit,on regular occassions the speech will sound like a fax. I have downloaded and reinstalled software which the seller has provided but still no luck. The only time the unit works is if i shut all speech off, turn off GPS volume and rely on visuals only. Does anyone else experience the same here? please advise, thanks in advance.

  • 2 weeks later...
Sera30 Proficient

Sera30

Posted
Posted

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip

Thank you Daryl for sharing the IGO8 maps works great

  • 3 weeks later...
Sok Advancing

Sok

Posted
Posted

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip

Hi DJ,

Thank you for posting the files. I have downloaded and install it on a SD card. When I run it on my Chinese in car GPS unit (7" touch screen), the image is too big to fit in the GPS screen. Is there a way to fix this problem? Btw I am pretty new to this, and I only know that my GPS unit runs on Windows CE 5.0.

Your advice is most appreciated.

Sok

Sok Advancing

Sok

Posted
Posted (edited)

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip

Edited by Sok
Sok Advancing

Sok

Posted
Posted

That would be good Mick! No rush buddy!

I have uploaded the files for all to access. The contents are as follows:

iGO8 system files + NAVTEQ 2010Q2 maps (latest) + 3D bulidings and terrain + Text-to-Speech (TTS)

The TTS may cause your GPS to lag, so I can't guarantee it. File size is about 524MB because of the 148MB of TTS stuff, but this is a one size fits all package. Just extract the iGO8 folder in the root of the ZIP onto the root of your SD card. Select iGO8.exe as the GPS program and you are all set.

Feel free to get them from here:

http://djkor.com/external/document/firmware.zip

Everything works fine now... Thanks for the wonderful posts....

sPike333 Progessing

sPike333

Posted
Posted

thanks DJ for iGO8...works great....except that im not too sure if the speed cam function works....i have been driving around but seems like there is no warning or something...my iphone navigon app used to warn me about speed cams all the time...and the iGO map doesnt show the red light and speed cams.....

any suggestion guys?

thanks

private number Grand Master

private number

Posted
Posted

Yeah I noticed that too. Some cameras that were there, are not showing up on the map now. I guess, if your not a speeder then you don't need to worry about where the speed cameras are ;) haha

  • 2 weeks later...
Sera30 Proficient

Sera30

Posted
Posted

Ok i have updated my IGO8 mapes from DJ's link on the Auspack unit I have. However, I have one problem that I cannot get around. When I start the Navigator, since i have updated the maps the unit wont pick up my GPS reciever. The only way to get around it is to go to the GPS settings and un tick the GPS enable box, change the BUAD from 9600 to 4800 and it will pick up the reciever straight away.

But when i exit the navigator or switch the car off it dooesn't hold those settings and reverts back to the original settings and again wont pick up the reciever.

I have searched the SD card for the settings but no luck. I have reseted the user data managment but no go.

Anybody else has this problem or has a solution??????????????

Sanz Collaborator

Sanz

Posted
Posted (edited)

Ok i have updated my IGO8 mapes from DJ's link on the Auspack unit I have. However, I have one problem that I cannot get around. When I start the Navigator, since i have updated the maps the unit wont pick up my GPS reciever. The only way to get around it is to go to the GPS settings and un tick the GPS enable box, change the BUAD from 9600 to 4800 and it will pick up the reciever straight away.

But when i exit the navigator or switch the car off it dooesn't hold those settings and reverts back to the original settings and again wont pick up the reciever.

I have searched the SD card for the settings but no luck. I have reseted the user data managment but no go.

Anybody else has this problem or has a solution??????????????

I'm having the exact same problem!!! Unfortunately I don't have a solution, but I'm sure someone here will help us out ;)

Edit: Just change the sys file to 4800 were it says "Baud Rate". I should've thought of that earlier, silly me!

Edited by Sanz
Sera30 Proficient

Sera30

Posted
Posted

Thanks Sanz....because it was only 2 of us with this problem I didn't think we were going to get a solution but we did. Well done Sanz

  • 2 weeks later...
  • 1 year later...
mc223_2 Progessing

mc223_2

Posted
Posted

I hate just randomly doing this.

But i have seriously been banging my head against a brick wall...

I've got one of the eBay DVD GPS units, and ive had iGO8 running on it for about 3 years or so, and in trying to update the maps.. i keep going round in circles.

I must have tried every iGO download on the internet.. and i get random errors to failed boot etc etc.

Im just looking for a copy of someones SD card.

I know DJKOR posted a complete package a little while ago, but im just after an 'image' of a working SD card with iGO and maps...

Any assistance is greatly appreciated...

Apologies again. :)

  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    2. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    3. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    4. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
    6. 3

      Disconnecting winch, lightbar and UHF

      Okay this might be dumb but it the ground the negative?
      citrus__grove in Landcruiser Club
    7. 3

      Disconnecting winch, lightbar and UHF

      Disconnecting batteries, ALWAYS disconnect the ground wire first. Doing this will also disconnect power, in general. Herb
      ozieagle in Landcruiser Club
    8. 3

      Disconnecting winch, lightbar and UHF

      Hey guys, I’m wanting to disconnect my current winch, lightbar and UHF as I have new plans. I’ve installed a winch previously on another car so I get it’s a case of following the cables and disconnecting from the battery, etc but but safety wise, should I start by disconnecting the battery so the cables aren’t live orrrr? And if so how do it go this haha?
      citrus__grove in Landcruiser Club
    9. 1

      Snapping wheel and axle studs

      Put a set of standard wheels on it and your problem will disappear. It is critical that the hole in the wheel centre is a snug fit on the axle boss (without wheel nuts fitted). If your wheels are sloppy on the axle boss this allows excess force on your wheel studs and they will break, as yours are doing. If you are unsure of what to do, go to a reputable tyre shop and get assistance.
      32V8 in Landcruiser Club
    10. 0

      2zz idle / roughness when accelerating past 3k

      Hey everyone was hoping someone might be able to point me in the right direction with this issue I've been facing for a while now. My Celica's idle will drop down to almost 200rpm when stationery after hitting operating temperature. Pretty much feels like it's about to stall out but never actually does. When taking off from a set of lights it almost feels like it hesitates or is down on power and then all of a sudden it lurches forward and gets a boost in power again. Then again around 1,500-3,000rpm it feels down on power and in what I can only describe in the engine feeling scratchy. Past 3,000 rpm it gets a little boost in power again but still definitely feels down on power compared to what it used to be and still has that roughness. Note lift is also not working at the moment but I have changed the lift bolts, planning on cleaning the VVT and VVTL-i OCV's New engine mounts have been installed I changed the MAF sensor about 4 years ago albeit not OEM. After doing some research my main ideas now would be a New MAF this time OEM, TPS, IACV or Coil Packs (Changed plugs 50,000km ago) Any other suggestions would be greatly appreciated!!! :)
      ik04 in Celica Club
×
×
  • Create New...

Forums

News

Membership