Hey hey,
Again, another great emblem mod from ClubLexus guys..
Enjoy!
Problem: After searching long and hard, couldn't find any matte blackemblems to purchase for the IS350... The black pearl emblems are out of the budget so I decided to just do it myself. Like most folks I hate the idea of having to use fishing line or something else to uninstall emblems then reinstall with new 3M tape.
Credit here.
SO here goes.. shooting black emblems with PlastiDip!
Materials
1. Can of PlastiDip purchased from Home Depot
2. Small plastic pick/spackle thing.
3. Masking Tape
4. Newspaper
5. Patience
6. Rubbing Alcohol, Soap, water
7. Cotton Swabs
8. Clean Towels
Steps
1. Clean around your emblems. Use soap and water if your car's real dirty. Then make sure you get down into the cracks. Dry it off and get back in there with some cotton swabs & alcohol. Again make sure the surface is dry before you even think about painting.
2. Mask off the area with some masking tape and newspaper in case of overspray.
3. Now you're ready to spray.. WHAT? NO SANDING? Right.. no sanding. Plasti Dip is a multi-purpose air dry, synthetic rubber coating that can be easily applied by spraying. Its been used on grills by BMW, Audi and many lexus owners too. Do a search and you'll see.
4. Make sure you shake that can up and do a test pass on some newspaper so you see how much comes out of the nozzle. From there shoot a thin coat on your emblems.
5. Wait a few minutes and make a darker pass.
6. Then give it 15 minutes or so then apply a second coat. I went and did a 3rd coat. I didn't want it to appear too thick.
7. I let it dry for about an hour before i decided to pull off my masking tape. Some folks say 30 minutes. The can said an hour.
8. Now peel off the masking tape.. You'll notice the rubber want to pull off with the tape, thats no problem, just don't go rubbing it too fast. Thats no fun. when the rubber breaks and u have to get into the little cracks of the emblems to pull it off.