Jump to content


Recommended Posts

Posted

Thanks guys! :D

Noodlez, i no u wunt wun. ;)

Posted

Tuesday to Friday this week has been hectic!!!

- Stripped the car right out

- Changed rear toe bolts

- Changed rear calipers, pads and rotors

- Changed to braided lines all round, newer corolla ones on the rear, celica ones on the front! (ffffuuu HEL)

- Swapped pads and rotors on the front - left to right - so rotors are now facing the right way

- Changed driveshaft

- Changed front left hub

- Changed gearbox oil

- Changed air filter

- New wheel alignment

- New tyres fitted for monday :spiteful:

Car feels tremendously better! Heaps more grip than before even on skinny kumho tyres!! and there are no brakes at all.... that is until theyre warm then they're friggin fantastic!!

Also a couple of pics, because i know how you all like pics!

Tried on 10mm spacers on the rear for lols... its a bit too much poke for my liking, still didnt rub much though :P haha

IMGP9491_zps37761463.jpg

IMGP9492_zps43db945f.jpg

IMGP9494_zpsde1276d4.jpg

IMGP9502_zps26b4087f.jpg

New tyres...

IMGP9510_zps402c466a.jpg

Old vs. new axle... longer one was axle binding as it was too long :(

66445_518825944805224_1245218583_n.jpg

Stock vs. HEL brake lines... rears fit perfectly fine, the fronts didnt... luckily used Jo's Celica GT4 front braided lines which fit better than the "AE82" ones...

208400_519027591451726_882031278_n.jpg

Tyrepower North Melbourne doing their thing!

601064_519389751415510_606659205_n.jpg


Posted

Dude you have very pretty fingers, have you considered modelling your hands, i think you would be good at it, you should come over and we should talk in my dungeon.

Posted

doesnt matter, free candy bro.

still awaiting pics from James so i can put my post up...

Posted (edited)

After all the work that I did on the car, I decided to go up to Winton on the Australia day public holiday with a few mates.

With the sole intention of having a good time and savoring the moment, I wasn’t really pushing for a PB, and with the scorcher of a day it was I knew that it wasn’t going to be easily achievable anyway unless I pulled out some crazy skills (which I don’t have lol)

560140_527671060587379_207231739_n.jpg

First session:

Went out on track with Jo (woot woot), car felt really good, heaps of grip than ever before but the first thing I noticed was it was lacking a lot of power compared to last time, in fact I couldn’t even get it up past 140 on the straight! :( Everything else with the car was spot on though.

2:08.5020

1:48.1720

1:46.6830

1:46.3360

1:52.2880

1:47.4950

1:46.9000

1:50.4440

555813_412656518821270_1473495293_n.jpg

;)The vest and drinks and clamps were found, unfortunately the hose wasn’t. We hacked it up with some clippers to ditch the cracked edges and with some help from Frank we managed to pop the hose back on with proper clamps.I went for a spin around the pits and revved it a few times to get oil pressure up and seems like the leak had gone!... lets get back to racing!! :clap:

2:28.6630

1:59.4090

1:49.4140

1:47.1070

531774_412662155487373_1173354489_n.jpg

379188_412656765487912_184346796_n.jpg

Third Session:

Managed to bring Bway along for a spin this time. The track was scorching hot at this stage. We warmed up the brakes and had a good dice with Andy and Mick in the sedan, and a very angry Gemini who got caught up in our fun.

The brakes got a good workout this session as we sat on the tails of the two cars ahead. Pretty sure Brian was surprised how well my brakes pulled up and the fact that there wasn’t even a hint of fade either ;) haha

The tyres unfortunately were goners after 2 laps and became really greasy, still they were very easy and predictable to drive on. They did give me a scare when they started vibrating whenever we turned right, but it was only a chunk of rubber stuck on the tyres lol

The car began to get hot and we brought her in early. The oil leaks had stopped, with only slight dripping, which we assumed was just the residue dripping off from before.

2:12.9050

1:47.1490

1:47.0380

2:26.3210

2:01.7740

1:50.0030

1:51.7800

382196_412662028820719_152544061_n.jpg

480361_412659735487615_535525268_n.jpg

13191_412660658820856_1685564699_n.jpg

11185_412662185487370_1548859617_n.jpg

Last Session:

This time I decided to go out by myself, with no passenger and no passenger seat the car felt very different. A bit more taily and throwable in the corners, it did exactly what I wanted. There was only a slight increase in speed where I was now hitting 145 on the straights (I was getting 155 to 160 last time!)

I had Tim in his EP3R following me, and the cars were very even in lap times. I was quicker through the corners but on the straight I would lose any advantage I had worked hard for… there ended up being only 0.05 seconds between us at the end of the day! Not bad for the tired and smoky 82 against a well tuned K20!

Ended up with my best time of 1:45.1080 for the day.

2:15.4750

1:47.1480

1:45.8020

1:45.1080 << PB of the day

1:47.2640

1:45.3290

2:23.7300

480343_412662108820711_545801978_n.jpg

I think if I had more seat time with myself alone in the car I could’ve taken half a second off easily, and if the weather was cooler another half a second. The motor on the straights drained any extra driving I did through the corners… :(

Big thanks to Jo, Steve, Brian, Andy and Frank for all their help and advice on the day, and to James for taking all the snaps! Much appreciated.

And to all those who came to the track day I am glad you all had a great time!! :)

Over the course of the 2 years that I have owned it, I have gone from a 1:49.6 to a PB of 1:44.4. There is more potential in the car but it always come to a point where you need to say enough is enough. It kills me to say this, but this brings a close to this chapter of the 82’s life…

405904_337549969599490_1655656791_n.jpg

308130_466235926730893_527980410_n.jpg

8810_495379553816530_1854354808_n.jpg

With a few things popping up over the last couple of weeks this also means that I am unable to build the SX. This opens a new opportunity and something that I never thought would occur, but the 82 will be moving on toward the end of the year and many of my bits are already up for sale.

734624_421111224636282_1536503954_n.jpg

580560_527667023921116_672259378_n.jpg

3539_527666887254463_165828667_n.jpg

Edited by 4ABHGE
Posted

that EP3R never had a chance...

AND YES I GOT IT RIGHT THIS TIME BASTERDS!

Posted

wait wut? another corolla bites the dust!?

I spose once you reach your goal it's time to move on to other challenges :closedeyes:

Posted

I would keep it Dave, if it was worth fixing. To bring it to the level I want it would need a reshell and engine rebuild which isnt feasible for me :(

Posted

Love this 82. Any scrubbing with your new shoes?

haha showing the EP3 how it's done :P

Posted

that EP3R never had a chance...

AND YES I GOT IT RIGHT THIS TIME BASTERDS!

You just saw it written down :P

Posted

beginning paint restoration...

IMGP0292_zps9e54046c.jpg

IMGP0293_zps502bc762.jpg

IMGP0305_zps52fae483.jpg

IMGP0309_zps71e24cb3.jpg

IMGP0299_zpsdd1f1581.jpg

bonnets a little far gone... two tone orange ;)

IMGP0310_zpsbcfc73ba.jpg

and not even finished yet and it looks this good! No1.gif

Posted

Thanks Duy!! I almost crashed today when i was too busy staring at the reflection rather than driving :P

Posted

Something different, tinted my fishbowl tail lights just to see how it would look... but im not 100% sold on them...

485343_534852683202550_890073107_n.jpg

  • Like 1
Posted

IMO it looks better without the tints.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now




  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

    2. 5

      High RPM Idle after the engine warm up.

    3. 0

      Tow bar

    4. 3

      Disconnecting winch, lightbar and UHF

    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

    6. 3

      Disconnecting winch, lightbar and UHF

    7. 3

      Disconnecting winch, lightbar and UHF

    8. 3

      Disconnecting winch, lightbar and UHF

    9. 1

      Snapping wheel and axle studs

    10. 0

      2zz idle / roughness when accelerating past 3k

×
×
  • Create New...

Forums


News


Membership