Full-Throttle

My '06 Toyota Aurion SX6 Sportivo

Recommended Posts

With a few more hours of daylight left, I decided it would be interesting to wrap one of my spare engine covers (and here I was thinking the center console was a challenge, haha). This is the finished result:


IMG_2194-1-resized.jpg


IMG_2197-1-resized.jpg


IMG_2200-1-resized.jpg


IMG_2210-1-resized.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Haha man... That looks mint. is the just one piece? how did you go around the egdes etc? decals?

Share this post


Link to post
Share on other sites

Haha man... That looks mint. is the just one piece? how did you go around the egdes etc? decals?

Yep, one piece :). Going around the lettering was a right bitch since you can't remove them, so I had to carefully cut around them with a Stanley knife and hope like hell I didn't slip :lol:. For the Toyota symbol I pried it off and stuck it back down with silicone afterwards. On the edges I had to cut slits in the vinyl and try to overlap as much as possible. I did have to use a few off cuts for any gaps left behind, but fortunately the carbon fibre pattern is very forgiving so it all blends nicely. Would love to do this with my white/black carbon fibre when it arrives next week, but think I'll buy another cover as there's no way I'm pulling all this off, haha.

  • Like 1

Share this post


Link to post
Share on other sites

OCD overload lol, but in a good way. This car is so tastefully modded. Love it.

Share this post


Link to post
Share on other sites

Haha thanks guys. Absolutely loving this car, and getting out for some nice drives in this sunny weather as we edge closer to Christmas ^_^

I may as well post these photos that I took today of my partner's 2004 Toyota Wish too :)

IMG_2256_7_8_tonemapped-1-resized.jpg
IMG_2265_6_7_tonemapped-1-resized.jpg
IMG_2253_4_5_tonemapped-1-resized.jpg
IMG_2277_8_9_tonemapped-1-resized.jpg

Share this post


Link to post
Share on other sites
Got a couple of upgrades done on the Aurion today :)


First thing was the installation of some Euro plate style license plate surrounds and the second was applying some pre-cut tint film to the lower sections of the tail lights.


Here's some photos of the process and some before vs after shots:


IMG_2472-resized.jpg


IMG_2434-resized_1.jpg


IMG_2436-resized.jpg


IMG_2439-resized_1.jpg


IMG_2441-resized.jpg


IMG_2445-resized.jpg


IMG_2450-resized.jpg


IMG_2443-resized.jpg


IMG_2465-resized.jpg


IMG_2466-resized.jpg

Share this post


Link to post
Share on other sites
I wasn't 100% happy with the new plate surrounds, so I decided to wrap the rear one in some gold carbon fiber wrap that I had left over. Seems to take the blandness off and makes it a little more interesting.


IMG_2490-resized.jpg


IMG_2491-resized.jpg


IMG_2492-resized.jpg

Share this post


Link to post
Share on other sites

A few small updates:

* 'V6 24VALVE' stickers fitted to the rear doors.

* Bought a 1:43 scale model of an Aurion (Asian Camry) from eBay.

* Received some Rays wheel nuts from Japan. Watch this space :wink:

IMG_2544-resized.jpg

IMG_2547-resized.jpg

IMG_2542-resized.jpg

IMG_2541-resized.jpg

IMG_2545-resized.jpg

IMG_2546-resized.jpg

IMG_2548-resized.jpg

IMG_2555-resized.jpg

IMG_2557-resized.jpg

IMG_2559-resized.jpg

IMG_2562-resized.jpg

IMG_2561-resized.jpg

IMG_2569-resized.jpg

IMG_2570-resized.jpg

Share this post


Link to post
Share on other sites

Hey Scott!, love the build so far mate, I have a question? I really do like the wood grain centre console that you had installed before the carbon fibre. I'm rather interested in doing the same for my TRD aurion. Is it a New Zealand only genuine part or have you wrapped it yourself? as i have not seen anything close to it on a Australian gsv40r. Cheers Matthew

Share this post


Link to post
Share on other sites
On 1/11/2016 at 0:42 AM, TRD #527 said:

Hey Scott!, love the build so far mate, I have a question? I really do like the wood grain centre console that you had installed before the carbon fibre. I'm rather interested in doing the same for my TRD aurion. Is it a New Zealand only genuine part or have you wrapped it yourself? as i have not seen anything close to it on a Australian gsv40r. Cheers Matthew

Hey Matthew! Thanks!! I got the centre console from a Touring model. It's the only type I've seen with the 'flat' looking woodgrain. Most others like the Grande/Presara have the glossy woodgrain, which I'm not really a fan of. I decided to go with the factory silver compartments to break things up a bit, but the woodgrain itself is a factory option, so you might have to hunt around a few wreckers and see if you can find one :smile:. I'm now using my carbon fibre wrapped console and I'd offer to sell you the woodgrain one, but I ended up using the woodgrain rear flip-open pocket as my original silver one had a couple of broken mounting tabs.

Share this post


Link to post
Share on other sites

So I decided it was time to upgrade my brakes, but I didn't need want to go for bigger calipers or larger rotors since my daily commute to work is only 10km and it's mostly straight, lol, so I settled on these Znoelli dimpled drilled and slotted rotors front and rear, combined with Bendix brake pads all round.

Znoelli is a New Zealand company who have been around for years making race brakes and custom wheel spacers/adapters, so when I managed to get a nice trade discount off the retail price I placed my order and 2-days later they were ready. Obviously after driving the car and applying the brakes the black coating on the face of the rotors comes off to expose the shiny silver underneath, but the rest of the rotor won't start looking crappy from surface rust etc after a while.

 

That's all for now, time to get back out there and burn some more brake pads :biggrin:

IMG_2578-resized.jpg
 
IMG_2579-resized.jpg
 
IMG_2580-resized.jpg
 
IMG_2585-resized.jpg
 
IMG_2586-resized.jpg
Edited by Full-Throttle

Share this post


Link to post
Share on other sites

The Aurion got some new wheels today. They're Vertini Magic (concave) 19x9.5 front and rear, +32 offset and wrapped in 235/35/19 rubber. They get custom drilled for the stud pattern and shaved for the offset you want so I had to wait about a week for them to get machined, but it was worth waiting for :smile:. Being concave they bow in the middle, giving that very dished effect.

The rear guards needed to be rolled as there was slight scrubbing around corners, but apart from that the fitment was pretty straight forward. I just have to get some camber bolts for the front so I can give it some negative camber and tuck the wheels in a bit more, but apart from that the fitment is great and I'm loving the new look :biggrin:

IMG_2629_tonemapped-1-resized.jpg

IMG_2630_tonemapped-1-resized.jpg

IMG_2626_tonemapped-1-resized.jpg

IMG_2621-1-resized.jpg

IMG_2633-1-resized.jpg

IMG_2639-1-resized.jpg

IMG_2643-1-resized.jpg

IMG_2647-1-resized.jpg

IMG_2597-resized.jpg

IMG_2605-1-resized.jpg

IMG_2650-resized.jpg

IMG_2651-resized.jpg

Edited by Full-Throttle
  • Like 2

Share this post


Link to post
Share on other sites
7 hours ago, trentmeyer23 said:

The style makes them look rather small.

They look pretty damn big in real-life mate :tongue:

Share this post


Link to post
Share on other sites

Threw some camber bolts in the front tonight. It's evened it out nicely now, so no more strange poke at the front.

12512822_10156371980250542_1836971891183

12417821_10156372536575542_2715944298985

  • Like 2

Share this post


Link to post
Share on other sites

You take some pretty good pics!

Share this post


Link to post
Share on other sites
On 1/25/2016 at 4:42 PM, Kanmuri79 said:

I don't think i've seen this much effort in such little time. Great work.

I don't think I've ever spent this much money in such little time! :laugh:. Thanks mate.

21 hours ago, GDude said:

You take some pretty good pics!

Cheers man! :happy:

  • Like 1

Share this post


Link to post
Share on other sites

Fitted some slightly larger tyres up front to fill up the guard gap a little better. Other benefit is that it brings the lip of the rim further away from potholes and is a bit more comfortable since you don't feel every dip and crack in the road. Fronts are 225/40/19 and the rears are 235/35/19. The old tyres are only a few weeks old, but the wheel-well gap was bugging the hell out of me, so for now I'm happy :)

IMG_2787_8_9_tonemapped-1-resized.jpg

IMG_2781_2_3_tonemapped1-resized.jpg

Share this post


Link to post
Share on other sites

I had been thinking of a way to fill the void in the engine bay where the factory intake used to be and ended up killing two birds with one stone by settling on this large oil catch tank. It's designed to catch blow-by oil from the PCV valve during full throttle and turns the vapor into a mist that settles in the bottom of the catch tank instead of getting sent back into the intake manifold.

Radium Engineering made a catch tank set-up for the Lotus Evora (which uses the same 2GR-FE engine) and owners have reported quite a lot of oil being caught, so they sound like they could be quite beneficial on this engine. I had one on the Corolla and it worked well, so I figured it'd be worth a shot in the Aurion. Ended up putting my factory silver engine cover back on at the same too, as I prefer the cleaner look compared to my carbon fiber wrapped cover (which I'll still keep to mix things up every now and then).

Will be interesting to see how much oil this thing collects :)

IMG_2836-resized.jpg

IMG_2841-resized.jpg

IMG_2837-resized.jpg

IMG_2842-1-resized.jpg

1.jpg

2.jpg

3.jpg

  • Like 2

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...