Jump to content


DVD player with 7" Screen Installed.

DKzr6

By DKzr6
in Aurion / TRD Aurion Club

 Share

Recommended Posts

Sanz Collaborator

Sanz

Posted
Posted
I senond that!!

I see in an Aussie VW forum people are playing around with their unit (which has exactly the same software as ours except it's made specifically to suit VW vehicles) and playing around with it to try and change the user interface and stuff. Worth checking out this forum, learnt a lot of stuff from there.

I strongly urge you to have a look:

http://www.golfmkv.com/forums/showthread.php?t=39584

Nice find!

There's a load of useful information there with what they've found, including changing the satellite navigation software from Route 66 to iGo/MIO.

Will have to spend a bit of time catching up with what they've posted.

Thanks,

bok

Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.
  • Replies 355
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

DKzr6
DKzr6

Takes approx 5 mins to pull the fascia out. There are no screws for the trim. Just Clips. You pull the top air vents forward. You pull up the centre console starting under the lid of the centre arm

Posted Images

Tmaster100 Proficient

Tmaster100

Posted
Posted
Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.

I could do with some help. I have a copy of IGO8 aand Aussie Maps but not sure if it's the right one. If it is how do i get this to work on the AVC?

Oh, radio reception issue resolved. It was an issue with two transposed pins on the supplied loom.

Sanz Collaborator

Sanz

Posted
Posted (edited)
Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.

I could do with some help. I have a copy of IGO8 aand Aussie Maps but not sure if it's the right one. If it is how do i get this to work on the AVC?

Oh, radio reception issue resolved. It was an issue with two transposed pins on the supplied loom.

Check your messages. Once you have the right version installed, it really is a peace of cake - trust me!

Edited by Sanz
BradJ Member

BradJ

Posted
Posted

JUst about to get zr6 aurion, thrilled to bits! Opted out of sat nav pack looking at this, seems great! Is ipod fully functional using this head unit?


Tmaster100 Proficient

Tmaster100

Posted
Posted
Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.

I could do with some help. I have a copy of IGO8 aand Aussie Maps but not sure if it's the right one. If it is how do i get this to work on the AVC?

Oh, radio reception issue resolved. It was an issue with two transposed pins on the supplied loom.

Check your messages. Once you have the right version installed, it really is a peace of cake - trust me!

All done. I'n now running IGO8, Finean and Route66 on the one SD Card. You don't happen to have an Australian language file for IGO8 do you?

fatsatman Collaborator

fatsatman

Posted
Posted
Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.

I could do with some help. I have a copy of IGO8 aand Aussie Maps but not sure if it's the right one. If it is how do i get this to work on the AVC?

Oh, radio reception issue resolved. It was an issue with two transposed pins on the supplied loom.

Check your messages. Once you have the right version installed, it really is a peace of cake - trust me!

All done. I'n now running IGO8, Finean and Route66 on the one SD Card. You don't happen to have an Australian language file for IGO8 do you?

i cant seem to find a version of igo8 that displays right and cant figure out how to get finean to see the maps,,

dont want to be a GIMME,,,

but can you upload the 3 in 1 contents of your SD ?

another software that i HAVE got working is McGuider ,,if anyones interested.

bok Enthusiast

bok

Posted
Posted

For those of us who don't yet have it, any suggestions on where to purchase Igo? Google is so far turning up nada (unless they OEM it under a different name that I can't find :) )

Cheers,

bok

bok Enthusiast

bok

Posted
Posted
Google IGO8 PNA. There are many sources for it online :whistling:

Well I was hoping to avoid that if possible :lol:

Tmaster100 Proficient

Tmaster100

Posted
Posted

I'm sorry but no-one is going to hand out the software to you. We all have spent days looking and downloading ourselves to get it working. It's all a frustrating but a learning excersize.

stephenp Explorer

stephenp

Posted
Posted
Yep!

I am currently running Finean V3 and Igo V8. Let me tell you, Igo is an awesome GPS software. I strongly urge you to install this prog on the unit. Route 66 was ok but I wasn't a huge fan of the graphics whereas Igo looks absolutely fantastic!

It's very easy to install other GPS software on this unit (I have 3 installed on the SD card in total), if anyone needs help let me know.

I could do with some help. I have a copy of IGO8 aand Aussie Maps but not sure if it's the right one. If it is how do i get this to work on the AVC?

Oh, radio reception issue resolved. It was an issue with two transposed pins on the supplied loom.

BlueAurionSX6,

May I know how do you resolve the weak reception problem, which pins and how? Otherwise will have to email Auspack.

Thanks,

bok Enthusiast

bok

Posted
Posted
I'm sorry but no-one is going to hand out the software to you. We all have spent days looking and downloading ourselves to get it working. It's all a frustrating but a learning excersize.

I wasn't asking you to? (unless you're talking to fatsatman?). The keyword in my original request was purchase, as in does anyone know of a local distributor? :lol:

bok

fatsatman Collaborator

fatsatman

Posted
Posted

well, its was worth a try,, :blink::rolleyes:

ive been going through hell for weeks now,,,trying everything ,with some help from sanz ive got to the point where it displays full screen(igo v 8 im talking about) and boots fine,,, but when you actually go to navigate to somewhere the screen goes blank and turns off,,, need to reboot to get it back...any ideas

FAT

Tmaster100 Proficient

Tmaster100

Posted
Posted
BlueAurionSX6,

May I know how do you resolve the weak reception problem, which pins and how? Otherwise will have to email Auspack.

Thanks,

My loom had the blue (antenna amplifer) and the cutoff grey/black wire pushed in the wrong way around. I simply looked at the service manual pages to workout the pinouts. I have been told by others that their looms were fine so i assume it was just an isolated case.

Sanz Collaborator

Sanz

Posted
Posted
well, its was worth a try,, :blink::rolleyes:

ive been going through hell for weeks now,,,trying everything ,with some help from sanz ive got to the point where it displays full screen(igo v 8 im talking about) and boots fine,,, but when you actually go to navigate to somewhere the screen goes blank and turns off,,, need to reboot to get it back...any ideas

FAT

I could upload the correct data and sys.txt file needed in order to get Igo working 100%. Problem is, its over 8mg. What's the easiest way to upload something? Megaupload? Rapidshare? (without it costing anything of course).

I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Tmaster100 Proficient

Tmaster100

Posted
Posted
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

fatsatman Collaborator

fatsatman

Posted
Posted
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

thanks mate,,

ill try again,,finished donwloading but was currupt.

fatsatman Collaborator

fatsatman

Posted
Posted
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

thanks mate,,

ill try again,,finished donwloading but was currupt.

can someone else confirm the file downloads incomplete?

bok Enthusiast

bok

Posted
Posted
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

Downloaded and unzipped fine here. Many many thanks!

Olywood Advancing

Olywood

Posted
Posted (edited)
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

Downloaded and unzipped fine here. Many many thanks!

Hi Guys,

Not sure if you can help however I have the Prado running V10 and it is really crap based on what i am used to...can this unity be upgraded to the Auspak one does anyone know?

Si

Edited by Olywood
fatsatman Collaborator

fatsatman

Posted
Posted
I would be willing to upload the whole Igo GPS program if someone can give me any suggestions? Then all you would obviously have to do is to transfer the file, as is, onto your SD card and away you go!

Here is a link - http://rapidshare.com/files/122782141/IGO8_PNA.zip.html (It should have the sys file configured for you already)

Now you need to find the Australian Maps file to go with it.

Downloaded and unzipped fine here. Many many thanks!

Hi Guys,

Not sure if you can help however I have the Prado running V10 and it is really crap based on what i am used to...can this unity be upgraded to the Auspak one does anyone know?

Si

Thanks Guys,,,

Lucky ive got a premo account,,

third time lucky and all working here.

Igo8 does appear to be pretty good so far.

Now to find a finean v3 that see's the maps,,

Cheeers

FAT

bok Enthusiast

bok

Posted
Posted
Hi Guys,

Not sure if you can help however I have the Prado running V10 and it is really crap based on what i am used to...can this unity be upgraded to the Auspak one does anyone know?

Si

Hi Olywood,

I'd say no, probably not. The AVC-6901 that we're talking about here is designed for the Aurion/Camry. However, Auspack does sell the same unit in generic double-din configurations (I believe it is the same unit, can't say for sure).

Your best bet would probably be to email Rob @ Auspack (see the website) and he'd be able to give you a definite answer.

bok

stephenp Explorer

stephenp

Posted
Posted
Hi Guys,

Not sure if you can help however I have the Prado running V10 and it is really crap based on what i am used to...can this unity be upgraded to the Auspak one does anyone know?

Si

Hi Olywood,

I'd say no, probably not. The AVC-6901 that we're talking about here is designed for the Aurion/Camry. However, Auspack does sell the same unit in generic double-din configurations (I believe it is the same unit, can't say for sure).

Your best bet would probably be to email Rob @ Auspack (see the website) and he'd be able to give you a definite answer.

bok

Hi Guys,

Can anyone share some lights here on how to get the file working? Which version of Australian map we can use? I downloaded the sensis R14 yesterday wonder it fit? I unzipped the downloaded IG08 file int he SD card and set it to read from that folder and the GPS said can't find content? What else did I miss?

Thanks

bok Enthusiast

bok

Posted
Posted
Is your seek buttons on the steering wheel working around the wrong way?

Finally went to use the seek buttons today - and they're backwards! My radio reception sounds alright though, but I think I'll double check the pins anyway. Did you end up with a resolution to the backwards buttons? If not I'll shoot an email through to Rob so there's more than one customer waiting on a fix.

bok

Tmaster100 Proficient

Tmaster100

Posted
Posted
Is your seek buttons on the steering wheel working around the wrong way?

Finally went to use the seek buttons today - and they're backwards! My radio reception sounds alright though, but I think I'll double check the pins anyway. Did you end up with a resolution to the backwards buttons? If not I'll shoot an email through to Rob so there's more than one customer waiting on a fix.

bok

No fix as of yet. Please do tell Rob asap that you have the same problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 1

      Tyre Sale Specials

      Tried to search prices on mycar website & nothing would load Tyroola also has 15% off site wide. Some good prices depending what your looking for https://www.tyroola.com.au/
      L4WL3SS in Club Lounge
    2. 0

      overheated engine

      I drive a 2010 series 200 sahara V8 automatic. I recently towed a small caravan on a not that hotter day. The temperature gauge went to about half then dropped back to normal. The motor then went into limp mode and eventually stopped. On lifting the bonnet i noticed the top radiator tank had split all the way across. I have only two months ago had the complete cooling system checked with no defects. I called the RAA in South Aust and they tried to start it but just turned over but did not fire up. It was still pretty hot. I have been told the motor would be ruined by overheating. The car has been sitting at the repairers for 5 days now and as far as i know it has not been attempted to start. Before putting a new motor in it would it be worth putting a new radiator in it and see if it will fire up? Open to any suggestions at this stage.
      wayne m in Landcruiser Club
    3. 1

      1996 Trueno XZ - Is it worth modding?

      Depends on how common/rare they are in your part of the world. The XZ trim was the second-lowest so didn't come with most of the fun bits that the full-fruit BZG/V/R models did, so it's not anywhere near as desirable stock but sometimes you have to make do with what you can find, plus you shouldn't feel as guilty modding the heck out of it since most of it isn't special.
      Hiro in Classic Toyota
    4. 62

      VSC, Traction Control, Check Engine lights all on

      I attended Toyota Preston for Aurion ATX 2013 major service today. Cost $~$1300. On the way home I stopped to pick up dinner. Two fault lights: engine and VSC lights came on when I restarted the car. Car drove home just fine. I can only return the car tomorrow for them to sort out. Annoyed. Let’s see if they’re still on in the morning.
      57John in Aurion / TRD Aurion Club
    5. 1

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    6. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    7. 1

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    8. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    9. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    10. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
×
×
  • Create New...

Forums

News

Membership