Jump to content

[Updated links now with pics] 2ZZGE-New Intake Manifold - Street version with Q45 Throttle body

Suprathai
 Share

Recommended Posts

Suprathai Grand Master

Suprathai

Posted
Posted

Click on the following for the thread

New Intake Manifold

Click on the following for the pics

Pics of the new Intake manifold, scroll down to post # 1466

No I am not adverstising, but I have been following it a little bit. The N/A crowd has been abit limited with bolt-ons for the 2zzge, Boosted over at NC has created a new intake manifold for the 2zzge the gains look very promising at the top end, especially 4300rpm onwards. So if we take into account that US dynos read high, we can expect around 10kw atw I suppose, if 23hp = 16kw. Looks good, will have to wait for independent dynos. Only problem is that you will need possibly a larger fuel pump and injectors, and please lets not turn this into a FI vs N/A debate!

Only bad thing is that apparantly this manifold is going to cost about $1200USD, converted to AUD is about $1700. Add the cost of shipping etc + tax and it blows it out of the waters to 2000. Unfortunately the price is going to deter alot of potential buyers, me included :angry: .


SILVERBACK Collaborator

SILVERBACK

Posted
Posted
Click on the following

New Intake Manifold

No I am not adverstising, but I have been following it a little bit. The N/A crowd has been abit limited with bolt-ons for the 2zzge, Boosted over at NC has created a new intake manifold for the 2zzge the gains look very promising at the top end, especially 4300rpm onwards. So if we take into account that US dynos read high, we can expect around 10kw atw I suppose, if 23hp = 16kw. Looks good, will have to wait for independent dynos. Only problem is that you will need possibly a larger fuel pump and injectors, and please lets not turn this into a FI vs N/A debate!

So whos keen on a USD1000 intake manifold?? Xoom?? Its another few more kw's up top, sure you could wind your boost up, but I'm sure another 20kw from the intake manifold would be nice.

Cheers Suprathai for the info.... Looks good.... Thanks for sharing mate

Suprathai Grand Master

Suprathai

Posted
  • Author
Posted

Thats the only problem with the exchange rate being so low at the moment. It works out to be around $1400 AUD not incl shipping.


xoom Grand Master

xoom

Posted
Posted

stop being a bunch of sooks and just fork out the cash to be the first one 2 have it :P :P :P :P ...... mate i dont need the extra 20kw she's a handful as it is ..... lol

u also might want to read all of that thread since just buying this is not all that u need

ported headers, PFC, fuel pump, injectors & t/b

chicaboo Grand Master

chicaboo

Posted
Posted
ported headers, PFC, fuel pump, injectors & t/b
...Stage 3 cams, engine mount inserts, 1.5way LSD, Toyo R888s. :P
SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted
I'm looking at injectors at the moment though, not sure about wanting to port the stock headers.

Why don't you want to port the stock headers??? You don't know what you are missing out on..... :P

Guni Grand Master

Guni

Posted
Posted
I'm looking at injectors at the moment though, not sure about wanting to port the stock headers.

Why don't you want to port the stock headers??? You don't know what you are missing out on..... :P

I'll have to agree with SB on that. Ported headers is one of the better bang for buck mod!!!!! Does its work on ther whole rev range. :lol: :lol: :lol: :lol: :lol: :lol:

I reckon it would costs about 2 grand with some change delivered. To top it off, have to work on injectors bla bla bla bla. For 20kw extra and the money that is spent on it, kebab performance is better bang for buck !!!!!!!!!!!!!!

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Appreciate the R&D though. Good job on their part.

Suprathai Grand Master

Suprathai

Posted
  • Author
Posted
I reckon it would costs about 2 grand with some change delivered. To top it off, have to work on injectors bla bla bla bla. For 20kw extra and the money that is spent on it, kebab performance is better bang for buck !!!!!!!!!!!!!!

Not to mentioned that I need to get it tuned as well, hence why I'm not so sure about porting the headers. It would make a difference if I stayed n/a, but... :D

  • 2 weeks later...
xoom Grand Master

xoom

Posted
Posted

well looks like the testing for this has come to the butt end of it and the claim is 30HP @ wheels on a stock ecu .... now minus the US corrections etc etc i'd say if its all correct ur looking @ a 15kw@w gain ..... now for $1000 USD - $1400 USD thats not 2 bad.

So come on fellas .... we need some independant AU testing ..... who is gonna step up 2 the plate ?

i am also looking @ all u PFC owners as this mod is perfectly suited for u ....... if all i hear is crickets then ur all soft :P :P :P :P :P

matt_glad Community Regular

matt_glad

Posted
Posted

I am currently getting together all the bits I need to build one, It cant be that hard, sure is cheeper than paying $1000 US!

Suprathai Grand Master

Suprathai

Posted
  • Author
Posted

Just checked out the post, and the damn 30hp at the wheels is insane, thats like another 20kw!!!

I'm waiting for a confirmation of fitment before I make a friggin move!!

Dav0 Proficient

Dav0

Posted
Posted
Just checked out the post, and the damn 30hp at the wheels is insane, thats like another 20kw!!!

I'm waiting for a confirmation of fitment before I make a friggin move!!

If you are going ahead with it, im keen aswell.. let me know

-JC- Veteran

-JC-

Posted
Posted
Just checked out the post, and the damn 30hp at the wheels is insane, thats like another 20kw!!!

I'm waiting for a confirmation of fitment before I make a friggin move!!

That would make two of us . . .

Almost have all the other pieces in place now :spiteful:

Suprathai Grand Master

Suprathai

Posted
  • Author
Posted

So I was wondering who is interested this new intake??

Its going to cost around $1800 or so shipped. Not sure on the price yet.

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted

Please stop saying it is a 30hp increase as you really need to take into account correction figures between here and the states as Bill has already mentioned. It would probably be more like 15-20 odd hp here in Aus.

For the price you have quoted i'm sure somewhere like Westside, CES and the like could do for the same money maybe even less. take them a pic and some measurements and see what they would charge.

Suprathai Grand Master

Suprathai

Posted
  • Author
Posted

I'm sure someone could get one made up, but is anyone keen on doing R&D?? Being in the R&D department at work, sometimes a minor difference in design translates to a big difference in performance.

I know that the guys in the US have dyno readings way higher then australia, but what I'm looking at is the difference between the numbers not the actual figure itself. So if the increase is 30hp, then its 22.35kw. So if they read 20% higher then it would be around 18.625kw or 25hp. Even then alot of other factors come into play, then again 3 more kw is not going to be that huge of a difference.

Bill is probably laughing at this right now, squabbling over little increase in power :rolleyes:

I suppose the only way that we will find out the actual gain is when finally someone gets there hands on it over here.

chicaboo Grand Master

chicaboo

Posted
Posted

Remember this IM has been designed for whatever cams are in the test engine (stock?). So if you go put some nice sexy Stage 2 Piper cams in, it all goes to wall, and you could actually lose power relative to the stock cams (maybe not across the whole rev range, but still...).

Gav.

xoom Grand Master

xoom

Posted
Posted
Bill is probably laughing at this right now, squabbling over little increase in power :rolleyes:

lol ..... yes i am ..... several clicks of the boost controller to the left nets the same results .... i.e. an increase in 30HP .... lol

but hey ..... i guess it all helps right

Northy Grand Master

Northy

Posted
Posted
Bill is probably laughing at this right now, squabbling over little increase in power :rolleyes:

lol ..... yes i am ..... several clicks of the boost controller to the left nets the same results .... i.e. an increase in 30HP .... lol

but hey ..... i guess it all helps right

only 30hp....such a tiny amount, not sure I would even notice :P

xoom Grand Master

xoom

Posted
Posted
Bill is probably laughing at this right now, squabbling over little increase in power :rolleyes:

lol ..... yes i am ..... several clicks of the boost controller to the left nets the same results .... i.e. an increase in 30HP .... lol

but hey ..... i guess it all helps right

only 30hp....such a tiny amount, not sure I would even notice :P

well i could push the happy button for a net of 80HP if that makes it any better for u north :P :P :P :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 0

      overheated engine

      I drive a 2010 series 200 sahara V8 automatic. I recently towed a small caravan on a not that hotter day. The temperature gauge went to about half then dropped back to normal. The motor then went into limp mode and eventually stopped. On lifting the bonnet i noticed the top radiator tank had split all the way across. I have only two months ago had the complete cooling system checked with no defects. I called the RAA in South Aust and they tried to start it but just turned over but did not fire up. It was still pretty hot. I have been told the motor would be ruined by overheating. The car has been sitting at the repairers for 5 days now and as far as i know it has not been attempted to start. Before putting a new motor in it would it be worth putting a new radiator in it and see if it will fire up? Open to any suggestions at this stage.
      wayne m in Landcruiser Club
    2. 1

      1996 Trueno XZ - Is it worth modding?

      Depends on how common/rare they are in your part of the world. The XZ trim was the second-lowest so didn't come with most of the fun bits that the full-fruit BZG/V/R models did, so it's not anywhere near as desirable stock but sometimes you have to make do with what you can find, plus you shouldn't feel as guilty modding the heck out of it since most of it isn't special.
      Hiro in Classic Toyota
    3. 62

      VSC, Traction Control, Check Engine lights all on

      I attended Toyota Preston for Aurion ATX 2013 major service today. Cost $~$1300. On the way home I stopped to pick up dinner. Two fault lights: engine and VSC lights came on when I restarted the car. Car drove home just fine. I can only return the car tomorrow for them to sort out. Annoyed. Let’s see if they’re still on in the morning.
      57John in Aurion / TRD Aurion Club
    4. 1

      1996 Trueno XZ - Is it worth modding?

      Hi everyone, new member to the group and owner driver of a nifty little Toyota Sprinter Trueno XZ, now this was my cousins car, I bought it off him and after various drives, I have come to the decision that this needs alot of love. Now I am wondering if its worth putting my time and money into doing this certain make n model up or should I just buy a different car to do up? I am not very car-inclined so I really don't know a lot. Any opinions would be very helpful Thankful!
      Danimal in Classic Toyota
    5. 1

      Query about the correct rotors for 2006 ACV40 Camry.

      I did a Google search. RDA 8112 suits your vehicle: TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Auto 4dr Sedan FWD [06/06 – 09/11] TOYOTA CAMRY ACV40R 2.4L 2AZ-FE DOHC 16v MPFI 4cyl 117kW 5sp Man 4dr Sedan FWD [06/06 – 09/11] RDA 8112 Specifications: Specifications: Centre Hole Diameter: 62mm Flange Diameter: 62mm Minimum Thickness: 25mm Type: Vented Height: 49.2mm Diameter: 296mm Item Type: Disc Brake Rotor Material Type: Cast Iron Thickness: 28mm Pack Qty: Pair Stud Holes: 5 Position: Front RDA7686 RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Type DISC BRAKE ROTOR Brand RDA BRAKES Unit of Measure EACH Description RDA Brake Rotor 296mm x 26 Min (151mm Outer Hat Dia) Warranty 12 Months 20000kms Centre Hole Diameter 62mm Minimum Thickness 26mm Type Vented Note 151mm Outer Hat Diameter | (Use RDA8112 for 155mm) Height 50mm Diameter 296mm Item Type Disc Brake Rotor Thickness 28mm Number of Stud Holes 5 Position Front Brake Disc Type Vented Brake Disc Thickness 28 Centering Diameter 62
      campbeam in Camry Club
    6. 0

      Tyre Sale Specials

      I have been waiting and hoping for this Black Friday sale special to appear for 2024. 50% off all Pirelli Tyres. Main qualifying sale condition is: "Offer Tyres must be booked on Friday 29 November 2024 and be fitted between Monday 6 January 2025 and Saturday 15 February 2025." https://www.mycar.com.au/blackfriday?gad_source=1&gclid=Cj0KCQiAuou6BhDhARIsAIfgrn6ZbAnmv-FBFyT5UjZ5s9kCnKFSoMQLrVk3KXff7IqWPqq56qzU7oMaAr-eEALw_wcB&gclsrc=aw.ds
      campbeam in Club Lounge
    7. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    8. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    9. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    10. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
×
×
  • Create New...

Forums

News

Membership