Jump to content


Aurion Fuel Help

Anarcher217

By Anarcher217
in Aurion / TRD Aurion Club

 Share

Recommended Posts


Buff Hamster Grand Master

Buff Hamster

Posted
Posted

If you have questions from now on look here first then ask questions if it isn't there.

http://au.toyotaownersclub.com/forums/index.php?showtopic=19545

You can use E10 but you will use more fuel. IMO i prefer to use 95 or 98 octane petrol.

With Shell V-Power petrol i my fuel ecc is 10.3L/100km and this is 95% city and 5% freeway. This is reving up to 3k RPM.

Currently i'm trying reving at 4k RPM and seeing if there is any difference.

DJKOR Grand Master

DJKOR

Posted
Posted

Have you ever fuelled up your Aurion before?

Next time you open the fuel tank cover, come back here and post what the sticker says behind the fuel filler door.

SCOOTA44 Grand Master

SCOOTA44

Posted
Posted

All the caltex service stations down here are dropping 95 premium and putting in 98 premium.


Adamsy Grand Master

Adamsy

Posted
Posted

All the caltex service stations down here are dropping 95 premium and putting in 98 premium.

yeah there doing the same up this end of the state too with the making the switch to 98 premium, still a bit hesitant to use it though, seems to be a dodgy Caltex servo tend to here a few dodgy stories about it so I’m happy to stay with BP ultimate, It's a mates parents servo so i know its always busy and fuel gets refilled regularly and they keep diesel 91, 95 Premium and 98 Ultimate so can always go back to 95 if ultimate gets to a stupid price again.

450HP/tonne Mentor

450HP/tonne

Posted
Posted

I know it is unheard of, but the owners manual contains information on the subject.

Anyway, I'm sticking with 98 (I did some testing that showed 95 as the best $/km, with 98 only marginally behind, whilst 91 was the most expensive per km. I have not used E10 because, in my humble opinion, it's the devil).

httttt Grand Master

httttt

Posted
Posted

Just reinforcing what everyone else has said...

E10 is "suitable" for the car but you will take a noticeable performance hit and you will get less Ks per fill.

In my experience while using E10, the ECU retards something and makes the engine less responsive and creates a slight dull pinging noise while idling or after a squirt.

Spillzee Community Regular

Spillzee

Posted
Posted

Just reinforcing what everyone else has said...

E10 is "suitable" for the car but you will take a noticeable performance hit and you will get less Ks per fill.

In my experience while using E10, the ECU retards something and makes the engine less responsive and creates a slight dull pinging noise while idling or after a squirt.

your correct. tests have proven 98 octane fuel lowers emitions, and fuel consumtion based on energy needs/loads on motor per km.. havin said that... depends on what you motor is tuned for.

Ronnyboy Grand Master

Ronnyboy

Posted
Posted

Im getting tired reading about Fuel :( LOL

You can use any exept for Diesel and GAS. But if it was my presara id use either 95 or 98........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 8

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    2. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    3. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    4. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
    5. 0

      Camry Touring 2010 A/C Issues.

      Hi Guys, My Camry 2010 Touring just had a regas done on it and the next day for some reason it wasn't blowing cold air but the next day it is now working with nice cold air BUT every now and then we can hear and feel a like a buzz for a few secounds and today while my sister took my I could her like a mild knock sound when stopped but goes away when driving. Any idea what this could be and the A/C is always working now for now.
      Aussie Camry in Camry Club
    6. 6

      My Toys & Collectables

      Friday the 13th added
      L4WL3SS in Club Lounge
    7. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    8. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    9. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    10. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
×
×
  • Create New...

Forums

News

Membership