Jump to content


New tyres for my Aurion -options

Silver-Aurion
 Share

Recommended Posts

Silver-Aurion Grand Master

Silver-Aurion

Posted
Posted

So the tyres on my aurion are still from factory and I've done 72K on them. It's time for new tyres. What are the best options for 16" wheels on my prodigy? When it comes to tyres I know absolutely NOTHING about them. I don't even know how much they should cost for a decent everyday tyre.

So prices, suggestions on brands etc would help me so much.

thanks :)

Pah Grand Master

Pah

Posted
Posted

Maybe stick to the same brand you have if your not going to aftermarket wheels, 72k from the originals is pretty good :yahoo:


adventurer007 Community Regular

adventurer007

Posted
Posted

How on earth did you do 72K on those Dunlop 300E ?

I gave them up at 40K when they slip around in the wet too much.

I use Michelin Primacy now.

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

How on earth did you do 72K on those Dunlop 300E ?

I gave them up at 40K when they slip around in the wet too much.

I use Michelin Primacy now.

These dunlops are pretty damn hard. I bet I can push these tyres to 80k easily. They still have decent tread on all of them.

But I want to get rid of them anyway. They're 'close' to being finished but more so like you said these tyres in the wet are the worst. They lose all grip and they really do have that feeling that they slip when the roads are wet or it's raining.

Thanks everyone for the suggestions. Will look into them all :).

tekkyy Mentor

tekkyy

Posted
Posted

Wow. What do you mean you can push it to 80K?

How many mm you had left at 72K?

My factory Dunlop 300E didn't last long.

It hit the indicator on one of the front tyres at 15K odo.

I changed to Bridgestone Potenza RE001.

Hmm. Could it be that harder tyres have better mileage on smooth roads?

Yet somehow worse mileage on bumpy roads?

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

Wow. What do you mean you can push it to 80K?

How many mm you had left at 72K?

My factory Dunlop 300E didn't last long.

It hit the indicator on one of the front tyres at 15K odo.

I changed to Bridgestone Potenza RE001.

Hmm. Could it be that harder tyres have better mileage on smooth roads?

Yet somehow worse mileage on bumpy roads?

No idea but I'll take a picture of them today and post up.

mmm_sx6 Community Regular

mmm_sx6

Posted
Posted (edited)

If you've bought your car second hand is there any way of knowing if the tyres have been changed? Do they normally make a note of it in the logbook? because i had a quick flick through and couldn't find mention of the tyres being changed. Its currently at 82k and id bought it when it had done 35K

Edited by mmm_sx6
DJKOR Grand Master

DJKOR

Posted
Posted

It typically won't be recorded in the logbook by anyone unless the owner likes to stick all their receipts in there.

Three things that are a sure sign that the tires have been changed:

1) The brand/type of tire is not the usual (Energy MXV8 for the Sportivo)

2) The km's are qutie high and the tires are in a surprisingly good condition.

3) The manufacture date stamped on the tire is after the car was manufactured.

trentmeyer23 Grand Master

trentmeyer23

Posted
Posted

It typically won't be recorded in the logbook by anyone unless the owner likes to stick all their receipts in there.

Three things that are a sure sign that the tires have been changed:

1) The brand/type of tire is not the usual (Energy MXV8 for the Sportivo)

2) The km's are qutie high and the tires are in a surprisingly good condition.

3) The manufacture date stamped on the tire is after the car was manufactured.

For those who don't know, it is a 4 digit number such as 0410. The first 2 digits represent the week and the second 2 represent the year, so in this case it is week 4 of 2010.

Silver-Aurion Grand Master

Silver-Aurion

Posted
  • Author
Posted

Sorry guys, haven't been able to look at the tyres today. Been one busy as day. Will try to get all the details and pictures up today. If not sorry again lol

  • 4 weeks later...
mmm_sx6 Community Regular

mmm_sx6

Posted
Posted

Had a look and my date stamp on the tyres were around the time of the build date of the car, so that means with the factory michelins, ive 85 000kms out of them, which is pretty dam good. Might go with them, although the grip isnt the best.

mmm_sx6 Community Regular

mmm_sx6

Posted
Posted

Wow. What do you mean you can push it to 80K?

How many mm you had left at 72K?

My factory Dunlop 300E didn't last long.

It hit the indicator on one of the front tyres at 15K odo.

I changed to Bridgestone Potenza RE001.

Hmm. Could it be that harder tyres have better mileage on smooth roads?

Yet somehow worse mileage on bumpy roads?

Hey tekky, how did you find the RE001s? any idea how long they lasted you? or if you're still using them, how many k's have you done on them, and how much wear have they taken?

trentmeyer23 Grand Master

trentmeyer23

Posted
Posted

We got a set of Kumho KU23 in 17's the other week and I am pretty impressed.

Adamsy Grand Master

Adamsy

Posted
Posted

Kumho really are a fantastic value for money tyre these days, KU19's and 30's have fantasic performance for the coin!

tekkyy Mentor

tekkyy

Posted
Posted

Hey tekky, how did you find the RE001s? any idea how long they lasted you? or if you're still using them, how many k's have you done on them, and how much wear have they taken?

With the cheap tool I got off ebay I measure total thread depth and depth til wear indicator and store it in excel.

But I haven't measured for a while.

I think it was wearing quite slowly. But I aim for a more gentle commute to work.

It lost like 1mm of 6mm for 10,000 kms. But its probably not linear.

At the 36month service the tires were rotated against my noted wish.

I'll try to remember to measure them again. I have OEM for the boot so they couldn't have involved that in the rotation.

trentmeyer23 Grand Master

trentmeyer23

Posted
Posted

Kumho really are a fantastic value for money tyre these days, KU19's and 30's have fantasic performance for the coin!

Spot on, I also have Kumho KU31's on my Camry.

mmm_sx6 Community Regular

mmm_sx6

Posted
Posted

Hey tekky, how did you find the RE001s? any idea how long they lasted you? or if you're still using them, how many k's have you done on them, and how much wear have they taken?

With the cheap tool I got off ebay I measure total thread depth and depth til wear indicator and store it in excel.

But I haven't measured for a while.

I think it was wearing quite slowly. But I aim for a more gentle commute to work.

It lost like 1mm of 6mm for 10,000 kms. But its probably not linear.

At the 36month service the tires were rotated against my noted wish.

I'll try to remember to measure them again. I have OEM for the boot so they couldn't have involved that in the rotation.

Awesome, yeah i did abit of research aswell and for now, im going to stick with michelins, going for the primacy lc, which have got extremely good reviews online, might try them out, i can get them for $185/tyre, which seams alright

Funny that, My tyres were rotated againt my wish aswell..

lulchul Collaborator

lulchul

Posted
Posted

Awesome, yeah i did abit of research aswell and for now, im going to stick with michelins, going for the primacy lc, which have got extremely good reviews online, might try them out, i can get them for $185/tyre, which seams alright

Funny that, My tyres were rotated againt my wish aswell..

Seen a few reviews of the Primacy LC having poor to bad performance in the wet, did you see those reviews?

I too will be looking for replacement for my 16" Prodigy soon, however I'll absolutely be wanting to change from the stock 215 width to 225, and todo so believe I need to reduce my profile from 60 to 55 - I'm fine with that. Worth the extra 10mm of width on the road!

mmm_sx6 Community Regular

mmm_sx6

Posted
Posted (edited)

Awesome, yeah i did abit of research aswell and for now, im going to stick with michelins, going for the primacy lc, which have got extremely good reviews online, might try them out, i can get them for $185/tyre, which seams alright

Funny that, My tyres were rotated againt my wish aswell..

Seen a few reviews of the Primacy LC having poor to bad performance in the wet, did you see those reviews?

I too will be looking for replacement for my 16" Prodigy soon, however I'll absolutely be wanting to change from the stock 215 width to 225, and todo so believe I need to reduce my profile from 60 to 55 - I'm fine with that. Worth the extra 10mm of width on the road!

Thanks the heads up, wet weather grip was a big factor for me... back to the drawing board... trying to find one for about 180/tyre might ask around for those kumho's.

Edit: Was reading up about the KU31s which have really good reviews! but one thing i noticed in a few of the con sections was "bad rim protection"... what exactly does that mean?

Edited by mmm_sx6
tekkyy Mentor

tekkyy

Posted
Posted

Funny that, My tyres were rotated againt my wish aswell..

I don't want to rotate not just because I want to keep track of mileage.

I also want to be keep track of wear, punctures, etc.

The whole tyre rotation thing is a bit contraversial anyway.

Rotation pattern for cornering safety, braking safety, asymmetric tyres, mileage...

I rather not rotate and just change them in pairs.

tekkyy Mentor

tekkyy

Posted
Posted

Hey tekky, how did you find the RE001s? any idea how long they lasted you? or if you're still using them, how many k's have you done on them, and how much wear have they taken?

OK back to this.

I measured today.

See if you can make sense of it.

total/indicator

14,440km

front new

front right 7.3/5.6

17,000km

front right 6.8/6.0

23,000km

front right 6.4/5.1

25,100km

front new

rear left 5.8/4.8

rear right 6.0/5.6

44,000km

rotated

front left 4.6/3.6

front right 5.2/4.6

rear left 4.3/3.6

rear right 5.2/4.3

tekkyy Mentor

tekkyy

Posted
Posted

im going to stick with michelins, going for the primacy lc, which have got extremely good reviews online, might try them out, i can get them for $185/tyre, which seams alright

Seen a few reviews of the Primacy LC having poor to bad performance in the wet, did you see those reviews?

Thanks the heads up, wet weather grip was a big factor for me... back to the drawing board... trying to find one for about 180/tyre might ask around for those kumho's.

Start fresh.

Set your budget.

Rank the following. Wet, dry, mileage, noise, and comfort.

At about $150 I see Kumho Solus KH15 for wet and Bridgestone Potenza RE001 for dry.

I had the Kumho Solus KH15 before on Camry.

Noisy compared to stock Michelin Vivacy. Only 18,000km mileage in the front.

But has AA wet traction rating.

Choice tyre comparison also had it doing well in the wet.

Bridgestone Potenza RE001 is great in the dry.

By my extrapolation about 40,000km mileage in the front.

Buff Hamster Grand Master

Buff Hamster

Posted
Posted

Funny that, My tyres were rotated againt my wish aswell..

I don't want to rotate not just because I want to keep track of mileage.

I also want to be keep track of wear, punctures, etc.

The whole tyre rotation thing is a bit contraversial anyway.

Rotation pattern for cornering safety, braking safety, asymmetric tyres, mileage...

I rather not rotate and just change them in pairs.

Well for me i get free rotation and wheel alignment every 5000km. :yahoo:

I rotate my tyres because i know i will get even wear on all 4 tyres so when the time comes i can change all 4 tyres and not only 2.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 10

      Android auto

      OK. Does any of Toyota's advertising material mention Android Auto? If so then kick up a stink, with Toyota management, about misrepresentation and false advertising, reminding them of the hefty fines. Herb
      ozieagle in RAV4 Club
    2. 0

      E160 Corolla fielder suspension

      Does any one know if the trd sportivo suspension for the 2017 facelift corolla fielder fits the 2013 prefacelift version? Is the chassis the same? Thanks for the help.
      jay886 in Corolla / Corolla Sportivo Club
    3. 0

      Remote start

      What bipass do i need for immobilliser to install a remote start to my 2021 hiace
      chris mc1 in Audio/Video/Electronics
    4. 1

      1999 Camry Driver's door locking hatch issue

      It's possible that it could be something fouling or dirt build up, dry, or a broken mechanism, so have a look and give the mechanism some lubrication, most likely though, it'll be the actuator. I found one for a good price on Ebay, $25 delivered: Front Door Lock Actuator Right Side For Toyota Camry 1997-2001 | eBay
      Monad in Camry Club
    5. 0

      Query about the correct rotors for 2006 ACV40 Camry.

      Hi, I'm looking at a set of front rotors for an ACV40 2006, 2.4L Camry. I got a good price on some RDA's at Sparesbox. However both RDA8112 and RDA7686 show as for my car and I'm wondering what the difference is and if there were changes to the rotors during the model production. So does anyone know which rotor is the correct one? Many thanks in advance.
      Monad in Camry Club
    6. 10

      Android auto

      It's a simple solution though? Already laying down 60k for a RAV4, so what's another 1k on a phone to make everything work seamlessly? 👍
      L4WL3SS in RAV4 Club
    7. 10

      Android auto

      Your solution is akin to suggesting that switching to a different car manufacturer would resolve the issue. However, not everyone shares the same enthusiasm for using an iPhone as you do.
      Equi28 in RAV4 Club
    8. 1

      Turboed Corolla Overbuilt?

      that engine will be fine, the rods are the main thing to be concerned about. The 2860 is a decent turbo for the 1zz but in this day and age I'd go for a G25-550. The injectors might be on the small side, we run DW1000's. You need a full length injector, the shorter injectors with adaptors like ID1050x dont fit the 1zz head. You don't need an aftermarket intake manifold, if you do go down that path, avoid the CNC innovations unit, it's garbage. Do the boost control with a MAC valve and control it with the aftermarket ECU of your choice, I use Link stuff on most of my builds with the G4x Storm as the minimum. I also wire a fuel pressure sensor and oil pressure sensor to the ECU in my installs. Use a decent intercooler, the better cores (ARE, PWR, Garrett, Vibrant, Plazmaman, Hypertune) work a lot better than the chinese stuff like Aeroflow. a 450x250-300 fits fairly well with custom end tanks to route the cooler pipes through next to the radiator Don't forget about the clutch and gearbox. These days I like the Uniclutch twinplate, Above 300whp you'll want to think about upgrading the 3rd and 4th gears in the box also with the SSC (Hollinger) gear set and install an LSD of your choice. If you're going to give it a hard time, you'll also want an oil cooler. I like the HKS thermostat type sandwich plates and setrab or mocal oil coolers with -10 speedflow fittings/lines (Chinese AN fittings neck down to a lot smaller internal diameter in their bends, not great for flow) You'll also want to think about brakes, Celica or Sportivo front calipers will bolt on with sportivo discs as a starting point. To have somewhere like Tunehouse do the work you'll want to budget somewhere between 20-40K
      CHA54 in Corolla / Corolla Sportivo Club
    9. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      I did the mathematics myself regarding costs vs benefits for fuel injector cleaner. I have changed from 91ULP to 95PULP and 98PULP. Price difference can be about 13 -20 cents. Compared to 91ULP, Premium quality fuel should have a better quality additive package designed to have superior engine cleaning capabilities so the engine can perform at their best.
      campbeam in Camry Club
    10. 3

      Camry Touring 2010 Fuel consumption 15.2L/100km. Normal?

      "Fuel injector cleaner is a waste of money" Only if you by the cheap crap if you use LiquMolly a German Product it does work and you won't waste your Money.
      Aussie Camry in Camry Club
×
×
  • Create New...

Forums

News

Membership