has anyone turboed the izzfe engine

[ralyrt]

hi guys im new to this forum,

as the topic says.......

i dont own are corolla but i do owner a 1zz turboed car

i would tolike compare any turbo setup with my setup

plz i dont want people saying i going turbo.

ive you've done it or you havent

thanks guys

[SuiCid3]

I got a mate that has a white turbo'd Levin.

Haven't seen him in a few years though, so don't know much about it at all...

[Guest]

I'm going to but haven't yet.

You will find a few that have here:

Spyderchat

9th Gen corolla

VVTI . Net

and finally here:

VVT-I .Net

There have been some incredibly helpful people on all of the above sites (and this one) discussing their turbo setups.

I'd love to know a bit more about your car if your willing to share....

[ralyrt]

i already no those sites but i was after someone in oz land, cause the american dynoes always read high

by the way i got are mrs spyder, s15 t28, intercoler, 410cc injec, airfilter, 3inch and power fc and brass button clutch , its ll custom made

[shaohaok]

i already no those sites but i was after someone in oz land, cause the american dynoes always read high

by the way i got are mrs spyder, s15 t28, intercoler, 410cc injec, airfilter, 3inch and power fc and brass button clutch , its ll custom made

are u still running the sequential 6speed?

[CHA54]

http://www.rollaclub.com/board/index.php?showtopic=5193

[CORZZA]

dont no any here! but there are a few in south africa!

[ralyrt]

nah its are 5 speed manual

is rolla club an aussie forum ?

im sure these plenty in s.a but theres plenty in the usa

but hardly any in oz land

thats y i went custom everything

cheers

Edited January 3, 2006 by ralyrt

[negatron]

nah its are 5 speed manual

is rolla club an aussie forum ?

im sure these plenty in s.a but theres plenty in the usa

but hardly any in oz land

thats y i went custom everything

cheers

http://www.prostreetonline.com/buy/turbo_s...bo_kits/tc2502/

This seems cheap for a turbo kit, I'm wondering about the 1.6 bit tho?

[Pippy]

nah its are 5 speed manual

did you put a new box in?

or is your spyder an import? coz the MR-S released in Australia never came out in 5-spd

just wondering....

[ralyrt]

nah its are 5 speed manual

did you put a new box in?

or is your spyder an import? coz the MR-S released in Australia never came out in 5-spd

just wondering....

its an import

that why i said mrs not mr2 but yeah

[Guest]

So your MRS is obviously not a street car since it couldn't legally be registered......

any other mods?

[ralyrt]

yeah its registered

ive done every mod u can think off

only thing i have done is the brakes, theres no need, there that good

Edited January 4, 2006 by ralyrt

[oz_viking]

Why stop at turbo, when you can do this ?

[DANZZT231]

show us a pic of your MRS!

[CORZZA]

Why stop at turbo, when you can do this ?

Look at least with a turbo you can keep 4wheels on the road! Damn that thing must fly! :o

[shaohaok]

check out that REAL rear member brace

[CHA54]

http://www.spyderchat.com/phpBB/viewtopic....der=asc&start=0

[Mintos]

http://www.spyderchat.com/phpBB/viewtopic....der=asc&start=0

Hmmm i am not one to normally be critical of such a thing, but mate, i would definitely have done a few things differently.

* The wheels - that is rice to the max and you said they scrub at full lock, not cool, go 17s and get some decent rubber on there.

* Manifold - I hope you dont plant on keeping this car for long because under boost with stock internals that steel is going to crack and burn like a mofo.

* Lasty and most importantly, ECU - how can you wack on a turbo without even changing from factory ECU? That is the first thing you should do, to make sure your internals dont get nailed trying to adjust to the turbo via the standard ECU, get that Mircotech in there quick smart mate.

The MR2 is a nice car with lots of potential, be smart and careful about it before you reach for the wallet i say, other than that, nice car :)

[SILVABULLIT]

Surely you could use a better ECU than Microrubbish.... I mean microtech???

[CHA54]

Hmmm i am not one to normally be critical of such a thing, but mate, i would definitely have done a few things differently.

* The wheels - that is rice to the max and you said they scrub at full lock, not cool, go 17s and get some decent rubber on there.

* Manifold - I hope you dont plant on keeping this car for long because under boost with stock internals that steel is going to crack and burn like a mofo.

* Lasty and most importantly, ECU - how can you wack on a turbo without even changing from factory ECU? That is the first thing you should do, to make sure your internals dont get nailed trying to adjust to the turbo via the standard ECU, get that Mircotech in there quick smart mate.

The MR2 is a nice car with lots of potential, be smart and careful about it before you reach for the wallet i say, other than that, nice car :)

Looks like a steampipe manifold to me, if it's braced properly it's not likely to crack in the short term if the welds have decent penetration. It would be more durable than a stainless manifold.

The car actually runs a powerfc if you did a little research, as if you'd put a microtech on a 1zz...

[SILVABULLIT]

Hmmm i am not one to normally be critical of such a thing, but mate, i would definitely have done a few things differently.

* The wheels - that is rice to the max and you said they scrub at full lock, not cool, go 17s and get some decent rubber on there.

* Manifold - I hope you dont plant on keeping this car for long because under boost with stock internals that steel is going to crack and burn like a mofo.

* Lasty and most importantly, ECU - how can you wack on a turbo without even changing from factory ECU? That is the first thing you should do, to make sure your internals dont get nailed trying to adjust to the turbo via the standard ECU, get that Mircotech in there quick smart mate.

The MR2 is a nice car with lots of potential, be smart and careful about it before you reach for the wallet i say, other than that, nice car :)

Looks like a steampipe manifold to me, if it's braced properly it's not likely to crack in the short term if the welds have decent penetration. It would be more durable than a stainless manifold.

The car actually runs a powerfc if you did a little research, as if you'd put a microtech on a 1zz...

:D :D :D :D

[ralyrt]

mainfold is made from steam pipe 3mm thick, so its very stong

car run are power fc, i was going to get the microtec but i had to w8 3 weeks so i said stuff w8n and got the power fc

well yeah thats the car, thanks for postn the link...rollamods

and mintos wat the hell you going on about, u surely done no anything about the izzfe.

intercooler got installed yesterday dynoing the car today so hopefully well have are figure this afernoon

cheers

[DANZZT231]

Hey that's some sizzling colour!

[Hsien]

yeah its registered

ive done every mod u can think off

only thing i have done is the brakes, theres no need, there that good

Whats the difference between the MRS and the australian MR2??