Jump to content


Sell the rollas! Get this instead!

negatron
 Share

Recommended Posts
Buddha Grand Master

Buddha

Posted
Posted

That would have to be the best looking kit car I've ever seen! :rolleyes:


CAP Grand Master

CAP

Posted
Posted
It still looks like an MR2...have a look at the picture second from the bottom on the left...unmistakeable...

Still one of the best ones I've seen though, I'd like to see a front on shot and rear shot, because what makes a Ferrari unmistakable is the W I D E look they have. I don't think the MR2 shell would have the width to really pull it off.

But all the same looks cool! :)

negatron Grand Master

negatron

Posted
  • Author
Posted
It still looks like an MR2...have a look at the picture second from the bottom on the left...unmistakeable...

Still one of the best ones I've seen though, I'd like to see a front on shot and rear shot, because what makes a Ferrari unmistakable is the W I D E look they have. I don't think the MR2 shell would have the width to really pull it off.

But all the same looks cool! :)

Well, when/if i see that in the streets i won't think "hey, thats the most done up mr2 i've ever seen." I'll be thinking, "hey, thats the smallest Ferrari I've ever seen."

Then i'd go and kick it in the tyres.

DANZZT231 Grand Master

DANZZT231

Posted
Posted

It still look cool nonetheless. Besides, if you fly by chappel with that, most people would've think that's a Ferrari. Then again, if that car has 3S-GTE, it would be even better, but won't be as sizzling hot as the Ferrari engine.

Danthuyer Grand Master

Danthuyer

Posted
Posted

WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

"RuNx" Grand Master

"RuNx"

Posted
Posted

the gt porche kit looks great on the MRS too!!! it actually looks more like the porche than the MR2 looks like a ferrari......sorry but i cant find a pic anywhere on the net atm!!! :rolleyes:

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted

thats **** hot.

i know at the end of the day its just and mr2 but look at the whole cost diff.

i wouldnt knock it back i know that.

its definatly a poor mans ferrari.lol :D

i want 1

eddy_torrezz Grand Master

eddy_torrezz

Posted
Posted
WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

yeah i still reckon the mr2 looks heaps better

Bobjones Collaborator

Bobjones

Posted
Posted

Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

negatron Grand Master

negatron

Posted
  • Author
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

Hey Silva, what engine would you throw into a Porsched up bettle? I remember someone did a beetle with an old 911 engine in there (but he didn't bother with the kit) kinda cheating as its pretty much an engine, running gear and sitting on top of that a pair of racing seats and a beetle shell. But scary fast!

negatron Grand Master

negatron

Posted
  • Author
Posted
Wow very very nice, just hope that the engine performance matches the looks.

It says the engine is 275 BHP, thats a decent amount of power!

http://members.optusnet.com.au/borboyous/index.htm

The body kit itself costs $9300! And that's just unpainted panels!

Main Kit $9300

Rear Lights (replicas) $465

Front Lights $120

Hub Extensions (spacers) $630

Badges (original only) $430

100% Replica 355 Wheels $2800

Tyres $1175

TOTAL $14920

15 grand on top of the mr2 price to make it look like that, and you'd still need to add on painting, the interior (another 4ish grand) and the H gear thingy anoher 400ish. Damned this is an expensive exercise.

And wow the ebay one has gone up to 21k and still reserve not met!

Buddha Grand Master

Buddha

Posted
Posted

Just had another look at that ad ... it says it has a 2,000 litre engine! :blink:

If that's the case, you wouldn't be looking for much extra power! B)

Can anyone say "cramped engine bay"? :lol:

BigBum Grand Master

BigBum

Posted
Posted

That thing is nutz yo! There's a Mitsubishi GTO lurking around my area with a Ferrari bodykit on it as well. Frickin awesomeeeee dog~ :D

BigBum Grand Master

BigBum

Posted
Posted
WOW!!!

Looks hot.

Has anyone else seen the Acura NSX that gets the full F50 replica bodykit?

lemme find the link........... HERE IT IS WARNING - over 100 pictures....dialup killer!

It looked better before in red than it did after in black!!! :P :P :P

gOODbOYz Grand Master

gOODbOYz

Posted
Posted

damn that MR2 looks shexc with that kit.. ill drive that even if ppl know its fake and laugh at me.. but im sure the chicks will b digging the hell out of it :lol::rolleyes: :o

SILVABULLIT Grand Master

SILVABULLIT

Posted
Posted
Anyone got a link of those VW's being kitted out like a Porsche...same thing...show without the go...

The 3S-GTE engine is nice, atleast its cheaper to service than a N/A V12...

Bob that's because most don't know how to make a VW go....And I do ;)

So I could get the go to match the looks(without a turbo ;) )

Hey Silva, what engine would you throw into a Porsched up bettle? I remember someone did a beetle with an old 911 engine in there (but he didn't bother with the kit) kinda cheating as its pretty much an engine, running gear and sitting on top of that a pair of racing seats and a beetle shell. But scary fast!

type 4 2litre from bay window Kombi

Stroker crank

105mm piston/barrell kit

hydraulic cam and lifters

balance bottom end(shot peen rods etc)

lighten flywheel

Autronic ecu

Aftermarket fuel injection set up

big valves

match porting and porting of cylinder heads

CES custom exhaust system

That combo would produce 300hp and 300 foot pounds of torque. (have a mate with similiar spec engine in an offroader and that's what he got on a dyno with a compression ratio of 8.2:1)

This what I'm considering putting in my 76 Kombi.

So look out Stivo's here comes the orange and white block of flats. :P

If you don't believe me ask Northy... he's seen it with the old engine ;)

negatron Grand Master

negatron

Posted
  • Author
Posted

NIce plan silva!

But the most important thing in a kombi is what colored furry dice? and what curtains ur're going to put on? :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing



  • Join The Club

    Join the Toyota Owners Club and be part of the Community. It's FREE!

  • Latest Postings

    1. 18

      High idling on the 2zzge even when warm (solved!)

      i am in sydney, just got 1992 tarago, same problem, 2k idle speed when engine warm, changed the whole throttle body, ECU, still same, help pls in sydney 0405987988
      moxabest in Corolla / Corolla Sportivo Club
    2. 5

      High RPM Idle after the engine warm up.

      i have same problem, already changed throttle body, ecm modle, help pls
      moxabest in Inside and Out
    3. 0

      Tow bar

      Hi guys, Just bought my new Landcruiser Prado yesterday. What is the difference between Onroad Towner and Off road Towbar
      Kiru in Prado Club
    4. 3

      Disconnecting winch, lightbar and UHF

      Generally, yes. In the 60s, and earlier, there were cars with positive grounds, so I'm always a bit hesitant to say the negative wire. It is always the one that bolts to the body. Herb
      ozieagle in Landcruiser Club
    5. 0

      2011 Land Cruiser 1VD-FTV Engine Won't Start After Overhaul

      Hi everyone, I have a 2011 Land Cruiser VDJ200 with a 1VD-FTV engine. I recently had the engine fully overhauled due to a blown head gasket. However, after the overhaul, the engine is not starting. It only cranks but doesn't fire. I've checked the following DTC codes: Internal memory EEPROM error Low rail pressure The actual rail pressure data shows: 240 bar during cranking 61 bar when ignition is off Based on these findings, I suspect the following potential causes: =Defective Diesel High-Pressure Pump =Leaking Piezoelectric Injectors =Diesel Fuel Bypassing to the DPF Circuit =Faulty Injector Drivers I'm hoping for some expert advice to help diagnose and resolve this problem I'm seeking expert advice on how to troubleshoot and resolve this issue. Any suggestions or guidance would be greatly appreciated.
      kevin200 in Landcruiser Club
    6. 3

      Disconnecting winch, lightbar and UHF

      Okay this might be dumb but it the ground the negative?
      citrus__grove in Landcruiser Club
    7. 3

      Disconnecting winch, lightbar and UHF

      Disconnecting batteries, ALWAYS disconnect the ground wire first. Doing this will also disconnect power, in general. Herb
      ozieagle in Landcruiser Club
    8. 3

      Disconnecting winch, lightbar and UHF

      Hey guys, I’m wanting to disconnect my current winch, lightbar and UHF as I have new plans. I’ve installed a winch previously on another car so I get it’s a case of following the cables and disconnecting from the battery, etc but but safety wise, should I start by disconnecting the battery so the cables aren’t live orrrr? And if so how do it go this haha?
      citrus__grove in Landcruiser Club
    9. 1

      Snapping wheel and axle studs

      Put a set of standard wheels on it and your problem will disappear. It is critical that the hole in the wheel centre is a snug fit on the axle boss (without wheel nuts fitted). If your wheels are sloppy on the axle boss this allows excess force on your wheel studs and they will break, as yours are doing. If you are unsure of what to do, go to a reputable tyre shop and get assistance.
      32V8 in Landcruiser Club
    10. 0

      2zz idle / roughness when accelerating past 3k

      Hey everyone was hoping someone might be able to point me in the right direction with this issue I've been facing for a while now. My Celica's idle will drop down to almost 200rpm when stationery after hitting operating temperature. Pretty much feels like it's about to stall out but never actually does. When taking off from a set of lights it almost feels like it hesitates or is down on power and then all of a sudden it lurches forward and gets a boost in power again. Then again around 1,500-3,000rpm it feels down on power and in what I can only describe in the engine feeling scratchy. Past 3,000 rpm it gets a little boost in power again but still definitely feels down on power compared to what it used to be and still has that roughness. Note lift is also not working at the moment but I have changed the lift bolts, planning on cleaning the VVT and VVTL-i OCV's New engine mounts have been installed I changed the MAF sensor about 4 years ago albeit not OEM. After doing some research my main ideas now would be a New MAF this time OEM, TPS, IACV or Coil Packs (Changed plugs 50,000km ago) Any other suggestions would be greatly appreciated!!! :)
      ik04 in Celica Club
×
×
  • Create New...

Forums

News

Membership