I have for sale a set of RDA Slotted rotors for a Mitsubishi 380 and a pair of aluminium hubcentric rings to allow it to mount to most Camry/Aurion hubs (71mm to 62mm rings). They are painted satin black with overspray on the braking surface (which will go away once you apply the brakes). These can be used to upgrade your Camry or Aurion to a 302x18mm using a set of rear Mitsubishi 380 calipers. Project was canned as I ended up splurging (bigtime) and buying a set of TRD Aurion rear calipers instead. While I am not 100% certain they will directly bolt on, after abit of sniffing around I was certain they should. As a result of some findings in the Aurion Brake thread, I could deduce the following: - Aurion + Gen6 Camry: Will definitely need to have a bracket made up as the bracket holes are not the same at the 380 ones, brake lines should bolt on no problem. - Gen5 Camry and below: Appears to be a direct bolt on, but couldn't confirm as I wasn't able to get my hands on a set of 380 calipers to confirm, brake lines should bolt on with no problem. Paid $250 off ebay. Instant: $130 + postage.