Jump to content

Recommended Posts

This is the offical CAI/SRI buyers guide, its purpose is let new members know of the different intakes available to them, and hopefully stop the never ending ''where can i buy a cai from''?

All members are welcome to post up intakes they know of, state the brand, price, specs and any other relative information you think members should know, if you know of a good dealer or have seen an intake on special post it up

ces_racing_logo.gif

intake: cai 1zz, 2zz available

construction: 1zz - 2.5inch HPC coated mandrel-bent stainless. facelift/prefacelift available K&N filter, 2zz - 3inch HPC coated mild steel with maf reducer K&N filter

available from: CES racing

price: 2zz-$512 1zz-$407

country: Australia

ToyotaCorollar-Sportiuo_C1AIKit_1.jpg

trd-2_black.gif

intake: cai

construction: powder coated candy apple red, mandrel-bent aluminium with trd filter.

available from: ebay/castlehill toyota

price:$250 US, shipping included

country: USA

l_0090.jpg

plazma_logo_2.jpg

intake: cai

construction: polished mandrel-bent aluminium with K&N filter

available from: plazmaman.com

price:$345

country:Australia

Khoury20FOCUS20100_2708-1.jpg

prfrmnce_web.jpg

intake: sri 69 series typhoon

construction: polished mandrel-bent aluminum

available from: sxd, autobarn, rocket industries, ebay

price: $230

country: USA

69-8601TP.jpg

LOGO_100535.gif

intake: sri

construction: polished mandrel-bent aluminum

available from:wscp.com/ebay

price:$130 US

country: USA

805-143-101.jpg

Ive posted up a few to get it started, remember this is not a CAI/SRI discussion about what ones best so keep it clean and to the point

Edited by spillige
  • Like 1
Link to post
Share on other sites
  • Replies 79
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

This is the offical CAI/SRI buyers guide, its purpose is let new members know of the different intakes available to them, and hopefully stop the never ending ''where can i buy a cai from''? All membe

I have the same K&N also and love it, I could have found it a little cheaper on ebay, but I wanted a valid warranty so I got it at here. K&N 69-8601TP, or you can try one of the vendors on the

Another one for the ZRE.. Takeda Intake by Advanced FLOW Engineering Type: SRI w/ heatshield Origin: USA Price: ~$271.94 + $103.75 (shipping) - eBay Construction: Lightweight clear-coat anodize

Posted Images

Dunno where you's can get a C.E.S CAI but i picked it up from the Buy And Sell section. Fits good, works good, sounds good, dunno about performance but it may be a placebo cause it sounds faster lol. got it for $300.

Link to post
Share on other sites
CES stands for Custom Exhaust Specialists,

and they are located up here in QLD, just outside of Brisbane... so postage down south could be a pain... etc.

Evo

I beg to differ.

Got 4 shipped down here for between 50 -> 100.

From memory i think its 67 but don't quote me on it. Takes about 3 -> 4 working days to get it.

Link to post
Share on other sites

The TRD cai is actually from USA not Japan. Its a TRD USA listing.

Good thread though. Hopefully it will be pinned so we don't have to keep bumping it up.

Link to post
Share on other sites

some links might help spil,

http://www.chtoyota.com.au/parts.asp

according to doriae's post this fits the rolla,

http://cgi.ebay.com/ebaymotors/TOYOTA-MATR...sQ5fAccessories

this is where i got mine a year or so ago...

http://stores.shop.ebay.com/CONICELLI-PART...p;submit=Search

according to the seller this is for the 2zz

http://cgi.ebay.com/ebaymotors/NEW-TRD-COL...sQ5fAccessories

this is for the 1zz

http://cgi.ebay.com/ebaymotors/NEW-TRD-COL...sQ5fAccessories

but im pretty sure all of them are the same? can someone clear this up before posting it up the top?

Link to post
Share on other sites

CES do CAI's as well as Exhaust systems and will freight anywhere in Australia.

Spillage edit the 2ZZ CAI for CES please. It is mild steel HPC coated.

Also the TRD CAI is not made to fit the Aus spec Corolla's in true form. It does fit but some of the mounts will need tweaking to line up and fit right.

Also all facelift Corolla's will need to modify the body where the hole is behind the headlight for the pipe to go through as the facelift headlight has a larger and deeper backing so room is very limited.

Link to post
Share on other sites

thanks for clearing that up And1, Silvabullit. kenneth there all the same, just different sellers but good work posting up different options.

main_logo.jpg

intake: cai

construction: 2 3/4" or 70mm flared to 3 on inlet and outlet, mandrel bent aluminium Finish is Raw Aluminium Tube, non polished. (can be anodised or ceramic coated) Hurricane Air Filter, Guaze Material

available from: liverpool exhaust

price: $350

country: australia

NewPicture.png

logo_apexi.gif

intake: sri, Apexi power intake

construction: cast aluminium

available from: nengun

price: $160

country: japan

turp_0812_65_zsubaru_wrx_sti_buyers.jpg

injen_logo.gif

intake: cai

model number: RD2075(P/B/R) for one piece

RD2076(P/B/R) for two piece

construction: mandrel-bent polished aluminium

available from: psi products/jdm yard/ebay

price: $280

country: USA

SP2077.jpg

aem-logo-400.jpg

intake: cai/sri

construction: mandrel-bent polished aluminium, also available in a range of powder coated colors red/blue/silver

available from: ebay/Allstar Garage/Quantum Racing/The Tuners Group

price: cai - $280 sri - $240

country: USA

AEM20Cold20Air20Intake20System20Sil.jpg

representative photo only, if some one has a better AEM photo pm me

Edited by Kenshin X
Link to post
Share on other sites

unifilt2.jpg

intake: sri

construction: spun aluminium ram adapter kit/foam filter

available from: uni filter australia/mrt

price: $350

country: Australia

rpod.jpg

above picture shown with out adapter kit

logo_pipercross_773_border.jpg

intake: sri

construction: aluminium adapter kit/foam filter

available from: pipercross shop online

price: £98

country: UK

pk324_after.jpg

Link to post
Share on other sites
Good filter option would be the K&N RX3900-1

You can get this from any autobarn for around $90ish. When I called up the one in Auburn Sydney they didn't have any in stock but can order them in from their supplier

Also this pod filter is good for those buying a TRD CAI for a facelift sportivo and don't want to remove their foglight

Linky: http://www.autobarn.com.au/products/11/79/3302518

prod_1190871756.jpg

Link to post
Share on other sites

Always be on the lookout for sales at autobarn, cause I picked up two K&N xtreme filters for $40 each.

May as well add the filter cleaning products, so that people can clean their filters out?

Link to post
Share on other sites
Always be on the lookout for sales at autobarn, cause I picked up two K&N xtreme filters for $40 each.

May as well add the filter cleaning products, so that people can clean their filters out?

sounds like a plan, go for it

do we wish to add the legality of the above products, some are and some arent

whitestivo

if you know the legality of the above products, post it up

Link to post
Share on other sites
  • 2 weeks later...
  • 1 month later...

Im looking at getting a CAI for my rolla after I sort out wheels and 4WD height. With my GTI, I just had a pod attached which performed well until it started sucking in hot air. So my next couple of cars I had cold air boxes. These consisted of funnel above radiator directing air into sealed filter box with K&N panel filter equipped. These worked a treat. This is what I would like for my rolla. The only options I am seeing is pod on arm with custom shroud built around.

I guess my question is, Is there a cold air box style set up?

Link to post
Share on other sites
  • 1 month later...

There's Spectre performance from the US

www.spectreperformance.com

They sell at autobarn, not sure if they sell at any other place.

You can buy the parts seperately if you want a cai or sri.

Pretty good and cheap as well, i bought some parts to make a sri and it was pretty good.

cost me all up about $100 using a Drift pod filter

post-4178-1250030110_thumb.jpg

Link to post
Share on other sites
  • 2 months later...

Weapon-R secret RAM AIR intake kit for ZRE corolla.

I found this on eBay US and the price is pretty good compared with others.

Price: USD$213 + USD$61.2 shipping = USD$274.2 around AUD$299

Here is the Link with the discription of this CAI.

4021444577_c8e35545e7.jpg

Edited by 38TRY
Link to post
Share on other sites
  • 1 month later...
Weapon-R secret RAM AIR intake kit for ZRE corolla.

I found this on eBay US and the price is pretty good compared with others.

Price: USD$213 + USD$61.2 shipping = USD$274.2 around AUD$299

Here is the Link with the discription of this CAI.

4021444577_c8e35545e7.jpg

great find :) terry

Link to post
Share on other sites

Another one for the ZRE..

Takeda Intake by Advanced FLOW Engineering

TR-2006P_400.jpg

Type: SRI w/ heatshield

Origin: USA

Price: ~$271.94 + $103.75 (shipping) - eBay

Construction: Lightweight clear-coat anodized tubing w/ dry filter (PRO Dry S)

  • Like 1
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.






Toyota Owners Club AU © 2020 | This Website has no association with Toyota (AU) or Toyota Motor Corporation. | Cookies | Privacy Policy | Terms & Conditions

×
×
  • Create New...