Aurion Wheels / Rims / Tyres / Tires Specification Thread

[mmm_sx6]

If u dont mind, could someone please explain to me the safety risk involved here? or link me to where it was explained and also what the middle number before the 'R' means. Thanks!

235/45/20

235 refers to the width, 45 refers to the Aspect ratio, and 20 for the rim size. http://www.carbonbla...nformation.aspx

Messing with the wheels in changing the rim size and tyre profile will mess with the speedo reading. It'll inaccurately point somewhere where in fact you might be actually going slower / faster hence safety and obvious financial problems, like speeding..

If u dont mind, could someone please explain to me the safety risk involved here?

Messing with the wheels in changing the rim size and tyre profile will mess with the speedo reading. It'll inaccurately point somewhere where in fact you might be actually going slower / faster hence safety and obvious financial problems, like speeding..

Not only that, if you mess with your rolling diameter to the point that it is a fair bit of a change (3% is usually the maximum change recommended), if this is in the negative direction (smaller) then that means that for a given speed, your wheels will be rotating faster. Your brakes will then be working harder as a result.

Thanks, That link is helpful!

[RickyZR6]

Hi All,

It has been a while since i've posted somthing so hope this helps as most of the time I need the help..lol

My Set up:

19" Lenso Type M ( Black with Red Lip )

Sitting on Kuhmo CCST Sports 235/35R19 - VERY NOISY TYRE

Lowered Using Pedders Sport Ryders Dropped 2" all round

NO RUBBING but sometimes too low for peoples drive ways.

Im Looking at putting the stock Sportivo Rims back on.....Do want to sell my Lenzo's if anyone is interested or will swap for stock with added money

Can contact me on 0431144069.

Thanks

[ddr11]

My setup

Wheels - Zumbo Kuverup 20" x 8.5 +38 offset, 225/30/20 tyres

Suspension - Pedders Sports Ryder springs, ride comfort and handling has improved over stock which was a big suprise, no rubbing at all, could be a bit more lower but i guess the springs need abit of time to settle.

No issues so far.............

Edited October 14, 2010 by ddr11

[-DAvo]

Wheel Brand: LWT EQUUS

Wheel Size: 19"

Wheel Width: 8"

Wheel Offset: +38

Tyre Size: 245/35/R19 PDW Altenzo

Tyre Pressures: 40psi

Suspension Type: Pedders Extreme XA Coilovers (set up mainly for comfort)/Ultra Racing strut brace & Ultra Racing rear sway bar

Feedback: Very happy so far, tires a bit noiser than my previous RE001, but still bearable. will upgrade tires to RE050A once these wear out...

[00UCH]

Now how many ppl running 20" and even 19" have the right load rated tyres :P that's another thing that should of been asked..

[Adamsy]

Wheel Brand/Design: Advanti Gauntlet

Wheel size: 19Inch

Wheel width: 8.5

Wheel offset: +45 If I'm not Mistaken

Tire size: 245/35 ZR19 93Y Falken FK452 Directional

Suspension type: Standard Sportivo Chassis bracing, TRD Aurion Shock Absorbers, TRD Springs from the US of A. Ultra Racing 19mm roll bar and Strut Tower Brace, Peddars front/Rear Camber bolts.

Feedback: Turns in sharply, corners flat and allows you too use a few more of those killer wasps more often. FK452's have tonnes of grip in both the wet and dry a little noisy for the first few thousands kays but soons settles down after that.

[Adamsy]

Now how many ppl running 20" and even 19" have the right load rated tyres :P that's another thing that should of been asked..

crap?? i'd like to think that everybody is running atleast "93" speed rated tyres? otherwise your basically screwed????

[jaysonn341]

Wheel Brand/Design: Vertini Savari

Wheel size: 18"

Wheel width: 8 inch

Wheel offset: +35 mm

Tire size: 235/40/R18

Suspension type: Stock at-x, will lower for better look later...

Edited June 7, 2011 by jaysonn341

[jrhowie]

Wheel Brand/Design: XHP

Wheel size: 20 inch

Wheel width: 8.5

Wheel offset: <eg. +45, +35 mm etc> Unsure at this stage

Tyre size: Front and Rear indentical 235/35/R20

Tyre Brand : Nankang Ultra Sport (very noisey, Increased cabin noise by about 50%)

Suspension type: Standard SX6 09 Upgrade

Feedback: Only fitted them on Tuesday , No problems as yet

Bought Them From Bob Jane Bankstown

Also looking around for 09 upgrade SX6 wheels and Tyres, The ones i traded in were sold a bit 2 quick .

May be bringing up old issues, but just curious as to how your wheels have performed?

I'm assuming you had no problems fitting 20" to the sportivo? No rubbing etc? Did you have to mod anything to fit the rims?

[VF-X]

May be bringing up old issues, but just curious as to how your wheels have performed?

I'm assuming you had no problems fitting 20" to the sportivo? No rubbing etc? Did you have to mod anything to fit the rims?

There are many guys here running on 20s. Most of them have no problem, dpending on the tire size, offset of your wheels, and how low you low your car. Some who are running lower offset / wider wheels have their guards rolled. Other than that, they live with their scrubs.

[Shadow_]

i got my 20inch rim 8.5 45 offset 245-35-20 on kumho ku19 with kingsprings it seats in a perfect height even with full loads. but the only thing it increase alots weight to the steering wheel it heaver then my 18 inch rims you can see them in my pictures

[2muchcoffeecam]

So I've got a novice question I'm afraid - will ford tyres fit 2009 Aurion?? I seem to see some adverts stating fit ford, honda accord, toyota ????

[VF-X]

Ford states their stud pattern is 5x114.3. So technically it will fit.

[MrRob]

So I've got a novice question I'm afraid - will ford tyres fit 2009 Aurion?? I seem to see some adverts stating fit ford, honda accord, toyota ????

Tyres or wheels?

[2muchcoffeecam]

Sorry wheels. I have been trying to source (yes should probably just measure) the stud pattern details for aurion - not that easy to simply locate.

...Thanks Vick

[Kezzby]

Sorry wheels. I have been trying to source (yes should probably just measure) the stud pattern details for aurion - not that easy to simply locate.

...Thanks Vick

Just had mine fitted. Stud pattern is 5x114.3, same as Camry's etc.

[xCalibur_]

Wheel Brand/Design: Axis Hiro

Wheel size: 19"

Wheel width: 8.5 inch

Wheel offset: unsure

Tire size: 245/35/R19

Suspension type: BC Racing BR Type coilovers

[TRD69]

Size 20"

Wheel Width 8.5

Suspension Stock TRD

Tyre 225/35/20: The place I got my wheels told me if I go 20's I'll need to go 225s otherwise it'll scrub at the back. Anyone running 245/35/20 with stock or lowered suspension and no dramas with it?

[MrMeToo]

Wheel Brand/Design: ANZ Revolution in chrome

Wheel size: 18"

Wheel width: 8"

Wheel offset: +45mm

Tire size: 225/45/18

Suspension type: Stock Prodigy springs, soon to be King

Feedback: Standard size/spec for Toyota Aurion Kappa wheels, good ride, no change in speedometer.

[Couzellion]

Wheel Brand/Design: Advan Racing RG-D

Wheel size: 19"

Wheel width: 8.5" & 9.5"

Wheel offset: +25mm

Tire size: 225/35/19 & 235/35/19

Suspension type: BC BR Coilovers

Feedback: Scrubbed heaps on the king springs, put in the BCs and with rolling, flaring and praying only scrubs on large bumps.

[bigVAN]

FIRST SETUP

Wheel Brand/Design: forgot

Wheel size: 19"

Wheel width: 8.5"

Wheel offset: +38mm

Tire size: 245 / 35 / 19

Suspension type: King Springs

Feedback: no problems at all

___________________________________________________________________________

SECOND SETUP

Wheel Brand/Design: bbs lm

Wheel size: 18"

Wheel width: 9" & 10"

Wheel offset: +35mm & +20mm

Tire size: 245 / 40 / 18

Suspension type: BC BR Coilovers with rear camber bolts

Feedback: depends how low you go , had to pump the rear guards, and now it sits near the side wall, scrubs on turn or with full load

[frenchmansam]

Wheel Brand: Lenso Como. Hyper Black

Wheel Size: 20"

Wheel Width: 8.5"

Wheel Offset: +43mm

Tyre Size: 245/35/R20 Kumho KU31

Tyre Pressures: 40psi allround

Suspension Type: Stock Sportivo

Feedback: Only got them today, however drove home on them from the Gold Coast to Brisbane. So far so good. No scrubbing around tight corners on my street. Slightly noisier tyres than the stock Michelin tyres but not by much at all. Negligible change in speedo reading (1% or thereabouts). Very happy with them so far, hopefully there's no problems in the future

[shittywok]

Wheel brand: Stance sc-6ix

Wheel size: 19inch

Wheel width: 8.5inch

Offset: +28mm allround

Tyre pressure: 38psi (not sure if this is suitable)

Suspension: BC BR Coilovers withe 250mm extender for rears (approx 50mm poke between rear seat and shelf)

General: Car lowered, no scrubbing so far (only three people tried in car), no rolling or pumping of guards, front looks quite flush, rear could do with a spacer

[whitezr6]

Wheel Brand/Design: Avant Garde M550

Wheel size: 19

Wheel width: 9.5

Wheel offset: +42

Tire size: 235/35 R19 PDW Altenzo's 93W

Suspension type: BC Racing Coilovers 8kg F 4.5kg R, UR strut bar & rsb, Will adjust front camber -1.5 to -2

Feedback: Scrubs with full load and hard bumps, High road noise with tyres

https://scontent-a-sin.xx.fbcdn.net/hphotos-ash2/t31.0-8/812585_10200855618926937_343770132_o.jpg

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/1097081_10200855619246945_746164655_o.jpg

https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xfa1/t31.0-8/1149552_10200855619526952_1259846401_o.jpg

Edited June 18, 2014 by whitezr6

[Canyonero]

Hi guys. I'm looking at swapping my stock 16" wheels for a set of 18"s from a Territory.

Would someone be able to rattle off what the 18" wheel specs for the Aurions? I'm hoping they're not too far from the Territory specs.

I believe the territory is 7.5" in width.